

Power supply unit
- Size
- 37.5 × 86 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 9
- Pads
- 63
- Tracks, vias
- 18, 379
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 Mar 2022
- Updated
- 17 May 2024
Overview
Power supply unit is an open-source printed circuit board by GaryBlackbourne, from the GaryBlackbourne/raspberry-robot repository on GitHub. It is a 2-layer board of 37.5 × 86 mm with 24 parts on 9 nets, routed with 18 tracks and 379 vias.
It is built around the LM2576S-ADJ and AMS1117-3.3. Its parts include 6 capacitors, 4 resistors, 3 ICs, 3 connectors and 2 diodes. It belongs with the power boards of this library.
Main components
2LM2576S-ADJ
TO-263-5LTO-263-5L DC-DC Converters ROHSTDSEMICDC-DC ConvertersAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_2.5mm | MountingHole:MountingHole_2.5mm | REF01, REF02, REF03, REF03 |
| 2 | 1000u | Capacitor_SMD:C_Elec_10x10.2 | C3, C4 |
| 2 | 100u | Capacitor_SMD:C_Elec_6.3x7.7 | C1, C2 |
| 2 | 100u | Inductor_SMD:L_Fastron_PISR_Handsoldering | L1, L2 |
| 2 | 5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4 |
| 2 | D_Schottky | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D1, D2 |
| 2 | LM2576S-ADJ | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U1, U2 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 15k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 47u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | BMS_OUTPUT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J1 |
| 1 | PWR_CONN_CTRL | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 1 | PWR_CONN_RASPI | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J2 |
More from GaryBlackbourne/raspberry-robot
1- 4 layers91.4 × 63.5 mm

Similar boards
- 2 layers100 × 100 mm

Combo laser driver
adeboni/laser-projector
This project is for a quadruple laser projection controller, aimed at supporting room-scale projections
169 partsGPL-3.0 - 2 layers67.3 × 85.7 mm

- 4 layers99 × 139 mm

RCU
GhanGhan/SurvBot
Remote controlled robot that surveys the environment it is travelling in
148 parts - 2 layers110 × 103.3 mm

Voiture
KimotoHoitsu/Voiture-guidee-par-main
Ce projet consiste à développer une voiture télécommandée via un contrôleur personnalisé utilisant la communication Bluetooth Low Energy (BLE) et un accéléromètre ADXL.
74 parts - 2 layers47.5 × 85 mm

DigitEco POWER DE
r-map/rmap
rete monitoraggio ambientale partecipativo documentation at https://doc.rmap.cc
55 parts55 - 2 layers

- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0
Questions
How big is the Power supply unit PCB?
It measures 37.5 × 86 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Power supply unit use?
24 parts, built around the LM2576S-ADJ and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power supply unit KiCad files?
From the GaryBlackbourne/raspberry-robot repository on GitHub, at the commit this page was made from: the board is pcbs/power-supply-unit/power-supply-unit.kicad_pcb and its schematic pcbs/movement-control/movement-control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power supply unit design in my own project?
Its repository states no licence, so its author keeps all rights: ask GaryBlackbourne before reusing the design.