2 layers58 × 42 mm
Rp2040 nema
raspberrypipress/raspberry-pi-pico-with-kicad
Project files from Design an RP2040 board with KiCad
32 parts31CERN-OHL-P-2.0
2 layers56.5 × 68.5 mm
Macro33
GameTec-live/macro33a attempt at building a small, low profile, portable macro pad...
- Size
- 56.5 × 68.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 65
- Pads
- 438
- Tracks, vias
- 462, 59
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 Jan 2025
- Updated
- 21 Oct 2025
Overview
Macro33 is an open-source printed circuit board by GameTec-live, from the GameTec-live/macro33 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 56.5 × 68.5 mm with 36 parts on 65 nets, routed with 462 tracks and 59 vias.
It is built around the RP2040, W25Q128JVSIQ and XYDBPCNANF-12MHZ. Its parts include 16 capacitors, 9 switches, 4 resistors, 3 ICs and 1 crystal. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
3
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
XYDBPCNANF-12MHZ
SMD2520-4P-20℃~+70℃ 12MHz 12pF Crystal Oscillator ±10ppm ±10ppm SMD2520-4P Crystals ROHSTAITIEN ElecCrystals
README
README.mdmacro33
an attempt at building a small, low profile, portable macro pad...
Features:
- USB-C
- RP2040 MCU
- QMK
- Hotswap sockets
- Mechanical switches
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C5, C7, C8, C9, C10, C11, C12, C13, C16 |
| 9 | SW_Push | Library:CherryMX_MidHeight_Choc_Hotswap_rev5 | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric | C14, C15 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C4, C6 |
| 2 | 27r | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 5.1k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | Conn_01x03_Socket | Library:SWD-Pads | SWD |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | RST |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U2 |
| 1 | XYDBPCNANF-12MHZ | Library:OSC-SMD_4P-L2.5-W2.0-BL | Y1 |
| 1 | ~ | Library:USB-C-SMD_C67380 | USBC1 |
Questions
How big is the Macro33 PCB?
It measures 56.5 × 68.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Macro33 use?
36 parts, built around the RP2040, W25Q128JVSIQ and XYDBPCNANF-12MHZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Macro33 KiCad files?
From the GameTec-live/macro33 repository on GitHub, at the commit this page was made from: the board is macro33.kicad_pcb and its schematic macro33.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Macro33 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers85.6 × 67.5 mm
Dreamdrivecast
khill25/Dreamdrive
Open source Retro Rom Carts and ODEs by Dreamcraft Industries
63 parts26 - 2 layers113.7 × 79.3 mm
- 4 layers80 × 47 mm
- 4 layers74 × 104 mm
- 4 layers53.2 × 53.2 mm
Smart lcc
variegated-coffee/open-lcc-board
Schematics and PCB files for the Open LCC hardware
117 parts30CERN-OHL-P-2.0 - 6 layers69 × 54 mm
Open control board
variegated-coffee/all-purpose-espresso-controller
Espresso electronics are usually proprietary affairs with little to no expandability. The purpose of this project is to give everyone an open source alternative with lots of features and flexibility.
201 parts14CERN-OHL-P-2.0 - 4 layers98 × 124.4 mm
Piberry.beepy
CarbonComputers/Piberry-12
PiBerry v12 marks the final and most refined revision of the PiBerry handheld Linux terminal. Designed with both form and function in mind, this version brings together the best elements of previous iterations while…
132 parts9MIT