4 layers65 × 42 mm
Receiver
andrew153d/RemoteWelderController
A pair of devices meant to retrofit older welders with wireless connectivity. This document covers the usage and mechanical makeup, the cost overview can be found here.
131 parts1
2 layers42 × 26 mm
Trinteract
gocivici/trinteract28An open-source Arduino-compatible 3DOF Human Interface Device (HID)
- Size
- 42 × 26 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 23
- Pads
- 70
- Tracks, vias
- 91, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Apr 2023
- Updated
- 26 Jun 2023
Overview
Trinteract is an open-source printed circuit board by gocivici, from the gocivici/trinteract repository on GitHub, published under the MIT licence. It is a 2-layer board of 42 × 26 mm with 16 parts on 23 nets, routed with 91 tracks and 4 vias.
It is built around the TLV493DA1B6HTSA2. Its parts include 4 resistors, 3 connectors, 2 ICs, 1 capacitor and 1 diode. It belongs with the interfaces and adapters and microcontroller boards boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdTrinteract
This repository contains all the files and documentation for Trinteract, An open-source Arduino-compatible 3DOF Human Interface Device (HID). In other words a joystick that's capable of moving in all 3 Dimensions. Trinteract uses a 3D magnetometer and a Neodymium magnet to detect motion in 3D space. Visit the DIY guide
File structure:
Softwarecontains the arduino code and necessary driversPCBcontains the KiCAD PCB files and gerber files for manufacturingdocscontains the source code for the documentation website build with SphinxCADcontains all fusion360 CAD files and print ready .stl files
| Before Assembly | Assembled |
|---|---|
 |  |
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 3mm | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3 |
| 2 | 2k2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 680R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | Conn_01x04_MountingPin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J3 |
| 1 | Conn_01x05_MountingPin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J2 |
| 1 | Conn_01x12_MountingPin | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Horizontal | J1 |
| 1 | LED | GreenV5:156120GS82500 | D1 |
| 1 | LOGO | LOGO | G*** |
| 1 | ProMicro | footprints:ARDUINO_PRO_MICRO | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | TLV493DA1B6HTSA2 | foootprints:TLV493DA1B6HTSA2 | U1 |
Questions
How big is the Trinteract PCB?
It measures 42 × 26 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Trinteract use?
16 parts, built around the TLV493DA1B6HTSA2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Trinteract KiCad files?
From the gocivici/trinteract repository on GitHub, at the commit this page was made from: the board is PCB/v1.2/trinteract.kicad_pcb and its schematic PCB/v1.2/trinteract.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Trinteract design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers
RTLS VIC
BiggiePete/RTLS_VIC
Return to launch senior design kicad hardware repo for Vehicle In-flight Controller
58 partsGPL-3.0 - 2 layers140.5 × 30 mm
Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
16 parts3kApache-2.0 - 2 layers41.4 × 14.5 mm
U2f zero
conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style
16 parts2.4k - 2 layers77.5 × 33.7 mm
Breakout 72pin 1123038-2-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
16 parts1.2k - 2 layers122 × 37 mm
V0-UmbilicalBoard
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
16 parts1.1kGPL-3.0 - 2 layers152 × 57.6 mm
Videoslotadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
16 parts1kGPL-3.0 - 2 layers36 × 63.4 mm
Smart ringfinal layout
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
16 parts915