

Mod Temp Driver
- Size
- 70 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 85
- Nets
- 84
- Pads
- 257
- Tracks, vias
- 490, 24
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 May 2020
- Updated
- 28 Oct 2020
Overview
Mod Temp Driver is an open-source printed circuit board by Gonzalogontad, from the Gonzalogontad/ProyectoFinalCESEGG repository on GitHub. It is a 2-layer board of 70 × 100 mm with 85 parts on 84 nets, routed with 490 tracks and 24 vias.
It is built around the LM2904 and BC857. Its parts include 37 resistors, 8 capacitors, 8 diodes, 6 connectors and 4 ICs.
Main components
2Parts
85| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R312, R317, R401, R403, R404, R405, R412, R501 |
| 8 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H201, H202, H203, H204, H501, H502, H503, H504 |
| 6 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D201, D401, D402, D403, D501, D502 |
| 5 | 1nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C301, C302, C303, C304, C402 |
| 5 | 1ohm 1/4w | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R302, R307, R308, R309, R311 |
| 4 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R402, R406, R407, R502 |
| 4 | BC857 | Package_TO_SOT_SMD:SOT-23 | Q401, Q402, Q403, Q501 |
| 4 | G5LE-1 | Relay_THT:Relay_SPDT_Omron-G5LE-1 | K401, K402, K403, K501 |
| 3 | 330K 1/4w (carbón) | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R303, R304, R305 |
| 3 | 22K 1/4w (carbón) | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R504, R505, R506 |
| 3 | LM2904 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U301, U302, U401 |
| 2 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R409, R411 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R408, R410 |
| 2 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Horizontal | J202, J502 |
| 2 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Horizontal | J203, J501 |
| 2 | RA | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R313, R413 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C401 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R503 |
| 1 | 150k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R316 |
| 1 | 1N4148 | Diode_SMD:D_MiniMELF | D503 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R314 |
| 1 | 2.2uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C501 |
| 1 | 220 1/4w | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R310 |
| 1 | 220K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R301 |
| 1 | 22K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R306 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R315 |
| 1 | 270 2w | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal | R507 |
| 1 | 470nF x 400v | Capacitor_THT:C_Rect_L16.5mm_W8.7mm_P15.00mm_MKT | C502 |
| 1 | Conn_01x06_Male | Conectores:TerminalBlock_bornier-6_P5.00mm | J503 |
| 1 | Conn_01x11_Female | Conectores:TerminalBlock_bornier-11_P5.00mm | J201 |
| 1 | D_Zener 12v | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D301 |
| 1 | PC817 | Package_DIP:DIP-4_W7.62mm | U501 |
The 79 most common of 85 parts.
More from Gonzalogontad/ProyectoFinalCESEGG
1- 2 layers100 × 70 mm

Similar boards
- 2 layers63.5 × 63.5 mm

Main pcb
peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project
45 parts210GPL-3.0 - 4 layers100 × 100 mm

DAC ADC PWM IO
DanielMartensson/STM32-PLC
STM32 microcontroller with lots of periferials such as ADC, differential ADC, Input Capture, PWM, USB, Encoder, DAC, Digital Input, RTC, CAN-bus + Alarm etc.
270 parts183MIT - 2 layers133 × 98 mm

Precharge
michaelruppe/FSAE
Projects for Formula SAE Electric Vehicle competition (Australia 2019/2020)
121 parts59MIT - 4 layers129.5 × 52.3 mm

- 4 layers100 × 100 mm

Pi TX 35W PA V2
M0LTE/pi-transceiver
An attempt to build a complete ham radio transceiver around a Raspberry Pi
185 parts15 - 2 layers65 × 56 mm

2017 VNA
frohro/WWU-VNA
An Inexpensive Vector Network Analyzer Project for the Walla Walla University Electronics II Class
64 parts12MIT - 4 layers252 × 152 mm

CTA control board
PySpice-org/eda-rw
Python library to read/write KiCad and LibrePCB Sexpr file format
619 parts9 - 2 layers100 × 100 mm

Questions
How big is the Mod Temp Driver PCB?
It measures 70 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mod Temp Driver use?
85 parts, built around the LM2904 and BC857. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mod Temp Driver KiCad files?
From the Gonzalogontad/ProyectoFinalCESEGG repository on GitHub, at the commit this page was made from: the board is Hard/ModAdicionales/Mod_Temp_Driver/Mod_Temp_Driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mod Temp Driver design in my own project?
Its repository states no licence, so its author keeps all rights: ask Gonzalogontad before reusing the design.