
Honda hfl connector
gh2o/honda-stereo-stuff
Adapter PCBs for 9th gen Honda Civic steering wheel controls and OEM mic

Adapter PCBs for 9th gen Honda Civic steering wheel controls and OEM mic
Honda stereo adapter is an open-source printed circuit board by gh2o, from the gh2o/honda-stereo-stuff repository on GitHub. It is a 2-layer board of 50 × 50 mm with 10 parts on 38 nets, routed with 36 tracks and 0 vias.
It is built around the LTV-817. Its parts include 4 connectors, 2 resistors, 1 IC and 1 diode. It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x02 | honda-stereo-adapter:Keystone_7822_Blade_W6.35mm | J1, J4 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 5.1V | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | Conn_01x14 | honda-stereo-adapter:TE_917534_Honda | J3 |
| 1 | Conn_02x10_Top_Bottom | honda-stereo-adapter:JAE_MF34020NF1_Honda | J2 |
| 1 | LTV-817 | Package_DIP:DIP-4_W7.62mm | U1 |

gh2o/honda-stereo-stuff
Adapter PCBs for 9th gen Honda Civic steering wheel controls and OEM mic

MakerLabTunisia/CARVER_X5
CARVER X5 is an OpenSourceHarware 5 Axis CNC Carving Machine - by MakerLabTunisia

misteu/RPiCoffee
Modding / hacking of a coffee machine (DeLonghi ECAM 22.110.B Magnifica S) for IoT capabilities

rimuadmin/TeensyMaestro-Hardware
Hardware for the TeensyMaestro

devfabiosilva/TeslaSMPS
DIY: High Voltage Range Switching Mode Power Supply for Embedded and Solar systems

JeanRenier/Remoting-a-microBIT-X
A set of ESP32 based controllers to remote a µBIT-X transceiver over the internet

fablabnbg/aussentueren
Hard- and Software for external doors of Hackerspaces

rwobrecht/piTelex-contrib
Contributions (hardware, software) around piTelex

It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
10 parts, built around the LTV-817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gh2o/honda-stereo-stuff repository on GitHub, at the commit this page was made from: the board is honda-stereo-adapter/honda-stereo-adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask gh2o before reusing the design.