4 layers68.6 × 53.3 mm
10 layers177.8 × 141 mm
Proc101d
gingerologist/am64xThis project starts from proc101d (TMDS64EVM).
- Size
- 177.8 × 141 mm
- Copper layers
- 10
- Thickness
- 1.6 mm
- Parts
- 798
- Nets
- 783
- Pads
- 2,920
- Tracks, vias
- 13,399, 1,636
- Pours
- 101
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 25 Jul 2024
- Updated
- 5 Aug 2024
Overview
Proc101d is an open-source printed circuit board by gingerologist, from the gingerologist/am64x repository on GitHub. It is a 10-layer board of 177.8 × 141 mm with 798 parts on 783 nets, routed with 13,399 tracks and 1,636 vias.
It is built around the TCAN1042HGVD, TMP100NA/3K and TPS62826DMQ, with the SN74LVC1G08DBVRE4, SN74LVC1G11DCKR(AT) and BSS138LT1G among its other parts. Its parts include 338 resistors, 268 capacitors, 16 ICs, 6 transistors and 6 connectors.
Main components
9
TCAN1042HGVD
SOIC-8-40℃~+125℃ 12uA 4.5V~5.5V 5Mbps 80mA CAN FD Transceiver Low-power mode、Wake-up function、TXD dominant timeout、ESD Protection、Undervoltage Protection、Thermal shutdown protection、Bus Fault Protection、Integrated level shifting SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
TMP100NA/3K
SOT-23-6-55℃~+125℃ 100nA 12bit 2.7V~5.5V 320ms I2C、SMBus ±2℃ SOT-23-6 Temperature Sensors ROHSTexas InstrumentsTemperature SensorsTPS62826DMQ
UncategorisedTexas Instruments
SN74LVC1G08DBVRE4
SOT-23-5-40℃~+125℃ 1 1.65V~5.5V 10uA 2 32mA 32mA 4ns@5V,50pF 74LVC Series AND Gate Overvoltage-tolerant input、Rear drive protection、Local shutdown mode、Live insertion protection SOT-23-5 Logic Gates ROHSTexas InstrumentsLogic Gates
SN74LVC1G11DCKR(AT)
SC-70-6-40℃~+125℃ 1 1.2V、1.9V、2.3V、2.4V、3.8V 1.65V~5.5V 1.7V、2V 3 3.7ns@5V,50pF 300mV、400mV、450mV、550mV 700mV、800mV 74LVC AND Gate SC-70-6 Logic Gates ROHSAOTELogic Gates
BSS138LT1G
SOT-23-55℃~+150℃ 1 N-channel 200mA 225mW 5.6Ω@2.75V 500mV 50V 50pF 5pF SOT-23 MOSFETs ROHSonsemiMOSFETs
150080VS75000
0805-40℃~+85℃ 12mcd 140° 2.4V 20mA 570nm 572nm Discrete Diode Water Clear 0805 LED Indication - Discrete ROHSWürth ElektronikLED Indication - Discrete
SKHMQLE010
SMD-4P,6.5x6.2mm-30℃~+85℃ 1.6N 12V 3.1mm 300,000 Cycles 50mA 6.2mm 6.5mm Round Button SPST-NO Surface Mount,Vertical SMD-4P,6.5x6.2mm Tactile Switches ROHSALPSALPINETactile Switches
TPD1E10B06DPYR
X1-SON-2(0.6x1)-40℃~+125℃ 1 100nA 12pF 14V 5.5V 6A@8/20us 6V 90W@8/20us Bidirectional ESD IEC 61000-4-2 X1-SON-2(0.6x1) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)
README
README.mdAM64x Dev Board
This project starts from proc101d (TMDS64EVM).
There are two official dev boards for AM64x.
TMDS64EVM (codenamed proc101 and d is the latest version) has discrete power supplies, DDR4 memory, 3 gigabit ethernet, pcie support, high speed signal interface and advance debugging support.
AM64x Starter Kit has TPS65220 pmic, LPDDR4 memory, 2 gigabit ethernet sockets, USB3 support.
This is not an unopinionated design, though many features are going to be preserved in main branch. The project is mostly targeted battery powered, wireless and headless devices, which means, ethernets, display or camera supports are generally not required. But this is not for sure. Possibly some clients require those features.
TODO
- what does test automation test? and how
Simplified Power
- All current monitors are removed.
