
HP45 Standalone V3.01 Controller
georgeExotic/Vulcan_Labs
ESET 419/420 Senior Design Project. VULCAN LABS.

ESET 419/420 Senior Design Project. VULCAN LABS.
HP45 Standalone V3.00 Driver is an open-source printed circuit board by georgeExotic, from the georgeExotic/Vulcan_Labs repository on GitHub. It is a 2-layer board of 40 × 80 mm with 41 parts on 91 nets, routed with 1,076 tracks and 124 vias.
It is built around the TLC59213IN, HEF4017BT and LM311. Its parts include 12 resistors, 11 capacitors, 7 ICs, 3 transistors and 3 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uF | Capacitors_SMD:C_0603 | C1, C6, C7, C8, C10, C11 |
| 6 | 2.2k | Resistors_SMD:R_0603 | R1, R2, R3, R4, R9, R10 |
| 3 | 330 | Resistors_SMD:R_0603 | R7, R11, R12 |
| 3 | HEF4017 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | IC1, IC3, IC6 |
| 2 | 100uF | Capacitors_SMD:CP_Elec_8x10 | C3, C5 |
| 2 | 10k | Resistors_SMD:R_0603 | R6, R8 |
| 2 | 1uF | Capacitors_SMD:C_0603 | C2, C4 |
| 2 | CONN_01X16 | Socket_Strips:Socket_Strip_Straight_1x16_Pitch2.54mm | J1, J2 |
| 2 | Q_NMOS_GSD | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2 |
| 2 | TLC59213 | Housings_SSOP:TSSOP-20_4.4x6.5mm_Pitch0.65mm | IC2, IC4 |
| 1 | 1.2k | Resistors_SMD:R_0603 | R5 |
| 1 | 1uF | Capacitors_SMD:CP_Elec_4x5.8 | C9 |
| 1 | HCF4081 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | IC5 |
| 1 | HP45_connector | Electronics:HP45_SMD_connector | Con1 |
| 1 | LM311 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | IC7 |
| 1 | LOGO | Electronics:Ytec_Logo | G*** |
| 1 | Q_NMOS_SGD | Electronics:SO-8_PowerPAK | Q3 |
The 37 most common of 41 parts.

georgeExotic/Vulcan_Labs
ESET 419/420 Senior Design Project. VULCAN LABS.

georgeExotic/Vulcan_Labs
ESET 419/420 Senior Design Project. VULCAN LABS.

yvodehaas/HP45-standalone-controller-V4.02
HP45 standalone controller V4.02

wilywyrm/RGB-LED-Driver
8x8 RGB LED Driver code and PCB files. Designed for MSP430




artemisamsx/artemisa
Schematics, PCB designs and HDL simulations to build a 8-bits MSX computer

andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers

It measures 40 × 80 mm and has 2 copper layers, 1.6 mm thick.
41 parts, built around the TLC59213IN, HEF4017BT and LM311. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the georgeExotic/Vulcan_Labs repository on GitHub, at the commit this page was made from: the board is .other/Original/Electrical/HP45 Standalone V3.00/Driver board V3.00/HP45 Standalone V3.00 Driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask georgeExotic before reusing the design.