
Sam sung
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

A PCB to convert a Waveshare RP2040-Zero to the Pro Micro pinout and footprint
RP2040 ZERO REV is an open-source printed circuit board by gargum, from the gargum/RP2040-Zero-Micro repository on GitHub. It is a 2-layer board of 17.8 × 30.5 mm with 139 parts on 45 nets, routed with 830 tracks and 104 vias.
It belongs with the RP2040 boards of this library.
This is a PCB that converts the Waveshare RP2040-Zero in a drop-in replacement for a Pro Micro.
| RP2040-ZERO | PRO MICRO |
|---|---|
| 5V | RAW |
| 3V3 | VCC |
| GND | GND |
| GP0 | TX |
| GP1 | RX |
| GP2 | P4 |
| GP3 | P5 |
| GP4 | SDA |
| GP5 | SCL |
| GP6 | NONE |
| GP7 | P6 |
| GP8 | MISO |
| GP9 | P18 |
| GP10 | P10 |
| GP11 | P9 |
| GP12 | P8 |
| GP13 | P7 |
| GP14 | SCLK |
| GP15 | MOSI |
| GP26 | NONE |
| GP27 | P19 |
In this repository, there is a ZIP file called "RP2040_PRO_ZERO.ZIP". This is the precompiled ZIP file that one uses to order this from PCBWay or JLCPCB. The contents of this ZIP file can be seen in the RP2040_PRO_ZERO folder in this repository. The ZIP and the folder are simply a collection of gerber files.
On PCBWay, go to the website's home page, then click the "PCB Instant Quote" option in the top bar, before selecting the "Quick-order PCB". An option should appear on-screen reading, "+ Add Gerber File". Select this option, before uploading the precompiled RP2040_PRO_ZERO.ZIP file. Unzipping it is not necessary.
On JLCPCB, go to the website's homepage then simply click the "Order now" option. An option should appear on-screen reading, "Add gerber file". Select this option, before uploading the precompiled RP2040_PRO_ZERO.ZIP file. Unzipping it is not necessary.
Everything was made using Kicad. No other software was used, nor were any add-ons or extensions used. All of the Kicad files for this project are included in this repository. Kicad is free software available on any desktop operating system. Kicad does not require one to spend any money at any point in time, don't worry. If you want to modify this PCB for whatever reason, simply download this repository as a ZIP file, then extract all of that to a folder. From this folder, you can then simply double-click RP2040_ZERO_REV.kicad_pcb or RP2040_ZERO_REV.kicad, and it will open, allowing you to modify the PCB.
The solder jumpers on the bottom of the PCB must be connected in order for this to converter to function. "L" jumpers correspond to a standard Pro Micro footprint, while "R" jumpers correspond to a Pro Micro mirrored horizontally. All soldering is SMD, meaning the RP2040-Zero is soldered directly to this PCB without any pins. SMD pin headers are used on the bottom side, opposite the RP2040-Zero, to attach the completed unit to a board. The RP2040-Zero is to be soldered with its two buttons facing upwards. This obscures the extra connections on the MCU, so if those are needed, wires will need to be attached before the RP2040-Zero is attached to the PCB. There are two exposed pins, not including the pin connected to the WS2812 LED, that one is able to hand-solder additional connections to. The RST pin on the Pro Micro is not connected to anything on the RP2040-Zero, meaning the buttons on the MCU itself will need to be used to restart it or to enter the bootloader. Some projects place an OLED directly above the Microcontroller. If one wishes to do this, make sure one uses removable connections for the OLED rather than permanently soldering it on such that the buttons are accessible.
This product uses a mystery box license. One's rights regarding the use of this PCB, including whether or not it is even open source, are a secret. In order to learn what one is allowed to do with this PCB, one must ask the creator directly, who must then physically mail a tiny colourful box with the answer inside it.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 139 | , , , , , , , , , , , , , , , +123 |

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

vlkv/avalanche
The Avalanche keyboard is an ergonomic split keyboard with 4x6 (or 3x6 if you break off the 'digits' row) column staggered keys, 5 thumb keys, 1 additional key for the pinky (break off-able too) and 2 additional keys…
/Remote.kicad_pcb.jpg?size=s&soon)

Nicell/Dissatisfaction-65
A 65% QMK Bluetooth keyboard with an OLED and encoder

andreili/STM32-PLC
The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.

mirdej/synkie
The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann
It measures 17.8 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
139 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gargum/RP2040-Zero-Micro repository on GitHub, at the commit this page was made from: the board is RP2040_ZERO_REV.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask gargum before reusing the design.