Skip to the content
2 layers100 × 99.3 mmGamePad, the printed circuit board in 3D

PCB in kicad directory. Teensy software for joystick, mouse and media keyboard.

Size
100 × 99.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
144
Nets
98
Pads
350
Tracks, vias
807, 23
Pours
30
Routed
Yes
KiCad
KiCad 4
Created
4 Aug 2016
Updated
4 Aug 2016

Overview

GamePad is an open-source printed circuit board by GoInK13, from the GoInK13/gameboyonpi repository on GitHub. It is a 2-layer board of 100 × 99.3 mm with 144 parts on 98 nets, routed with 807 tracks and 23 vias.

It is built around the TL081. Its parts include 116 connectors, 3 ICs, 1 resistor, 1 diode and 1 switch. It belongs with the keyboards and input boards of this library.

Main components

1

README

README.md

gameboyonpi

PCB in kicad directory. Teensy software for joystick, mouse and media keyboard.

Parts

144
QtyValueFootprintReferences
27GNDGameBoy:header_1-2P1, P17, P25, P26, P27, P28, P29, P30, P31, P32, P39, P40, P41, P42, P111, P112 +11
13GameBoy:header_1-2, , , , , , , , , , , ,
6HOLE_LGameBoy:Hole_1mmP83, P83, P83, P83, P83, P84
43V3GameBoy:header_1-2P16, P21, P23, P51
45VGameBoy:header_1-2P52, P55, P56, P60
3H_SV2GameBoy:Hole_1mmP96, P96, P96
2EXITGameBoy:header_1-2P49, P79
2HKEYGameBoy:header_1-2P53, P80
2HOLE_RGameBoy:Hole_1mmP85, P86
2H_SV1GameBoy:Hole_1mmP95, P95
2H_XTGameBoy:Hole_1mmP93, P93
2LGameBoy:header_1-2P10, P81
2LOADGameBoy:header_1-2P33, P69
2MENUGameBoy:header_1-2P24, P78
2RGameBoy:header_1-2P54, P82
2TRBOGameBoy:header_1-2P35, P77
11kResistors_ThroughHole:Resistor_Horizontal_RM7mmR1
15V_INGameBoy:header_1-2P99
15V_OUTGameBoy:header_1-2P100
1AGameBoy:button_roundP22
1Ampli_AudioGameBoy:ampli_audioU2
1BGameBoy:button_roundP20
1BAT_LOWLEDs:LED-3MMD1
1BatteryGameBoy:charger_batBT1
1CONN_BTN_JACKPin_Headers:Pin_Header_Straight_1x04P50
1CONN_BTN_SOUNDPin_Headers:Pin_Header_Straight_1x02P70
1CONN_JACK_BTNPin_Headers:Pin_Header_Straight_1x04P48
1DownGameBoy:button_roundP6
1EXITGameBoy:button_roundP58
1GND_BATGameBoy:header_1-2P103
1GND_USBGameBoy:header_1-2P105
1HKEYGameBoy:button_roundP59
1H_HCK1GameBoy:Hole_1mmP97
1H_LD2GameBoy:Hole_1mmP88
1H_MN1GameBoy:Hole_1mmP91
1H_MN2GameBoy:Hole_1mmP92
1H_TRB1GameBoy:Hole_1mmP89
1H_TRB2GameBoy:Hole_1mmP90
1JACK_GB_5PINSGameBoy:JackJ1
1JOYSTICKGameBoy:PSP_JoystickP47
1LGameBoy:button_rectangleP11
1LED_GNDGameBoy:header_1-2P110
1LED_POWERGameBoy:header_1-2P109
1LED_SCREENGameBoy:header_1-2P71
1LOADGameBoy:button_roundP36
1LOGOGameBoy:GoInK600G***
1LOGOGameBoy:GoInK300G***
1LeftGameBoy:button_roundP4
1MENUGameBoy:button_roundP57
1OT0GameBoy:header_1-2P61
1OT1GameBoy:header_1-2P3
1OT2GameBoy:header_1-2P13
1PISocket_Strips:Socket_Strip_Straight_2x13P72
1PI_3V3GameBoy:header_1-2P106
1PI_5VGameBoy:header_1-2P107
1PI_GNDGameBoy:header_1-2P108
1POT_BAT_LOWDiscret:RV2X4RV1
1POT_LEDGameBoy:pot_screenRV2
1RGameBoy:button_rectangleP14
1RightGameBoy:button_roundP8
1SAVEGameBoy:header_1-2P76
1SAVZGameBoy:header_1-2P34
1SCREEENSocket_Strips:Socket_Strip_Straight_2x13P73
1SPEAKERPin_Headers:Pin_Header_Straight_1x02SP1
1SP_PI_BTNSocket_Strips:Socket_Strip_Straight_1x02P74
1SP_PI_JACKPin_Headers:Pin_Header_Straight_1x02P75
1SaveGameBoy:button_roundP37
1SelectGameBoy:button_rectangleP12
1StartGameBoy:button_rectangleP15
1Switch_GBGameBoy:Switch_GBSW1
1TL081Power_Integrations:PDIP-8U1
1TeensyGameBoy:TeensyU3
1TurboGameBoy:button_roundP38
1USBPin_Headers:Pin_Header_Straight_1x04P101
1USB_AConnect:USB_AP104
1UpGameBoy:button_roundP5
1V_BATGameBoy:header_1-2P2
1V_BAT_CHARGEGameBoy:header_1-2P102
1XGameBoy:button_roundP19
1YGameBoy:button_roundP18

