2 layers218.5 × 159.5 mm
2 layers30.8 × 31.6 mm
Meshproto
geekscape/meshprotoMeshProto module: Hardware and software repository
- Size
- 30.8 × 31.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 118
- Nets
- 94
- Pads
- 132
- Tracks, vias
- 78, 0
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 18 Oct 2013
- Updated
- 6 Mar 2014
Overview
Meshproto is an open-source printed circuit board by geekscape, from the geekscape/meshproto repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 30.8 × 31.6 mm with 118 parts on 94 nets, routed with 78 tracks and 0 vias.
Its parts include 108 connectors and 1 IC.
README
README.mdmeshproto
MeshProto module: Hardware and software repository.
About:
Prototyping board with mounting points and pinouts to match MeshThing and MeshUSB.
Parts
118| Qty | Value | Footprint | References |
|---|---|---|---|
| 74 | CONN_1 | _MP_:_MP_1Pin | P21, P22, P23, P24, P25, P26, P27, P28, P29, P30, P31, P32, P33, P34, P35, P36 +58 |
| 14 | CONN_1 | _MP_1Pin | P95, P96, P97, P98, P99, P100, P101, P102, P103, P104, P105, P106, P107, P108 |
| 10 | CONN_1 | _MP_:_MP_PIN_ARRAY_1-Right | P11, P12, P13, P14, P15, P16, P17, P18, P19, P20 |
| 10 | CONN_1 | _MP_:_MP_PIN_ARRAY_1-Left | P1, P2, P3, P4, P5, P6, P7, P8, P9, P10 |
| 4 | P*** | _MP_MountingHole | 1PIN1, 1PIN2, 1PIN3, 1PIN4 |
| 2 | M9Logo-2mm | _M9Logo_:M9Logo-scaled | VAL, VAL |
| 1 | LOGO | OSHWLogo:LOGO | G*** |
| 1 | XBEE | _MUSB_XBee_Board_OUTLINE_ONLY | U1 |
| 1 | XBeeLeftPins | _MP_:_MP_XbeeTH10Pin | H1 |
| 1 | XBeeRightPins | _MP_:_MP_XbeeTH10Pin | H2 |
Questions
How big is the Meshproto PCB?
It measures 30.8 × 31.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Meshproto use?
118 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Meshproto KiCad files?
From the geekscape/meshproto repository on GitHub, at the commit this page was made from: the board is Hardware/MeshProto.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Meshproto design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers139.1 × 107.7 mm
Lotus58 Glow 131
TweetyDaBird/Lotus-58-Classic
A split ergo linear keyboard derived from the Lily58 family
118 parts390 - 2 layers40 × 100 mm
Back pcb
ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!
118 parts148GPL-3.0 - 2 layers60 × 80 mm
RobotCrawler
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
118 parts94BSD-3-Clause - 2 layers142.1 × 106 mm
- 2 layers99.6 × 100 mm
PCB Fujitora
OPRobots/FujitoraBot
Robotracer - siguelíneas de alto rendimiento; con succión, tracción brushless en sistema tetra y procesador STM32F4
118 parts68GPL-3.0 - 2 layers100 × 80 mm
Panel
richardeoin/ax
This repository contains hardware and software for the AX5043 and AX5243 radios from AxSemi (now ON Semiconductor). They are probably the same die, but the AX5243 has fewer pins.
118 parts48 - 2 layers100 × 100 mm
