Skip to the content
2 layers94.9 × 116.5 mmMixer controls, the printed circuit board in 3D

Mixer controls

gehel/synth
Size
94.9 × 116.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
51
Nets
83
Pads
233
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 7 (file 20221018)
Created
4 Oct 2023
Updated
2 May 2026

Overview

Mixer controls is an open-source printed circuit board by gehel, from the gehel/synth repository on GitHub. It is a 2-layer board of 94.9 × 116.5 mm with 51 parts on 83 nets.

Its parts include 9 connectors, 1 resistor and 1 diode. It belongs with the audio and music boards of this library.

Parts

51
QtyValueFootprintReferences
19AudioJack3Library:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHolesFX_RETURN_L1, FX_RETURN_L2, FX_RETURN_R1, FX_RETURN_R2, FX_SEND_L1, FX_SEND_L2, FX_SEND_R1, FX_SEND_R2, HP_OUT1, IN1, IN2, IN3, IN4, LINE_IN_L1, LINE_IN_L2, LINE_IN_R1 +3
16100KLibrary:Potentiometer_Bourns_PTV09A-1_Single_VerticalFX1_SEND1, FX1_SEND2, FX1_SEND3, FX1_SEND4, FX2_SEND1, FX2_SEND2, FX2_SEND3, FX2_SEND4, IN_LVL1, IN_LVL2, IN_LVL3, IN_LVL4, PAN1, PAN2, PAN3, PAN4
5100KLibrary:Potentiometer_Alpha_RD902F-40-00D_Dual_VerticalFX_LVL1, FX_LVL2, LINE_LVL1, LINE_LVL2, OUT_LVL1
4Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ3, J4, J5, J6
3Conn_01x08Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ7, J8, J9
2Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1, J2
14.7KLibrary:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1LEDLED_THT:LED_D3.0mmD1

More from gehel/synth

12
  • 4 layers163 × 116.5 mmSequencer, the printed circuit board in 3D

    Sequencer

    gehel/synth

    158 parts
  • 2 layers131 × 69 mmController, the printed circuit board in 3D

    Controller

    gehel/synth

    129 parts
  • 2 layersMixer, the printed circuit board in 3D

    Mixer

    gehel/synth

    121 parts
  • 4 layers46 × 113 mmVCO, the printed circuit board in 3D

    VCO

    gehel/synth

    96 parts
  • 2 layers49.8 × 44.3 mmLFO, the printed circuit board in 3D

    LFO

    gehel/synth

    94 parts
  • 4 layers68.1 × 53.3 mmVCA, the printed circuit board in 3D

    VCA

    gehel/synth

    82 parts
  • 4 layers92.7 × 82.3 mmNoise, the printed circuit board in 3D

    Noise

    gehel/synth

    80 parts
  • 4 layers86.6 × 80 mmVCF, the printed circuit board in 3D

    VCF

    gehel/synth

    76 parts

Similar boards

  • 2 layers216.9 × 86.8 mmSweepv2, the printed circuit board in 3D

    Sweepv2

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    51 parts2.1k
  • 2 layers49.4 × 94.2 mmPin board 1, the printed circuit board in 3D

    Pin board 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    51 parts1.2k
  • 2 layers72 × 42 mmNRF24 jammer, the printed circuit board in 3D

    NRF24 jammer

    W0rthlessS0ul/nRF24_jammer

    The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.

    51 parts1kMIT
  • 2 layers170 × 162 mmSnowflake, the printed circuit board in 3D

    Snowflake

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    51 parts915
  • 2 layers33 × 50 mmESP32-bat monitor latch, the printed circuit board in 3D

    ESP32-bat monitor latch

    pcbreflux/espressif

    all espressif stuff will committed here

    51 parts608GPL-3.0
  • 2 layersTUSS4470 shield, the printed circuit board in 3D

    TUSS4470 shield

    Neumi/open_echo

    Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

    51 parts530
  • 2 layers45.7 × 123.5 mmMASTER ARM PANEL, the printed circuit board in 3D

    MASTER ARM PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    51 parts431
  • 2 layers50.8 × 69.2 mmUikit, the printed circuit board in 3D

    Uikit

    vsfteam/vsf

    Versaloon Software Framework -- a tiny preemptive-capable event-driven incremental software framework for embedded systems

    51 parts341Apache-2.0

Questions

How big is the Mixer controls PCB?

It measures 94.9 × 116.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Mixer controls use?

51 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mixer controls KiCad files?

From the gehel/synth repository on GitHub, at the commit this page was made from: the board is Mixer/Mixer-controls/Mixer-controls.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mixer controls design in my own project?

Its repository states no licence, so its author keeps all rights: ask gehel before reusing the design.