4 layers31.6 × 84.1 mm
MCL68
MicroCoreLabs/Projects
Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.
13 parts534
4 layers100 × 85 mm
AmalokCape
GoTouch-TEC/alamok-PCBRepositorio para el control de versiones del diseño de CNC para El gps Alamok
- Size
- 100 × 85 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 83
- Pads
- 119
- Tracks, vias
- 112, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Apr 2018
- Updated
- 27 May 2018
Overview
AmalokCape is an open-source printed circuit board by GoTouch-TEC, from the GoTouch-TEC/alamok-PCB repository on GitHub. It is a 4-layer board of 100 × 85 mm with 13 parts on 83 nets, routed with 112 tracks and 2 vias.
Its parts include 7 connectors, 3 resistors, 2 diodes and 1 switch.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 330Ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R4 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4, J5 |
| 2 | LED | LED_THT:LED_D3.0mm | D1, D2 |
| 2 | ~ | PocketBeagle.pretty:TH-2X18-(35MIL-DIA)-W_O-SILK | P1, P2 |
| 1 | 1kOhm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | FONA800H | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J2 |
| 1 | PowerBoost_1000C | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | UltimateGPS | Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_Vertical | J3 |
Questions
How big is the AmalokCape PCB?
It measures 100 × 85 mm and has 4 copper layers, 1.6 mm thick.
What parts does the AmalokCape use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AmalokCape KiCad files?
From the GoTouch-TEC/alamok-PCB repository on GitHub, at the commit this page was made from: the board is AmalokCape.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the AmalokCape design in my own project?
Its repository states no licence, so its author keeps all rights: ask GoTouch-TEC before reusing the design.
Similar boards
- 4 layers33 × 32 mm
Doorman slot programmer
AzonInc/Doorman
ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)
13 parts252GPL-3.0 - 4 layers25 × 20.5 mm
Refclk breakout
loxodes/vna
Under development open hardware microwave vector network analyzer
13 parts205 - 4 layers59 × 20 mm
- 4 layers62 × 10 mm
Pc healthypi move program adapter v7
Protocentral/healthypi-move-hw
Hardware files for the HealthyPi Move
13 parts160MIT - 4 layers88.9 × 19.2 mm
- 4 layers14 × 23.2 mm
Qspimux2
felixheld/qspimux
QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests
13 parts57CC-BY-SA-4.0 - 4 layers18 × 16.5 mm
UDB
Unified-Daughterboard/UDB-C-EZM
For more details on the Unified Daughterboard project, see the main website.
13 parts45MIT