Skip to the content
PCBKitNew board
2 layersBlackpill board, the printed circuit board in 3D

Blackpill board

germandevelop/blackpill-node
Open in PCBKitView on GitHub.kicad_pcb
Copper layers
2
Thickness
1.6 mm
Parts
53
Nets
65
Pads
212
Tracks, vias
680, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
3 Feb 2024
Updated
5 Jun 2024

Overview

Blackpill board is an open-source printed circuit board by germandevelop, from the germandevelop/blackpill-node repository on GitHub. It is a 2-layer board with 53 parts on 65 nets, routed with 680 tracks and 0 vias.

It is built around the IRF3205. Its parts include 10 resistors, 4 transistors, 3 capacitors, 1 IC and 1 diode.

Main components

1

README

README.md

blackpill-node

Build firmware

Release

text
mkdir ./build
cd ./build
cmake ..
make silver

Debug

text
mkdir ./build
cd ./build
cmake -DCMAKE_BUILD_TYPE=Debug ..
make silver

Flash

Flash firmware

text
make flash

Erase firmware

text
make erase

Build tests

Build

text
mkdir ./build
cd ./build
cmake -DCMAKE_BUILD_TYPE=Debug -DBUILD_TESTS=ON ..
make tests

Run

text
make test

Parts

53
QtyValueFootprintReferences
9Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical3V3_0, 5V_0, 5V_1, 5V_2, EXP_GPIO_2, GPIO1, OSC_GPIO1, TX_PC1, UART1
5Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical3V3, 5V1, 5500_0, 5500_1, SPI_0
4100Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R5, R6
410kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3, R4, R7, R8
4Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalI2C_0, I2C_1, I2C_4, MAX_V1
4IRF3205Package_TO_SOT_THT:TO-220-3_VerticalQ1, Q2, Q3, Q4
3Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalEXP_GPIO_0, EXP_GPIO_1, USB1
3Conn_01x10Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalEXP_0, EXP_1, EXP_2
3MountingHoleMountingHole:MountingHole_2.5mm_PadH1, H3, H4
24k7Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR9, R10
2Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalADC1, JUMPER1
2Conn_01x20Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Verticalpill_0, pill_1
1
10.1uFCapacitor_THT:CP_Radial_Tantal_D4.5mm_P5.00mmC3
10.33uFCapacitor_THT:CP_Radial_Tantal_D4.5mm_P5.00mmC2
110uFCapacitor_THT:CP_Radial_Tantal_D4.5mm_P2.50mmC1
11N4004Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1
1Barrel_JackConnector_BarrelJack:BarrelJack_HorizontalJ1
1Conn_01x07Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalBasic1
1LM7805_TO220Package_TO_SOT_THT:TO-220-3_VerticalU1

Questions

What parts does the Blackpill board use?

53 parts, built around the IRF3205. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Blackpill board KiCad files?

From the germandevelop/blackpill-node repository on GitHub, at the commit this page was made from: the board is docs/scheme/blackpill_board/blackpill_board.kicad_pcb and its schematic docs/scheme/blackpill_board/blackpill_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Blackpill board design in my own project?

Its repository states no licence, so its author keeps all rights: ask germandevelop before reusing the design.

Similar boards

  • 2 layers77.7 × 73.2 mmBMT BionX Minimum Translator vereinfacht, the printed circuit board in 3D

    BMT BionX Minimum Translator vereinfacht

    stancecoke/BionX_Minimal_Translator

    Drive your BionX motor with a no-name battery and a Kunteng LCD-display without any further BionX-components

    40 parts22GPL-3.0
  • 2 layers50.2 × 73 mmLibreductioner, the printed circuit board in 3D

    Libreductioner

    andreasb242/Libreductioner

    Induction loop sender for mower

    39 parts8GPL-2.0
  • 2 layers98.8 × 55.1 mmH bridge controller, the printed circuit board in 3D

    H bridge controller

    jayanta525/dual-h-bridge

    Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller

    104 parts5MIT
  • 2 layers90 × 44 mmDC AC Inverter EGS, the printed circuit board in 3D

    DC AC Inverter EGS

    stefaweb/DC-AC-Inverter-EGS

    Mini DC-AC Inverter with EGS002 module

    42 parts5
  • 2 layers80 × 100 mmCustomPCB, the printed circuit board in 3D

    CustomPCB

    Cpp-homies/MAPLE

    M.A.P.L.E: Modular Automated Plant Life Enclosure

    23 parts4MIT
  • 4 layers104.1 × 132.6 mmAmpeater, the printed circuit board in 3D

    Ampeater

    Acliad/Ampeater

    10 A/us high current electronic load for power supply testing

    97 parts3MIT
  • 2 layers92.6 × 52 mmSineWaveInverter, the printed circuit board in 3D

    SineWaveInverter

    ampnics/Project-10

    Mater KiCad with Projects is a series of lectures in which we are learning PCB designing

    44 parts2