
REF1329 Altera
RWeick/REF1329-N64-Gameshark-Clone
This implements the original LZ9FC17 GAL on an Altera EPM240. It fully supports all functionality to include: parallel port, 7 segment display, and the GS button

Proyecto destinado a la creacion de Shields de Arduino con displays de 7 segmentos bajo distintos metodos. Proyecto CIII
AnodoComun is an open-source printed circuit board by gonza371, from the gonza371/arduino repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 34 parts on 44 nets.
It is built around the HDSP-7501 and BC558. Its parts include 14 resistors, 4 connectors, 3 ICs, 3 transistors and 3 switches.
Proyecto destinado a la creacion de Shields de Arduino con displays de 7 segmentos bajo distintos metodos. Proyecto CIII
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14 |
| 4 | MountingHole_3.2mm | Arduino_MountingHole:MountingHole_3.2mm | MH1, MH2, MH3, MH4 |
| 3 | BC558 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q4 |
| 3 | HDSP-7501 | 7SegmentAC:D1X8K_AC | U1, U2, U3 |
| 3 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1, SW2, SW3 |
| 2 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1, JP2 |
| 1 | Analog | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | Power | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Horizontal | RV1 |

RWeick/REF1329-N64-Gameshark-Clone
This implements the original LZ9FC17 GAL on an Altera EPM240. It fully supports all functionality to include: parallel port, 7 segment display, and the GS button

RWeick/REF1220-N64-Gameshark-Pro
The full schematic, optimized PCB, and rom dump.

adrianwojcikpp/Microprocessor-system-examples-2022-23
Examples of digital circuits and CLI applications based on Microprocessor systems laboratory classes on Automatic Control and Robotics at the Poznań University of Technology.


PhamVanDe05/IOT_Clicker
Hệ thống trả lời trắc nghiệm trong lớp: sinh viên bấm đáp án trên tag cầm tay, giáo viên xem kết quả cả lớp ngay trên web.


INSA-GEI/insa-nxpcup
Dépôt du département GEI de l'INSA Toulouse pour la compétition NXPCup

It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the HDSP-7501 and BC558. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gonza371/arduino repository on GitHub, at the commit this page was made from: the board is Shields-8.0/AnodoComun/AnodoComun/AnodoComun.kicad_pcb and its schematic Shields-8.0/AnodoComun/AnodoComun/AnodoComun.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask gonza371 before reusing the design.