
Mother
emiirkaya/ThermovitalSync-PCB
A PCB project for a vital monitoring-cooling device with GUI

Botoni hw is an open-source printed circuit board by gmazzucchi, from the gmazzucchi/botoni-hw repository on GitHub. It is a 2-layer board of 300 × 120 mm with 113 parts on 111 nets, routed with 740 tracks and 103 vias.
It is built around the TDA2050V and LM1117MP-3.3. Its parts include 50 resistors, 18 switches, 15 connectors, 13 capacitors and 8 diodes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 4.7k | Resistor_SMD:R_0603_1608Metric | R13, R14, R15, R16, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32 +12 |
| 10 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R6, R9, R10, R11, R12, R17, R18, R19, R20 |
| 8 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | SW_Push | Pedaliera:Aliexpress push button | SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18 |
| 8 | SW_SPST | Pedaliera:KN3C-101 | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric | R2, R3, R7, R8 |
| 4 | 22k | Resistor_SMD:R_0603_1608Metric | R35, R36, R39, R40 |
| 4 | Conn_01x04 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J16, J17, J18, J19 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 2 | 0.47u | Capacitor_SMD:C_0603_1608Metric | C7, C8 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C15, C16 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 2.2 | Resistor_SMD:R_0603_1608Metric | R37, R38 |
| 2 | 220u | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 2 | 680 | Resistor_SMD:R_0603_1608Metric | R41, R42 |
| 2 | Conn_01x10 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J3, J8 |
| 2 | Conn_01x20 | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J4, J5 |
| 2 | Conn_02x10_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J1, J14 |
| 2 | SW_SPDT | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | SW9, SW10 |
| 2 | Speaker | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | LS1, LS2 |
| 2 | TDA2050 | Package_TO_SOT_THT:TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_Vertical | U1, U2 |
| 1 | 220u | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C11 |
| 1 | Conn_01x02 | Pedaliera:Aliexpress push button | J11 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J12 |
| 1 | Conn_01x09 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J13 |
| 1 | Display | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J9 |
| 1 | LM1117MP-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | UART | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J10 |

emiirkaya/ThermovitalSync-PCB
A PCB project for a vital monitoring-cooling device with GUI



QuantumVillage/UncutGem
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer

NYDEREK/LineFollower_GRUZIK2.0-light
GRUZIK2.0 is simple light construction made for "line follower light" competition

BG6LH/FT-81x-BT-DIGI-Adaptor
A PCB Design of Bluetooth DIGI Adaptor for Yaesu FT-817/818 Series Transceivers

shufps/vfd-night-projector-clock
The VFD Night Projector Clock is the first and only (at the moment and to my knowledge 😁) night projecting clock that uses a VFD display.

It measures 300 × 120 mm and has 2 copper layers, 1.6 mm thick.
113 parts, built around the TDA2050V and LM1117MP-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gmazzucchi/botoni-hw repository on GitHub, at the commit this page was made from: the board is botoni-hw.kicad_pcb and its schematic audio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask gmazzucchi before reusing the design.