2 layers77.7 × 73.2 mm
BMT BionX Minimum Translator vereinfacht
stancecoke/BionX_Minimal_Translator
Drive your BionX motor with a no-name battery and a Kunteng LCD-display without any further BionX-components
40 parts22GPL-3.0
2 layers
Expansion board B01
germandevelop/beaglebone-node- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 116
- Pads
- 244
- Tracks, vias
- 520, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 3 Feb 2024
- Updated
- 4 Jun 2024
Overview
Expansion board B01 is an open-source printed circuit board by germandevelop, from the germandevelop/beaglebone-node repository on GitHub. It is a 2-layer board with 41 parts on 116 nets, routed with 520 tracks and 0 vias.
It is built around the IRF3205. Its parts include 7 connectors, 4 resistors and 2 transistors.
Main components
1README
README.mdbeaglebone-node
Build
Release
mkdir ./build
cd ./build
cmake ..
make allDebug
mkdir ./build
cd ./build
cmake -DCMAKE_BUILD_TYPE=Debug ..
make allBuild tests
Build
mkdir ./build
cd ./build
cmake -DCMAKE_BUILD_TYPE=Debug -DBUILD_TESTS=ON ..
make testsRun
make testParts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | 3V31, 5V1, ADC_1, GPIO_4, GPIO3, I2C2_1, MAX_V1, SPI1_1 |
| 5 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | ADC_PWR1, GPIO_3, GPIO51, JUMP_1, UART11 |
| 4 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | GPIO1, GPIO4, GPIO5, GPIO6 |
| 4 | Conn_01x23 | Connector_PinHeader_2.54mm:PinHeader_1x23_P2.54mm_Vertical | J2, J3, J6, J7 |
| 4 | MountingHole | MountingHole:MountingHole_2.5mm_Pad | H1, H2, H3, H4 |
| 2 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | GPIO_1, GPIO_2 |
| 2 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | Basic1, GPIO2 |
| 2 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | DC_IN1, DC_OUT1 |
| 2 | IRF3205 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 2 | USB_A | Connector_USB:USB_A_CONNFLY_DS1095-WNR0 | J4, J5 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | GPIO_6 |
Questions
What parts does the Expansion board B01 use?
41 parts, built around the IRF3205. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Expansion board B01 KiCad files?
From the germandevelop/beaglebone-node repository on GitHub, at the commit this page was made from: the board is docs/scheme/expansion_board_B01/expansion_board_B01.kicad_pcb and its schematic docs/scheme/expansion_board_B01/expansion_board_B01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Expansion board B01 design in my own project?
Its repository states no licence, so its author keeps all rights: ask germandevelop before reusing the design.
Similar boards
- 2 layers50.2 × 73 mm
- 2 layers98.8 × 55.1 mm
H bridge controller
jayanta525/dual-h-bridge
Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller
104 parts5MIT - 2 layers90 × 44 mm
- 2 layers80 × 100 mm
- 4 layers104.1 × 132.6 mm
- 2 layers92.6 × 52 mm
SineWaveInverter
ampnics/Project-10
Mater KiCad with Projects is a series of lectures in which we are learning PCB designing
44 parts2 - 2 layers65 × 30 mm