The 141 most common of 144 parts.

Similar boards

  • 2 layersMP Tracker, the printed circuit board in 3D

    MP Tracker

    elektra42/freifunk-open-mppt

    Open hard- and software solar maximum power point tracker

    70 parts89
  • 2 layers50.8 × 25.4 mmFresh test project, the printed circuit board in 3D

    Fresh test project

    MitjaNemec/Archive3DModels

    This plugin copies footprint 3D models to the project local subfolder (default name: packages3D). The plugin also updates the links to the models within the layout (.kicadpcb) file so that they point to the archived 3D…

    9 parts20GPL-2.0
  • 2 layers96.3 × 93.6 mmESP OpenMppt, the printed circuit board in 3D

    ESP OpenMppt

    ISEMS/ISEMS-ESP32

    ISEMS-Port for Solarnodes based on ESP32 Microcontrollers

    75 parts11
  • 2 layers190.5 × 77 mmGreengateDS3, the printed circuit board in 3D

    GreengateDS3

    schlae/goodgreat-ds3

    Clone of the Greengate DS3 sampler

    74 parts10
  • 2 layers72.9 × 38.7 mmRed pitaya pwm shield, the printed circuit board in 3D

    Red pitaya pwm shield

    atomlaser-lab/iq-bias-control

    Digital bias controller for IQ single-sideband modulation using a Red Pitaya STEMlab board

    54 parts7
  • 2 layers47 × 81.5 mmExploere202, the printed circuit board in 3D

    Exploere202

    ambraglow/VLF-receiver

    ExplorerE202-based design

    60 parts3CERN-OHL-P-2.0
  • 6 layers90 × 45 mmHw tele stern, the printed circuit board in 3D

    Hw tele stern

    shorlee/TeleSTERN

    The TeleSTERN Project is an Open Source Rocketry Flight Computer based on the TeleMega by Altus Metrum.

    303 parts3GPL-3.0

Questions

How big is the GamePad PCB?

It measures 100 × 99.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the GamePad use?

144 parts, built around the TL081. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the GamePad KiCad files?

From the GoInK13/gameboyonpi repository on GitHub, at the commit this page was made from: the board is KiCad/GamePad.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the GamePad design in my own project?

Its repository states no licence, so its author keeps all rights: ask GoInK13 before reusing the design.