
BenchyFrontPanel
Daxxn/BenchyReloaded
New and improved Benchy, now with more doodads!

Simple OLED board
Panel is an open-source printed circuit board by GMagician, from the GMagician/Oled-Board repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 65.3 × 64.1 mm with 33 parts on 31 nets, routed with 348 tracks and 26 vias.
It is built around the ATTINY4313-PU, 1N4148WS and B3W-9000-RG2N, with the PKMCS0909E4000-R1 among its other parts. Its parts include 11 capacitors, 7 resistors, 7 connectors, 4 switches and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
[!WARNING] The transfer of all repositories to my Codeberg account is currently ongoing. In the future, this project will be continued here!
This board has been inspired by Leonerd it's an open source and open hardware. On the hardware side is fully compatible (not tested with 5V input tolerant boards) On software side there are some new features usefull for SMuFF device
PLEASE NOTE REV1 HAS PCB ERRORS. TO PROPERLY WORK NEED SOME PCB, PINS, PADS AND ROUTES CUTTING. THESE SHOULD BE FIXED IN REV2 BRANCH
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C102, C103, C104, C205 |
| 4 | 1µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C201, C202, C203, C204 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R201, R202, R203 |
| 2 | 10mm | Button_Switch_SMD:SW_SPST_Omron_B3FS-100xP | SW102, SW103 |
| 2 | 10µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C101, C207 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J201, J202 |
| 2 | Conn_01x02 | OledSupport-header:OledSupport-header | J101, J104 |
| 1 | 180 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R103 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R101 |
| 1 | 1N4148WS | Diode_SMD:D_SOD-323 | D201 |
| 1 | 2.2µF/16V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C206 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R102 |
| 1 | 910K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R204 |
| 1 | ATtiny4313 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U102 |
| 1 | B3W-9000-RG2N | B3W-9000-RG2:B3W-9000-RG2 | SW104 |
| 1 | Header | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J103 |
| 1 | Header | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J102 |
| 1 | PKMCS0909E4000-R1 | Buzzer_Beeper:Buzzer_Murata_PKMCS0909E4000-R1 | BZ101 |
| 1 | Rotary Encoder + Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW101 |
| 1 | SSD1306 | Display:OLED-128O064D | J203 |
| 1 | XC6206P | Package_TO_SOT_SMD:SOT-23 | U101 |

Daxxn/BenchyReloaded
New and improved Benchy, now with more doodads!

vinthewrench/valvenode
Wired RS-485 field-bus irrigation valve controller for Raspberry Pi farm automation

axpaul/KinetiCoreDC
Compact STM32G0-based DC motor controller board featuring TI DRV8874 H-bridge drivers, RS485 communication, optoisolated I/O, and hardware power protection.

olerast67/emotion-keychain
Брелок с OLED-экраном и анимированными эмоциями




camhan22/Motor-Controller
12-48VDC 65A Continuous 150A Peak brushed DC motor driver
It measures 65.3 × 64.1 mm and has 2 copper layers, 1.6 mm thick.
33 parts, built around the ATTINY4313-PU, 1N4148WS, B3W-9000-RG2N and PKMCS0909E4000-R1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GMagician/Oled-Board repository on GitHub, at the commit this page was made from: the board is hardware/Panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).