4 layers72.5 × 87.3 mm
Mouse V1
great-houk/mouse-project
Contains all the relevant folders for the entire custom mouse project
138 parts158MIT
4 layers87.2 × 22.6 mm
Sagittarius S1
GeneralSyb/Sagittarius-Headtracker6Project files for the Sagittarius S1 Prototype
- Size
- 87.2 × 22.6 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 45
- Nets
- 50
- Pads
- 178
- Tracks, vias
- 226, 121
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Jan 2024
- Updated
- 27 Jan 2024
Overview
Sagittarius S1 is an open-source printed circuit board by GeneralSyb, from the GeneralSyb/Sagittarius-Headtracker repository on GitHub, published under the MIT licence. It is a 4-layer board of 87.2 × 22.6 mm with 45 parts on 50 nets, routed with 226 tracks and 121 vias.
It is built around the ESP32-C3-WROOM-02-H4, LSM6DSV16X and MIC5504-1.8YM5-TR, with the XC6220B331MR-G, PTS526SM15SMTR2LFS and CM1231-02SO among its other parts. Its parts include 13 capacitors, 11 resistors, 6 ICs, 4 diodes and 3 switches. It belongs with the ESP32 and RISC-V boards of this library.
Main components
8
ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
LSM6DSV16X
LGA-14_2.5x3mmUncategorisedSTMicroelectronics
MIC5504-1.8YM5-TR
SOT-23-5-40℃~+125℃@(Tj) 1 1.8V 175uVrms 300mA 380mV@(300mA) 5.5V 55uA 60dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsXC6220B331MR-G
SOT-25-40℃~+85℃ 1 1A 3.3V 50dB@(1kHz) 655mV@(1A) 6V 8uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Output discharge Positive SOT-25 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
PTS526SM15SMTR2LFS
SMD-4P,5.2x5.2mm-20℃~+70℃ 1.5mm 1.6N 12V 5.2mm 5.2mm 50mA Gull Wing IP40 Round Button SPST-NO Surface Mount,Vertical SMD-4P,5.2x5.2mm Tactile Switches ROHSC&KTactile Switches
CM1231-02SO
SOT-23-6-40℃~+85℃ 1.5pF 1A@8/20us 2 5V 9V Bidirectional ESD IEC 61000-4-2 SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)
JS102011SAQN
SMD-40℃~+85℃ 3.5mm 300mA 5,000 cycles 6V 9mm Black Rectangular Columnar SMD(SMT) Tab SPDT Surface Mount, Right Angle SMD Slide Switches ROHSC&KSlide Switches
USB4110-GF-A
SMD-40℃~+85℃ 1 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
Sagittarius S1 (0.1)/PCB/Project files/readme.mdPlease refer to the PCB schematic PDF to get any sort of information about the S1 V0.1 prototype. The PCB design is flawed and rushed, isn't even complete and shouldn't be considered as something that you should make.
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 5k1 | Resistor_SMD:R_0402_1005Metric | R3, R4, R5, R6, R10, R11 |
| 4 | 100nF | Capacitor_SMD:C_0402_1005Metric | C7, C10, C11, C13 |
| 3 | 10uF | Capacitor_SMD:C_0402_1005Metric | C2, C4, C12 |
| 2 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C8, C9 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C1, C3 |
| 2 | 470 | Resistor_SMD:R_0402_1005Metric | R1, R7 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D3 |
| 2 | PTS526_SM15_SMTR2_LFS | CK:PTS526SM15SMTR2LFS | S2, S3 |
| 1 | 1A | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | 2A | Diode_SMD:D_SOD-123F | D4 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 2k7 | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | AP9101CK | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | CM1231-02SO | onsemi:SOT95P280X145-6N | D2 |
| 1 | DMN2053UVT-7 | Package_TO_SOT_SMD:SOT-23-6 | Q1 |
| 1 | ESP32-C3-WROOM-02-H4 | Espressif:ESP32C3WROOM02H4 | U1 |
| 1 | JS102011SAQN | CK:SW_JS102011SAQN | S1 |
| 1 | LSM6DSV16X | Packages:LGA-14L 2.5 x 3.0 | U5 |
| 1 | MCP73832-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | MIC5504-1.8YM5 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | USB4110-GF-A | OCT:USB4110GFA | J2 |
| 1 | XC6220B331MR-G | Torex:SOT95P280X130-5N | IC1 |
The 41 most common of 45 parts.
Questions
How big is the Sagittarius S1 PCB?
It measures 87.2 × 22.6 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Sagittarius S1 use?
45 parts, built around the ESP32-C3-WROOM-02-H4, LSM6DSV16X, MIC5504-1.8YM5-TR and XC6220B331MR-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sagittarius S1 KiCad files?
From the GeneralSyb/Sagittarius-Headtracker repository on GitHub, at the commit this page was made from: the board is Sagittarius S1 (0.1)/PCB/Project files/Sagittarius_S1.kicad_pcb and its schematic Sagittarius S1 (0.1)/PCB/Project files/Sagittarius_S1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sagittarius S1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers110 × 80 mm
STM32 Edge Computing Device
spyral98/ARM-Development-System-to-Support-Digital-Twin-of-Stepper-Motor
This repository consists of the work conducted for the thesis "ARM Development System to Support Digital Twin of Stepper Motor".
128 partsGPL-3.0 - 4 layers58 × 35 mm
ESP HI PLUS
dyu134/ESP-HI-PLUS
The Robot sub-module is a high-performance actuator and sensing expansion board for the ESP-HI-PLUS, designed to transform the device into a mobile or interactive robotic platform.
88 parts - 2 layers152.1 × 36 mm
ESProbeScope3300
noahensley/kicad-probe-scope
A KiCad PCB design created for ETEC 3300. The board is built around the ESP32-S2FN4R2 and combines USB-C connectivity, 2.4 GHz Wi-Fi (via an on-board chip antenna), a battery charging circuit, an LDO power rail, an…
77 partsMIT - 2 layers79.5 × 79.5 mm
Esp32-energymeter V2
ElektorLabs/esp32-energymeter
The Elektor ESP32 Energy Meter project, featuring schematics, PCB designs, and ESPHome integration for advanced energy monitoring
116 parts48MIT - 4 layers43.2 × 43.2 mm
Pogobot head
nekonaute/pogobot
Pogobot is an open-source open-hardware robotic platform for swarm robotics
140 parts21 - 2 layers25.6 × 44.5 mm
Esp32-chungus lipo
ayan4m1/esp-chungus
Chungus is an ESP32-S3 development board created as a learning exercise in KiCad.
27 parts2MIT - 2 layers53.3 × 68.6 mm
Arduino uno
Chicken-Fried/Cave-Uno
Modernized Arduino Uno R3 compatible board powered by Microchip ATmega328PB. Features driverless USB-C, 1.5A sync buck, ideal-diode OR-ing, dual I2C/SPI/UART, and LiDAR topographic artwork.
85 parts