gamaPhy/Hallmoeba6This repository contains assets for the Hallmoeba, a single-switch PCB for Gateron's KS-20 Hall effect switch. It is also compatible with Wooting's Lekker switch, which is based on the KS-20.
Hallmoeba is an open-source printed circuit board by gamaPhy, from the gamaPhy/Hallmoeba repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 19.1 × 19 mm with 24 parts on 7 nets, routed with 60 tracks and 16 vias.
It is built around the SLSS49E-3 and SK6812MINI-E. Its parts include 14 connectors, 4 capacitors, 3 resistors, 1 IC and 1 diode.
This repository contains assets for the Hallmoeba, a single-switch PCB for Gateron's KS-20 Hall effect switch. It is also compatible with Wooting's Lekker switch, which is based on the KS-20.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J12, J14 |
| 3 | R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2, R3 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C4 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | Conn_01x01_Pin | Connector_PinHeader_1.27mm:PinHeader_1x01_P1.27mm_Vertical | J11, J13 |
| 1 | SK6812MINI-E | prettylib:SK6812MINI_E | D1 |
| 1 | SLSS49E | Package_TO_SOT_SMD:SOT-23-3 | U1 |
| 1 | SW_Lekker_MX_1.00u_PCB | Button_Switch_Keyboard:SW_Lekker_MX_1.00u_PCB | SW |
gamaPhy/Hallmoeba
This repository contains assets for the Hallmoeba, a single-switch PCB for Gateron's KS-20 Hall effect switch. It is also compatible with Wooting's Lekker switch, which is based on the KS-20.
byungyoonc/TrueStrike42
TrueStrike42 is a columnar staggered unibody split keyboard designed to maximize performance and minimize finger fatigue.
byungyoonc/TrueStrike56
TrueStrike56 is a columnar staggered unibody split hall effect keyboard with popular 4x6_4 layout.
It measures 19.1 × 19 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the SLSS49E-3 and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gamaPhy/Hallmoeba repository on GitHub, at the commit this page was made from: the board is hallmoeba/hallmoeba.kicad_pcb and its schematic hallmoeba/hallmoeba.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).