4 layers68.6 × 53.3 mm
Icezum
FPGAwars/icezum
:star2: IceZUM Alhambra: an Arduino-like Open FPGA electronic board
218 parts357GPL-3.0
2 layers130 × 60 mm
TrackController
GerardHarkema/modelspoor- Size
- 130 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 67
- Pads
- 176
- Tracks, vias
- 284, 3
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 10 Dec 2023
- Updated
- 14 May 2024
Overview
TrackController is an open-source printed circuit board by GerardHarkema, from the GerardHarkema/modelspoor repository on GitHub. It is a 2-layer board of 130 × 60 mm with 24 parts on 67 nets, routed with 284 tracks and 3 vias.
It is built around the TXS0108EPW. Its parts include 4 switches, 3 resistors, 3 ICs, 2 capacitors and 2 connectors. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdTest
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4 |
| 2 | 100nF | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C2, C4 |
| 2 | 100uF/25V | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | CP1, CP3 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3 |
| 2 | LOGO | LOGO | G***, G1 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J3 |
| 1 | DE9_Plug_MountingHoles | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J1 |
| 1 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | TXS0108EPW | my_footprints:Texas_TXS0108E_Level_Shifter_Module | U1 |
| 1 | mini_esp32 | ESP32_mini:ESP32_mini | ESP32 |
| 1 | ~ | railtrack:MP1484 Module | U2 |
| 1 | ~ | railtrack:IBT_2 | IBT_2 |
| 1 | ~ | railtrack:1.77 LCD Display 128x160 | LCD1 |
| 1 | ~ | Package_TO_SOT_THT:TO-92 | U3 |
| 1 | ~ | railtrack:MCP2515 Module | CAN-MODULE1 |
| 1 | ~ | railtrack:Arduino_Shield | MOTOR-SHIELD1 |
Questions
How big is the TrackController PCB?
It measures 130 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TrackController use?
24 parts, built around the TXS0108EPW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TrackController KiCad files?
From the GerardHarkema/modelspoor repository on GitHub, at the commit this page was made from: the board is KiCad/TrackController/TrackController.kicad_pcb and its schematic KiCad/TrackController/TrackController.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TrackController design in my own project?
Its repository states no licence, so its author keeps all rights: ask GerardHarkema before reusing the design.
Similar boards
- 2 layers94.5 × 74.4 mm
Ax58100-stm32-ethercat
MetalMusings/MyOwnEtherCATDevice
Documentation accompanying the "Make My Own EtherCAT device" video serie on Youtube.
184 parts93 - 4 layers80 × 100 mm
Baseboard
NVIDIA-AI-IOT/my-jetson-nano-baseboard
An open source Jetson Nano baseboard and tools to design your own.
240 parts91 - 4 layers80 × 73.8 mm
ESP32-Bit Pirate Dock
AndreiVladescu/ESP32-Bit-Pirate-Hardware
Carrier breaker-board for the ESP32-S3 Devkit. Works great with the ESP32-Bit-Pirate firmware.
49 parts85CERN-OHL-W-2.0 - 4 layers42.8 × 36.8 mm
- 2 layers81.3 × 30.9 mm
ISABlaster
scrapcomputing/ISABlaster
A software-defined ISA card powered by a Raspberry Pi Pico
24 parts53GPL-2.0 - 4 layers29 × 50.3 mm
Toshiba hvac esp32
florianbrede-ayet/esphome-toshiba-hvac-controller
ESPhome component & hardware to control Toshiba & Carrier HVAC units with WIFI interface
7 parts38MIT - 4 layers65 × 100 mm
