
GEMS Ruby
GemsErasmusPlus/GEMS_Electronics
electronics design for the GEMS educational hardware

electronics design for the GEMS educational hardware
GEMS Diamond is an open-source printed circuit board by GemsErasmusPlus, from the GemsErasmusPlus/GEMS_Electronics repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 90 × 40 mm with 47 parts on 62 nets, routed with 567 tracks and 109 vias.
It is built around the ESP32-S3-WROOM-1-N8, DRV8411PWP and USBLC6-2SC6, with the DMG2305UX-13 among its other parts. Its parts include 16 resistors, 12 capacitors, 6 ICs, 5 diodes and 2 connectors. It belongs with the ESP32 boards of this library.
GEMS_Electronics repository contains selected results of Erasmus+ project GEMS that are directly related to the electronics design for the GEMS educational hardware.
Project GEMS - Graceful Equalising of Mechatronics Students aims to develop affordable educational hardware for mechatronics students, along with supporting online courses and tutorials. This will allow all students to have equal learning opportunities, regardless of their background or learning needs.
Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CMEPIUS. Neither the European Union nor the granting authority can be held responsible for them.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | GEMS_Library:C_1206_(3216) | C2, C5, C6, C7, C9, C10, C11, C12 |
| 6 | 10k | GEMS_Library:R_1206_(3216) | R11, R12, R13, R14, R15, R16 |
| 4 | 10uF | GEMS_Library:C_1206_(3216) | C1, C3, C4, C8 |
| 4 | 240 | GEMS_Library:R_1206_(3216) | R3, R8, R9, R10 |
| 3 | 100k | GEMS_Library:R_1206_(3216) | R1, R2, R4 |
| 2 | 5.1k | GEMS_Library:R_1206_(3216) | R5, R6 |
| 2 | CAN_connector | GEMS_Library:IDC8_Micro-MaTch | CAN1, CAN2 |
| 2 | Green | GEMS_Library:LED_D3.0mm | D2, D5 |
| 1 | 1M | GEMS_Library:R_1206_(3216) | R7 |
| 1 | ACS71240 | GEMS_Library:SOIC-8 | U5 |
| 1 | BTN | GEMS_Library:SW_PUSH_6mm_SMD | SW1 |
| 1 | ConnScrew_01x16 | GEMS_Library:TerminalScrew_1x16_P3.5mm | J2 |
| 1 | DMG2305UX-13 | GEMS_Library:SOT-23 | Q1 |
| 1 | DRV8411 | GEMS_Library:HTSSOP-16_4.4x5mm_P0.65mm | U4 |
| 1 | ESP32-S3-WROOM | GEMS_Library:ESP32-S3-WROOM | U2 |
| 1 | R1170H331B | GEMS_Library:SOT-89-5 | U1 |
| 1 | RST | GEMS_Library:SW_PUSH_6mm_SMD | SW2 |
| 1 | Red | GEMS_Library:LED_D3.0mm | D3 |
| 1 | TCAN332DR | GEMS_Library:SOIC-8 | U6 |
| 1 | USBLC6-2SC6 | GEMS_Library:SOT-23-6 | U3 |
| 1 | USB_C_USB2.0 | GEMS_Library:USB-C_MOLEX-216990-0001 | J1 |
| 1 | XBS306 | GEMS_Library:DO-214_(SMA) | D1 |
| 1 | Yellow | GEMS_Library:LED_D3.0mm | D4 |
The 46 most common of 47 parts.

GemsErasmusPlus/GEMS_Electronics
electronics design for the GEMS educational hardware

GemsErasmusPlus/GEMS_Electronics
electronics design for the GEMS educational hardware

GemsErasmusPlus/GEMS_Electronics
electronics design for the GEMS educational hardware

GemsErasmusPlus/GEMS_Electronics
electronics design for the GEMS educational hardware

eloicote/remote_omnidirectional_droid
ESP32 based freemoving drone with a camera for FPV which utilizes three omniwheels in a delta formation to move freely in 3 dimensions

windsorschmidt/reflow
Hardware and firmware sources for a 2-channel reflow (toaster) oven controller. KiCad schematic & PCB.

rees3901/BluepawsV4
version 4 of my on-going cat tracker project. this differs in structure in that both the TX collar and Rx homehub will be in the same repo to ensure intercompatability

mayermakes/00Keyboard
an open source ortholinear BLE keyboard. from scratch, including Firmware, video on element14presents

romioRN/Dash6.8-hardware
wifi name "service", password 12345678, connect to 192.167.4.1

eggsampler/ESP32-S3-Breakout
A minimal breakout board for the ESP32-S3-WROOM module


PSU-Ext-Org/psu-ext-hardware
A repository to store PSU-EXT hardware design assets, schematics, circuit diagrams, CAD files and manufacturing data.
It measures 90 × 40 mm and has 2 copper layers, 1.6 mm thick.
47 parts, built around the ESP32-S3-WROOM-1-N8, DRV8411PWP, USBLC6-2SC6 and DMG2305UX-13. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GemsErasmusPlus/GEMS_Electronics repository on GitHub, at the commit this page was made from: the board is GEMS_Diamond/GEMS_Diamond.kicad_pcb and its schematic GEMS_Amethyst/GEMS_Amethyst.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).