gr1d-init/p2pMeshCommLearningKitFor this project, our main targeted users were particularly the high school students who are able to comprehend most basic peer-to-peer mesh communication knowledge which often included in STEM subject syllabus such as…
P2PNode THT is an open-source printed circuit board by gr1d-init, from the gr1d-init/p2pMeshCommLearningKit repository on GitHub, published under the MIT licence. It is a 2-layer board of 98.5 × 72 mm with 19 parts on 54 nets, routed with 130 tracks and 0 vias.
It is built around the NRF24L01. Its parts include 4 switches, 3 resistors, 3 diodes, 2 ICs and 1 capacitor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
For this project, our main targeted users were particularly the high school students who are able to comprehend most basic peer-to-peer mesh communication knowledge which often included in STEM subject syllabus such as Computer Science and Physics subject.
Other than that, students are also exposed to an exciting involvement in Arduino kit development, lies under the usage of microcontrollers, which is a foundational skillset for their Reka Bentuk Teknologi subject that includes hardware and software implementations.
In short, we want student to head the ground up, build up a Peer-to-Peer Mesh Communication Device on their own with given instructions manual, enhance their practical skills on utilise a microcontroller and strengthen their understanding towards wireless communication protocols.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 3 | 330R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3 |
| 3 | LED | LED_THT:LED_D3.0mm | D1, D2, D3 |
| 3 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1, SW2, SW3 |
| 1 | 10uf | Capacitor_THT:CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C1 |
| 1 | 2465 | 2465:MODULE_2465 | U2 |
| 1 | 3.7V | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | NRF24L01 | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U1 |
| 1 | SW_Nidec_CAS-120A1 | Button_Switch_SMD:Nidec_Copal_CAS-120A | SW4 |
It measures 98.5 × 72 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the NRF24L01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gr1d-init/p2pMeshCommLearningKit repository on GitHub, at the commit this page was made from: the board is kicadModels/P2PNode_THT/P2PNode_THT.kicad_pcb and its schematic kicadModels/P2PNode_SMD/P2PNode_SMD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
gr1d-init/p2pMeshCommLearningKit
For this project, our main targeted users were particularly the high school students who are able to comprehend most basic peer-to-peer mesh communication knowledge which often included in STEM subject syllabus such as…
NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover
DAlexis/caustic-lasertag-system
Caustic project is a full-featured indoor and outdoor lasertag system
CGrassin/biosignals
Board for the acquisition of bio-potentials (EMG, ECG, EEG, etc.).
microdynamics-robot-quadcopter/breeze_electronics_design
This project is created and managed by EDA softwares, which contains the breeze quadcopter's component library, footprint library, schematic, printed circuit boards, etc.
