

Redesc ma
Some bits for robots or other control applications
- Size
- 19.9 × 11 mm
- Copper layers
- 2
- Thickness
- 0.89 mm
- Parts
- 13
- Nets
- 13
- Pads
- 50
- Tracks, vias
- 123, 18
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 18 Mar 2022
- Updated
- 25 Feb 2022
Overview
Redesc ma is an open-source printed circuit board by goktugh, from the goktugh/robotbits repository on GitHub. It is a 2-layer board of 19.9 × 11 mm with 13 parts on 13 nets, routed with 123 tracks and 18 vias.
It is built around the ATTINY4-MAH, BDR6122T and AIC1734-33GUTR, with the SM03B-SRSS-TB among its other parts. Its parts include 4 connectors, 3 capacitors, 3 ICs, 2 resistors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATTINY4-MAH
UDFN-8-EP(2x2)-40℃~+85℃ 1.8V~5.5V 12MHz 32Byte 4 512Byte 8 Bit AVR Built-in FLASH UDFN-8-EP(2x2) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)BDR6122T
SOP-8-40℃~+85℃ 1.8A 1.8V~5.5V 10nA 280mΩ 3.5A WDFN-8-EP(2x2) Brushed DC Motor Drivers ROHSBardeen Micro.Brushed DC Motor DriversAIC1734-33GUTR
SOT-23-40℃~+85℃@(Ta) 1 12V 3.3V 300mA 470mV@(300mA) 55uA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSM03B-SRSS-TB
Header SR 1.0 SMT side entry, 1mm pitchJSTUncategorised
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | Conn_01x01_Male | motorback:motorpad | J2, J3 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | AIC1734-33GUTR | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | ATtiny4-MA | Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.9x1.5mm | U2 |
| 1 | BDR6122T | motorback:drv8837_custom | U1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | Servo wire input | Connector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J1 |
| 1 | prog_pins | motorback:pogopins_5 | J4 |
More from goktugh/robotbits
12- 2 layers124 × 67 mm

- 2 layers124 × 67 mm

- 4 layers83.5 × 61 mm

- 4 layers82 × 56.5 mm

- 4 layers82 × 61 mm

- 2 layers110 × 48 mm

- 4 layers32 × 58 mm

- 2 layers52 × 52 mm

- 2 layers77 × 39 mm

- 2 layers41 × 39 mm

- 4 layers19 × 32 mm

- 2 layers43.5 × 15 mm

Similar boards
- 2 layers19 × 24.1 mm

- 2 layers19 × 24.1 mm

Malenki nanox
MarkR42/malenki-esc
A small electronic speed controller for e.g. tiny fighting robots or other rc models
25 parts7 - 2 layers291.8 × 134.6 mm

- 6 layers76 × 46.4 mm

Rp2350 driver
sequoia-hope/rp2350-motor-controller
An RP2350 based brushless motor controller
291 parts39 - 4 layers

- 4 layers62.8 × 61.7 mm

- 4 layers40 × 40 mm

Enc encoder
ROAR-QUTRC/perseus-v3
The code base for the QUT Robotics Club ROAR teams rover Perseus starting 2026
87 parts10 - 4 layers84 × 40 mm

Questions
How big is the Redesc ma PCB?
It measures 19.9 × 11 mm and has 2 copper layers, 0.89 mm thick.
What parts does the Redesc ma use?
13 parts, built around the ATTINY4-MAH, BDR6122T, AIC1734-33GUTR and SM03B-SRSS-TB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Redesc ma KiCad files?
From the goktugh/robotbits repository on GitHub, at the commit this page was made from: the board is n20_motorback/redesc_ma/redesc_ma.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Redesc ma design in my own project?
Its repository states no licence, so its author keeps all rights: ask goktugh before reusing the design.