
Neuromime 1.0.1
gnimm/neuromime
The “neuromime” is an electronic model of an organic nerve cell that can be interconnected in chains and loops.

The “neuromime” is an electronic model of an organic nerve cell that can be interconnected in chains and loops.
Neuromime 1.0.1 minor corr is an open-source printed circuit board by gnimm, from the gnimm/neuromime repository on GitHub. It is a 2-layer board with 55 parts on 29 nets, routed with 378 tracks and 0 vias.
It is built around the LM311. Its parts include 15 capacitors, 15 resistors, 7 diodes, 5 connectors and 5 switches.
The “neuromime” is an electronic model of an organic nerve cell that can be interconnected in chains and loops. It is released here as an open-source hardware project in a collaborative effort by artists Norman White (original concept and design) and Peter Flemming (revision, expansion). Neuromimes are intended for (but not limited to) use in the creation of electro-physical artworks. Neuromimes can also function as the modular core of laboratory-style workshops where participants collectively generate an artwork for exhibition. Neuromimes are extensible building blocks, ideally suited to a collective making setting and/or generative, interactive artworks. Reminiscent of an exquisite corpse, they provide a framework that, while structured, is not scripted.
LINKS
Norman White speaking on the Neuromime at Interaccess (8'00"): https://www.youtube.com/watch?v=ue9ZF_hO-PE
Norman White on wikipedia: http://en.wikipedia.org/wiki/Norman_White
Norman White's website with other projects: http://normill.ca/
Peter Flemming's website with other projects: http://peterflemming.net
PROPERTIES OF AN ORGANIC NEURON
All-or-Nothing – It either fires completely or not at all (in this way it is "digital").
Temporal Summation – It can be made to fire by triggering one dendrite receptor repeatedly over time.
Spatial Summation – It can be made to fire by triggering several of its dendrite receptors simultaneously or virtually so.
Latency – It takes awhile for the impulse to travel from the dendrite receptor(s) along the axon to the output points (terminals).
Refractory Period – Once fired, it rests awhile before it can respond to stimuli again.
TECHNICAL
-these folders contains files for a printed circuit board generated with KiCad, build: (2012-apr-16-27), http://www.kicad-pcb.org
-important technical annotation is contained in Norman's original schematic in the "ref" folder
-supplementary files (other schematics, visual information) are in the folder "ref"
-see the index below for detailed description of folder contents and files
INDEX (most folders have a detailed index as well)
1.0.0/
---this folder contains the Neuromime board files, schematics, fabrication outputs (Gerber etc.) done in KiCad
kicadlibs/
---folder contains footprint and schematic device libraries used in Neuromime not included in standard KiCad
ref/
---folder for supplementary files (Norman's original schematic, other visual information etc.)
LICENSE.txt
---Creative Commons license
README.md
---this file
TODO.txt
---errors, to do, future versions, suggestions, comments
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C7, C9, C10, C11, C12, C13, C15, C16 |
| 5 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R8, R10, R11, R12, R13 |
| 5 | 1N4148 | Diode_THT:D_DO-35_SOD27_P2.54mm_Vertical_KathodeUp | D1, D2, D3, D4, D5 |
| 3 | Zxct | flemming_feetprint_2019:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical_pad_numbers_reversed | R1, R2, R3 |
| 3 | axon | flemming_feetprint_2019:PinHeader_1x03_P2.54mm_Horizontal_elomgated_pads | P2, P3, P4 |
| 3 | excite | flemming_feetprint_2019:PinSocket_1x03_P2.54mm_Horizontal_elongated | K2, K3, K4 |
| 1 | 10uF | flemming_feetprint_2019:CP_Radial_D5.0mm_P2.50mm_positive_symbol_inside | C1 |
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P5.08mm_Vertical_KathodeUp | D7 |
| 1 | 1uF | flemming_feetprint_2019:CP_Radial_D5.0mm_P2.50mm_positive_symbol_inside | C6 |
| 1 | 27K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R7 |
| 1 | 555late | Package_DIP:DIP-8_W7.62mm_Socket | U2 |
| 1 | 555pout | Package_DIP:DIP-8_W7.62mm_Socket | U3 |
| 1 | 555rest | Package_DIP:DIP-8_W7.62mm_Socket | U4 |
| 1 | BIASinh | flemming_feetprint_2019:Potentiometer_Bourns_3266W_Vertical_pin_variation | RV1 |
| 1 | BIASxct | flemming_feetprint_2019:Potentiometer_Bourns_3266W_Vertical_pin_variation | RV2 |
| 1 | Clate | flemming_feetprint_2019:CP_Radial_D5.0mm_P2.50mm_positive_symbol_inside | C8 |
| 1 | Cpk_exct | flemming_feetprint_2019:CP_Radial_D5.0mm_P2.50mm_positive_symbol_inside | C5 |
| 1 | Cpk_inh | flemming_feetprint_2019:CP_Radial_D5.0mm_P2.50mm_positive_symbol_inside | C4 |
| 1 | Cpout | flemming_feetprint_2019:CP_Radial_D5.0mm_P2.50mm_positive_symbol_inside_single_correction | C14 |
| 1 | Crest | flemming_feetprint_2019:CP_Radial_D5.0mm_P2.50mm_positive_symbol_inside | C17 |
| 1 | ENrest | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | W3 |
| 1 | LED | LED_THT:LED_D3.0mm | D6 |
| 1 | LM311 | Package_DIP:DIP-8_W7.62mm_Socket | U1 |
| 1 | Rbld_inh | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R5 |
| 1 | Rbld_xct | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R6 |
| 1 | Rlate | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R9 |
| 1 | Rled | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R15 |
| 1 | Rpout | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R14 |
| 1 | SW_Push_Dual | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | VARrest | flemming_feetprint_2019:Potentiometer_Bourns_3266W_Vertical_pin_variation | RV3 |
| 1 | Zinh | flemming_feetprint_2019:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical_pad_numbers_reversed | R4 |
| 1 | inhibit | flemming_feetprint_2019:PinSocket_1x03_P2.54mm_Horizontal_elongated | K1 |
| 1 | long | flemming_feetprint_2016:PinHeader_1x03_P2.54mm_Horizontal_elomgated_pads | P5 |
| 1 | mnt | MountingHole:MountingHole_4.5mm | P1 |

gnimm/neuromime
The “neuromime” is an electronic model of an organic nerve cell that can be interconnected in chains and loops.




artemisamsx/artemisa
Schematics, PCB designs and HDL simulations to build a 8-bits MSX computer

andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers

yvodehaas/HP45-standalone-controller-V4.02
HP45 standalone controller V4.02


laurent-fr/junior_computer_replica
A replica of the Junior Computer (a KIM-1 clone) published by Elektor in the 80's
55 parts, built around the LM311. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gnimm/neuromime repository on GitHub, at the commit this page was made from: the board is 1.0.1_minor_corrections_post_MUTEK/project_files/neuromime_1.0.1_minor_corr.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask gnimm before reusing the design.