- LM5140 removed.
- VCC_5V0 removed.
- VCC_3V3_SYS is provided by a TPS62826.
- VCC3V3_PREREG reserved. The regulator is changed to TPS62826.
- Soc_DVDD3V3 merged into VCC_3V3_SYS.
- SoC_DVDD1V8 merged into VCC1V8.
- Fixed 0.85V core voltage, which means R1/R3 installed and R2/R4 not populated. Further, R1/R3 are removed, VDD_CORE, VDDR_CORE, as well as VDDA_CORE are merged into VDD_CORE.
| Net Name | - | Zone/Plane |
|---|---|---|
| VCC3V3_PREREG | PWR1 zone | |
| VCC_3V3_SYS | PWR1 plane, PWR2 zone | |
| VCC1V8 | PWR2 zone | |
| VDDA_1V8 | PWR2 zone | |
| - VDDA_1V8_MCU | ||
| VDD_CORE | PWR1 zone |
Parts
798| Qty | Value | Footprint | References |
|---|---|---|---|
| 86 | 10K | RES0402_0-5 | R16, R17, R124, R125, R132, R133, R151, R153, R155, R156, R167, R168, R169, R172, R173, R176 +70 |
| 55 | 100n,10%,10V | Abacus:C_0201_0603Metric_0.64x0.32mm_Courtyard | C302, C303, C304, C307, C309, C310, C311, C312, C314, C315, C317, C318, C319, C321, C323, C325 +39 |
| 53 | 0.1uF | CAP0402_0-75 | C22, C23, C24, C139, C150, C151, C170, C173, C179, C199, C207, C213, C220, C226, C235, C252 +37 |
| 50 | 0E | RES0402_0-5 | R137, R138, R139, R140, R158, R171, R217, R220, R221, R222, R223, R230, R246, R250, R252, R254 +34 |
| 43 | TP20_SMD | TP20_SMD | TP1, TP11, TP15, TP16, TP20, TP21, TP22, TP25, TP27, TP32, TP33, TP39, TP45, TP46, TP53, TP101 +27 |
| 39 | 1K_1% | RES0402_0-5 | R154, R262, R325, R326, R327, R328, R329, R330, R331, R332, R372, R373, R374, R375, R376, R377 +23 |
| 27 | 39.2E_1% | RES0402_0-5 | R46, R256, R258, R261, R264, R267, R269, R271, R273, R274, R275, R287, R288, R289, R290, R291 +11 |
| 20 | 1uF | CAP0402_0-75 | C52, C148, C225, C237, C238, C249, C253, C259, C261, C265, C266, C274, C280, C286, C366, C428 +4 |
| 19 | 100K | RES0402_0-5 | R29, R219, R314, R473, R474, R488, R489, R497, R498, R502, R503, R509, R510, R513, R514, R518 +3 |
| 15 | 22u,20%,25V | Capacitor_SMD:C_0805_2012Metric | C13, C14, C15, C17, C18, C19, C31, C32, C33, C46, C48, C49, C77, C78, C486 |
| 13 | 2.49K_1% | RES0402_0-5 | R31, R32, R33, R34, R35, R36, R41, R51, R52, R54, R56, R249, R251 |
| 13 | CAP_CAP0201_0-5_0.01UF | CAP0201_0-5 | C222, C223, C224, C229, C232, C233, C236, C239, C241, C242, C248, C250, C268 |
| 13 | CAP_CAP0402_0-75_1UF | CAP0402_0-75 | C58, C59, C60, C61, C62, C63, C64, C244, C246, C251, C254, C264, C267 |
| 13 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12, H13 |
| 12 | 4.7K | RES0402_0-5 | R265, R270, R303, R306, R309, R311, R322, R353, R354, R357, R358, R606 |
| 12 | CAP_CAP0402_0-75_0.01UF | CAP0402_0-75 | C27, C53, C57, C113, C200, C202, C219, C245, C432, C436, C444, C450 |
| 10 | 10pF | CAP0402_0-75 | C247, C255, C256, C257, C262, C487, C488, C491, C492, C493 |
| 10 | 49.9K_1% | RES0402_0-5 | R159, R160, R161, R162, R163, R164, R165, R166, R456, R457 |
