2 layers48 × 107 mm
2 layers64 × 67.1 mm
BitBadge
GaudiLabs/BitBadge5BitBadge - a creative reflow soldering badge. Place topleds on the grid to make your very own design.
- Size
- 64 × 67.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 6
- Pads
- 518
- Tracks, vias
- 226, 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 30 Jul 2018
- Updated
- 15 Nov 2024
Overview
BitBadge is an open-source printed circuit board by GaudiLabs, from the GaudiLabs/BitBadge repository on GitHub. It is a 2-layer board of 64 × 67.1 mm with 76 parts on 6 nets, routed with 226 tracks and 6 vias.
Its parts include 61 diodes, 1 resistor and 1 switch.
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 61 | LED_ALT | GaudiLabsFootPrints:TopLed_BitBadge_blink | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +45 |
| 4 | Fiducial | GaudiLabsFootPrints:Fiducial_1mm_Dia_2.54mm_Outer_CopperBottom | FID1, FID2, FID3, FID4 |
| 1 | Battery_Cell | GaudiLabsFootPrints:CR2032_Holder | BT2 |
| 1 | Battery_Cell_2x | GaudiLabsFootPrints:BAT_HOLDER_AAA_DOUBLE_BITBADGE | BT1 |
| 1 | LOGO | GaudiLabsLogos:GitHubCat_mask | G*** |
| 1 | LOGO | GaudiLabsLogos:BitBadge_logo_mask | G*** |
| 1 | LOGO | GaudiLabsLogos:BitBadge_logo | G*** |
| 1 | LOGO | GaudiLabsLogos:Peace_logo | G*** |
| 1 | R | Resistors_SMD:R_1210_HandSoldering | R1 |
| 1 | SW_2P3T | GaudiLabsFootPrints:SWITCH_MSS23D19 | SW1 |
The 73 most common of 76 parts.
Questions
How big is the BitBadge PCB?
It measures 64 × 67.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BitBadge use?
76 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BitBadge KiCad files?
From the GaudiLabs/BitBadge repository on GitHub, at the commit this page was made from: the board is BitBadge.kicad_pcb and its schematic BitBadge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BitBadge design in my own project?
Its repository states no licence, so its author keeps all rights: ask GaudiLabs before reusing the design.
Similar boards
- 2 layers85 × 115 mm
OSO BOOK B1
joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.
76 parts8.1kCC-BY-SA-4.0 - 2 layers77 × 97 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
76 parts1kGPL-3.0 - 2 layers137.9 × 92.7 mm
ErgoTravel
jpconstantineau/ErgoTravel
A Portable Ergonomic Split Keyboard inspired from the ErgoDox, Let's Split and Minidox
76 parts284MIT - 2 layers60.6 × 24.1 mm
Blep audio
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
76 parts253GPL-3.0 - 2 layers49 × 49 mm
OSBMS Balancer Rev 0.9
Teslafly/Dead-OpenBMS-dead
A scalable, open source battery management system
76 parts248 - 2 layers79 × 75 mm
PortableTerminal
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
76 parts222 - 2 layers35.1 × 36.6 mm
BinNanoFOC
katbinaris/nanofoc_devkit
Compact All-In-One BLDC Controler featuiring ESP32-S3, TMC6300 and Magalpha sensors. Small 35x35mm footprint.
76 parts146