Govind2442/avionics-workshopAvionics workshop is an open-source printed circuit board by Govind2442, from the Govind2442/avionics-workshop repository on GitHub. It is a 2-layer board of 69.7 × 64.8 mm with 13 parts on 38 nets, routed with 141 tracks and 17 vias.
It is built around the BMP280 and AMS1117-3.3. Its parts include 5 ICs, 3 resistors and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 330 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1, R2, R3 |
| 1 | AMS1117-3.3 | GovindLibrary:AMS-1117 | U4 |
| 1 | Arduino_Nano_v2.x | Module:Arduino_Nano | A1 |
| 1 | BMP280 | GovindLibrary:BMP280 | U1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LED | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm | D2 |
| 1 | LED | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm_Clear | D3 |
| 1 | LOGO | sedsskillup:sedslogo | G*** |
| 1 | ~ | GovindLibrary:AS32-TTL100 | U5 |
| 1 | ~ | GovindLibrary:Sd card module | U3 |
| 1 | ~ | GovindLibrary:MPU-6050 | U2 |
It measures 69.7 × 64.8 mm and has 2 copper layers, 1.6 mm thick.
13 parts, built around the BMP280 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Govind2442/avionics-workshop repository on GitHub, at the commit this page was made from: the board is avionics workshop.kicad_pcb and its schematic avionics workshop.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Govind2442 before reusing the design.
ajisrawi/dronemagnav
Magnetic-anomaly navigation (MagNav) board + firmware for drones: ESP32-S3, BMI088, LIS3MDL, BMP280, u-blox GNSS, WDMAM map matching, particle filter, MAVLink, phone route planner. Proprietary - all rights reserved.
danheeks/vario
paragliding vario with arduino nano, piezo sounder, bmp180 altimeter, 4x Nimh batterys
Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI
zeodotdev/zeo-boards
ESP32-S3 development board with onboard BME280 (temperature, humidity, pressure) and LSM6DS3 (6-axis IMU) sensors. This repo contains the designs, ESP-IDF firmware, and a Python plotter for visualization.
alihaanc/SKYKILLER-Development-Board
Drone and Rocket Development PCB board