| 9 | 10uF | CAP0402_0-75 | C9, C25, C141, C208, C210, C258, C263, C281, C288 |
| 9 | 220E | RES0402_0-5 | R37, R76, R197, R210, R212, R234, R276, R362, R407 |
| 9 | THRU HOLE | TP_40X65 | TP4, TP6, TP14, TP29, TP47, TP48, TP51, TP52, TP56 |
| 8 | 1u,20%,6.3V | Abacus:C_0201_0603Metric_0.64x0.32mm_Courtyard | C289, C294, C298, C348, C357, C390, C391, C396 |
| 8 | 4.7uF | CAP0402_0-75 | C87, C97, C119, C140, C149, C290, C364, C415 |
| 7 | 120E | IND0603_1 | FB1, FB2, FB9, FB11, FB12, FB25, FB26 |
| 7 | 49.9E_1% | RES0402_0-5 | R53, R59, R60, R61, R65, R333, R346 |
| 6 | 10K_1% | RES0402_0-5 | R70, R259, R283, R285, R405, R436 |
| 6 | 2.2uF | CAP0402_0-75 | C201, C228, C243, C430, C438, C451 |
| 6 | BSS138LT1G | SOT23-123_1-2 | Q3, Q11, Q12, Q13, Q18, Q19 |
| 5 | 100n | Abacus:NFM15 | C74, C103, C299, C327, C377 |
| 5 | 100p,5%,50V | Abacus:C_0603_1608Metric_1.28x0.64mm_Courtyard | C12, C16, C29, C96, C272 |
| 5 | 150080VS75000 | LED_150080VS75000_80X50_SMD_0-8 | LD1, LD4, LD9, LD15, LD26 |
| 5 | 2.2K | RES0402_0-5 | R19, R42, R66, R67, R79 |
| 5 | 22E_1% | RES0402_0-5 | R152, R239, R272, R302, R323 |
| 5 | 4.7u,10%,25V | Capacitor_SMD:C_0805_2012Metric | C11, C66, C95, C123, C211 |
| 5 | 470nH,15mOhm | Inductor_SMD:L_Sunlord_MWSA0518S | L1, L3, L4, L6, L8 |
| 5 | 5002 | TP_CIR67D40_TH_4-6 | TP3, TP5, TP26, TP31, TP34 |
| 5 | 620E_1% | RES0402_0-5 | R593, R594, R597, R598, R599 |
| 5 | Filter_EMI_C | Abacus:NFM15 | C88, C120, C341, C363, C398 |
| 5 | TPS62826 | Abacus:Texas_VSON-HR-6_1.5x1.5mm_P0.5mm | U2, U6, U17, U25, U30 |
| 4 | 100E | RES0402_0-5 | R50, R245, R255, R257 |
| 4 | 100k,1% | Abacus:R_0402_1005Metric_for_0.25mm_grid | R13, R123, R144, R145 |
| 4 | 4.7k,1% | Abacus:R_0402_1005Metric_for_0.25mm_grid | R150, R411, R460, R461 |
| 4 | 59E_1% | RES0402_0-5 | R2, R3, R4, R5 |
| 4 | HDR_1X3 | HDR_3X1_100_S_T | J31, J32, J34, J35 |
| 4 | SKHMQLE010 | SW4_SKHMQLE010_240X260_SMD_3-1 | SW4, SW5, SW6, SW7 |
| 4 | SN74LVC1G08DBVRE4 | SOT23-5 | U54, U69, U85, U88 |
| 4 | TPD1E10B06DPYR | DIO_DFN0402_0-5 | D8, D9, D10, D11 |
| 3 | 0.22uF | CAP0201_0-5 | C100, C102, C218 |
| 3 | 10n,50V | Abacus:C_0603_1608Metric_1.28x0.64mm_Courtyard | C21, C26, C118 |
| 3 | CAP_CAP0201_0-5_0.1UF | CAP0201_0-5 | C42, C227, C270 |
| 3 | SN74LVC1G11DCKR | SC70-6 | U35, U41, U86 |
| 2 | 0R,1% | Abacus:R_0402_1005Metric_for_0.25mm_grid | R22, R177 |
| 2 | 0R,1% | Abacus:R_0603_1608Metric_1.28x0.64mm_Courtyard | R583, R697 |
| 2 | 1.5K | RES0402_0-5 | R624, R625 |
| 2 | 1000pF | CAP1206_1-75 | C153, C287 |
| 2 | 100R,1% | Abacus:R_0603_1608Metric_1.28x0.64mm_Courtyard | R20, R580 |
| 2 | 100k,1% | Abacus:R_0603_1608Metric_1.28x0.64mm_Courtyard | R14, R43 |
| 2 | 100n,±10%,16V | Abacus:C_0402_1005Metric_for_0.25mm_grid | C144, C529 |
