4 layers
4 layers99 × 41.5 mm
Esphome dot debug
gcormier/esphome-dot-debug- Size
- 99 × 41.5 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 28
- Nets
- 60
- Pads
- 145
- Tracks, vias
- 267, 69
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 Nov 2024
- Updated
- 3 Nov 2024
Overview
Esphome dot debug is an open-source printed circuit board by gcormier, from the gcormier/esphome-dot-debug repository on GitHub. It is a 4-layer board of 99 × 41.5 mm with 28 parts on 60 nets, routed with 267 tracks and 69 vias.
Its parts include 5 resistors, 4 connectors, 2 capacitors, 1 IC and 1 switch. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
README
readme.mdesphome-dot-debug
Debugging PCB for the project
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | TP_GND | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP12, TP15, TP16, TP19, TP20 |
| 4 | 5k1 | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R5 |
| 2 | 10u 50V | Capacitor_SMD:C_1206_3216Metric | C1, C2 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | ESP32-S3-WROOM-2 | Espressif:ESP32-S3-WROOM-2 | U1 |
| 1 | I2S1 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | Input | !esphome-dot:CONN_502598-2593_MOLEX | J4 |
| 1 | PROG | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | TP_3V3 | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP1 |
| 1 | TP_BTN | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP3 |
| 1 | TP_BTNINT | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP2 |
| 1 | TP_I2S0_CLK | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP13 |
| 1 | TP_I2S0_FSYNC | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP18 |
| 1 | TP_I2S0_SD | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP9 |
| 1 | TP_MCLK | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP8 |
| 1 | TP_SCL | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP6 |
| 1 | TP_SDA | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP4 |
| 1 | TP_TVDD | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP21 |
| 1 | USBC | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
Questions
How big is the Esphome dot debug PCB?
It measures 99 × 41.5 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Esphome dot debug use?
28 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esphome dot debug KiCad files?
From the gcormier/esphome-dot-debug repository on GitHub, at the commit this page was made from: the board is pcb/esphome-dot-debug.kicad_pcb and its schematic pcb/audio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esphome dot debug design in my own project?
Its repository states no licence, so its author keeps all rights: ask gcormier before reusing the design.
Similar boards
- 4 layers85 × 25 mm
- 4 layers25.1 × 34 mm
Pe42543 breakout
loxodes/vna
Under development open hardware microwave vector network analyzer
28 parts205 - 4 layers35.1 × 25.3 mm
T41-si5351A B GM Oscillator daughterboard
DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
28 parts66 - 4 layers38 × 25 mm
- 4 layers30 × 20 mm
Swd switch
alvarop/debugotron
Debugotron is a collection of debugging/automation tools I've wanted in the past but didn't have access to. Currently, the tools include:
28 parts52BSD-3-Clause - 4 layers48 × 48 mm
- 4 layers75 × 25 mm
