2 layers100.3 × 101.6 mm
Eeg pcb v4
Spiros7bit/SSVEP-Based-Brain-Computer-Interface-BCI
This repository contains the code and hardware design used in my thesis on Steady-State Visually Evoked Potential (SSVEP) Brain-Computer Interfaces.
75 parts
2 layers70 × 50 mm
Fuel capacity sensor
gpgreen/fuel_capacity_sensorKiCAD hardware design for Fuel Tank Capacity Sensor for capacitance style RV tank with CAN output
- Size
- 70 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 87
- Nets
- 106
- Pads
- 293
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 12 Aug 2018
- Updated
- 15 Dec 2020
Overview
Fuel capacity sensor is an open-source printed circuit board by gpgreen, from the gpgreen/fuel_capacity_sensor repository on GitHub. It is a 2-layer board of 70 × 50 mm with 87 parts on 106 nets.
It is built around the AT90CAN64-16AU, MCP2551-I/SN and ADUM1201CR, with the LT1491AIN among its other parts. Its parts include 26 capacitors, 25 resistors, 7 ICs, 6 diodes and 5 connectors. It belongs with the sensors and measurement boards of this library.
Main components
4
AT90CAN64-16AU
QFP-64(14x14)-40℃~+85℃ 10bit 16MHz 2.7V~5.5V 2KB 4KB 53 64KB 8 Bit AVR Built-in FLASH QFP-64(14x14) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
MCP2551-I/SN
SOIC-8-40℃~+85℃ 1Mbps 365uA 4.5V~5.5V 75mA CAN Transceiver SOIC-8 CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversADUM1201CR
SOIC-8-40℃~+125℃ 1 1 2 2.7V~5.5V 2.7V~5.5V 2500 25Mbps 25kV/us 45ns Bidirectional signal isolation、Multi-voltage domain interface SOIC-8 Digital IsolatorsAnalog DevicesDigital Isolators
LT1491AIN
PDIP-14-40℃~+85℃ 2.5V~44V 44V 500uV 50nV/√Hz@1kHz 60V/ms 6uV/℃ 8nA 98dB Four channels PDIP-14 Operational Amplifier ROHSAnalog DevicesOperational Amplifier
Parts
87| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100nF | Capacitors_SMD:C_0603 | C3, C5, C6, C10, C11, C12, C13, C14, C17, C19, C20, C21, C22, C24 |
| 6 | 100K | Resistors_SMD:R_0603 | R5, R6, R7, R9, R10, R11 |
| 6 | TEST | Measurement_Points:Test_Point_Keystone_5015_Micro-Minature | TP1, TP2, TP3, TP4, TP5, TP6 |
| 5 | 1K | Resistors_SMD:R_0603 | R1, R13, R20, R23, R25 |
| 4 | 470K | Resistors_SMD:R_0603 | R8, R17, R18, R22 |
| 3 | 1M | Resistors_SMD:R_0603 | R4, R12, R14 |
| 2 | 100K | Potentiometers:Potentiometer_Trimmer_Copal_CT-6EP | RV2, RV3 |
| 2 | 10nF | Capacitors_SMD:C_0603 | C25, C26 |
| 2 | 1N4148 | Diodes_SMD:D_SOD-123F | D3, D4 |
| 2 | 220pF | Capacitors_SMD:C_0603 | C7, C9 |
| 2 | 22pF | Capacitors_SMD:C_0603 | C16, C18 |
| 2 | 330K | Resistors_SMD:R_0603 | R15, R16 |
| 2 | YLW | Diodes_SMD:D_SOD-123F | D5, D6 |
| 1 | .33uF | Capacitors_SMD:C_0603 | C2 |
| 1 | 10 | Resistors_SMD:R_0603 | R3 |
| 1 | 100uF | Capacitors_SMD:C_0603 | C1 |
| 1 | 10K | Resistors_SMD:R_0603 | R24 |
| 1 | 10V | Diodes_SMD:D_SOD-123F | D1 |
| 1 | 10uF | Capacitors_SMD:C_0603 | C15 |
| 1 | 10uF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Reflow | C23 |
| 1 | 10uH | Inductors_SMD:L_1206 | L1 |
| 1 | 150K | Resistors_SMD:R_0603 | R21 |
| 1 | 16MHz | Crystals:Crystal_SMD_HC49-SD | Y1 |
| 1 | 1M | Potentiometers:Potentiometer_Trimmer_Copal_CT-6EP | RV1 |
| 1 | 2.2uF | Capacitors_SMD:C_0603 | C8 |
| 1 | 360pF | Capacitors_SMD:C_0603 | C4 |
| 1 | 39 | Resistors_SMD:R_0603 | R2 |
| 1 | 4.7K | Resistors_SMD:R_0603 | R19 |
| 1 | ADuM1201CR | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U3 |
| 1 | AT90CAN64-16AU | Housings_QFP:TQFP-64_10x10mm_Pitch0.5mm | U7 |
| 1 | BCW65CLT1G | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | CAN1 | Connectors_JST:JST_XH_B06B-XH-A_06x2.50mm_Straight | J1 |
| 1 | CAN2 | Connectors_JST:JST_XH_B06B-XH-A_06x2.50mm_Straight | J2 |
| 1 | Conn_Coaxial | Connectors:bnc-ci | J4 |
| 1 | DCP01B | CustomComponents:DCP01B_SO_7_14 | U4 |
| 1 | Fuse | Fuse_Holders_and_Fuses:Fuse_SMD1206_Reflow | F1 |
| 1 | ISP | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | J3 |
| 1 | LM78M05_TO252 | TO_SOT_Packages_SMD:TO-252-2 | U1 |
| 1 | LT1490A | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U5 |
| 1 | LT1491A | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U2 |
| 1 | MCP2551-I/SN | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U6 |
| 1 | RED | Diodes_SMD:D_SOD-123F | D2 |
| 1 | SERIAL | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J5 |
| 1 | SW_Push | CustomComponents:switch-kpt-1187B-SMD | SW1 |
The 83 most common of 87 parts.
Questions
How big is the Fuel capacity sensor PCB?
It measures 70 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fuel capacity sensor use?
87 parts, built around the AT90CAN64-16AU, MCP2551-I/SN, ADUM1201CR and LT1491AIN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fuel capacity sensor KiCad files?
From the gpgreen/fuel_capacity_sensor repository on GitHub, at the commit this page was made from: the board is fuel_capacity_sensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fuel capacity sensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask gpgreen before reusing the design.
Similar boards
- 2 layers68 × 31 mm
- 4 layers83.4 × 68.5 mm
Ms3
pggood/Megasquirt-MS3-Bootloader
Bootloader to initialise MS3 if you need to replace the HCS12
82 parts7 - 2 layers109 × 95 mm
- 2 layers140 × 178.7 mm
- 2 layers256.5 × 172.9 mm
- 2 layers239.3 × 121.3 mm
- 2 layers35.1 × 62.7 mm
EMO SN65 OBD
darshanram008/EMO_OBD_tool
On board diagnostic tool for Battery management system
116 parts1