| 2 | 12pF | CAP0201_0-5 | C133, C134 |
| 2 | 15k,1% | Abacus:R_0603_1608Metric_1.28x0.64mm_Courtyard | R21, R294 |
| 2 | 1M | RES0603_0-75 | R170, R299 |
| 2 | 1u,±10%,25V | Abacus:C_0402_1005Metric_for_0.25mm_grid | C10, C126 |
| 2 | 200k,1% | Abacus:R_0603_1608Metric_1.28x0.64mm_Courtyard | R15, R28 |
| 2 | 21K_1% | RES0402_0-5 | R213, R260 |
| 2 | 22R,1% | Abacus:R_0402_1005Metric_for_0.25mm_grid | R409, R410 |
| 2 | 22u,±20%,6.3V | Abacus:C_0603_1608Metric_1.28x0.64mm_Courtyard | C334, C335 |
| 2 | 22uF | CAP0603_1 | C20, C28 |
| 2 | 4700pF | CAP0402_0-75 | C1, C2 |
| 2 | 47uF | CAP1206_2 | C448, C482 |
| 2 | 5.1k,1% | Abacus:R_0402_1005Metric_for_0.25mm_grid | R1, R10 |
| 2 | 68k,1% | Abacus:R_0603_1608Metric_1.28x0.64mm_Courtyard | R12, R279 |
| 2 | HDR_1X2 | HDR_1X2_68002-202_S_T_8-6 | J9, J10 |
| 2 | RESISTOR_RES0402_0-5_240E_1% | RES0402_0-5 | R38, R320 |
| 2 | SW8_218-8LPSTR_SW8_218-8LPST_45 | SW8_218-8LPST_450X230_SMD_2-7 | SW2, SW3 |
| 2 | TCAN1042HGVD | SOIC8_1-8 | U3, U4 |
| 2 | TMP100NA/3K | SOT23-6_1-5 | U18, U29 |
| 1 | 0.01uF | CAP0201_0-5 | C234 |
| 1 | 10.1K_0.1% | RES0603_0-75 | R214 |
| 1 | 100R,1% | Abacus:R_0402_1005Metric_for_0.25mm_grid | R685 |
| 1 | 10k,1% | Abacus:R_0603_1608Metric_1.28x0.64mm_Courtyard | R131 |
The 731 most common of 798 parts.
Questions
How big is the Proc101d PCB?
It measures 177.8 × 141 mm and has 10 copper layers, 1.6 mm thick.
What parts does the Proc101d use?
798 parts, built around the TCAN1042HGVD, TMP100NA/3K, TPS62826DMQ and SN74LVC1G08DBVRE4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Proc101d KiCad files?
From the gingerologist/am64x repository on GitHub, at the commit this page was made from: the board is proc101d.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Proc101d design in my own project?
Its repository states no licence, so its author keeps all rights: ask gingerologist before reusing the design.
Similar boards
- 2 layers68.6 × 53.3 mm
- 2 layers145 × 65 mm
- 4 layers163 × 117 mm
Teensy 4.1 + Jetson Nano powered from board
olexsu/inos-rev-a-robotics-controller
INOS Rev A — CAN-based robotic arm controller designed as a real-time motion-control node for NVIDIA Jetson robotics systems.
157 partsMIT - 2 layers80.8 × 80.8 mm
- 2 layers100 × 80 mm
Phase3-manager
udaravima/Lab_Bench
A modular, rack-style DC power supply: up to 8 hot-pluggable 600 W buck modules on a shared DC input bus, coordinated by a central manager over CAN.
87 parts1GPL-3.0 - 4 layers20 × 61.5 mm
Ble door sensor
gumulka/ble_door_sensor
A simple project to observe a window or door is open/closed. It works like most other sensors as well. A magnet has to get attached to the door and if it comes near the board, it is detected and the state of the window…
41 parts2Apache-2.0 - 4 layers100 × 52 mm
