

Vault35 ortho rounded
Ortholinear variant of vault35 by projectcain
- Size
- 209.7 × 76.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 132
- Nets
- 85
- Pads
- 585
- Tracks, vias
- 524, 60
- Pours
- 450
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 15 Jun 2022
- Updated
- 29 Aug 2022
Overview
Vault35 ortho rounded is an open-source printed circuit board by galvy0, from the galvy0/vault35_ortho repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 209.7 × 76.4 mm with 132 parts on 85 nets, routed with 524 tracks and 60 vias.
It is built around the ATMEGA32U4-MU and SRV05-4. Its parts include 9 capacitors, 6 switches, 2 resistors, 2 ICs and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA32U4-MU
VQFN-44-EP(7x7)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH VQFN-44-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)SRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
README
README.mdVault35 Ortho PCB
Ortho version of Cain's Vault35 keyboard.
Check out the original product and other awesome projects of Cain at https://mechvault.net/.
Current Progress
PCB has been tested and is good to go.
Now working on plates.

PCB
PCB Renders

Layout Options

Plate
Many plate configurations are possible depending on the use of the middle column.
Various plate options can be found in plates folder.
This is the most inclusive version, which supports every configuration except 3u stabs on macro column:

Firmware
https://github.com/galvy0/qmk_firmware/tree/galvy/keyboards/galvy/vault35_ortho
Parts
132| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | KEYSW | MX_Only:MXOnly-1U-NoLED | K_SPACE1, K_SPACE2, K_SPACE10, K_SPACE11, K_SPACE12, K_SPACE13, K_SPACE14, K_SPACE15, K_SPACE16, K_SPACE17, K_SPACE18, K_SPACE19, K_SPACE20, K_SPACE21, K_SPACE22, K_SPACE23 +26 |
| 40 | D | Diode_SMD:D_SOD-123 | D_SPACE1, D_SPACE2, D_SPACE10, D_SPACE11, D_SPACE12, D_SPACE13, D_SPACE14, D_SPACE15, D_SPACE16, D_SPACE17, D_SPACE18, D_SPACE19, D_SPACE20, D_SPACE21, D_SPACE22, D_SPACE23 +24 |
| 6 | KEYSW | MX_Only:MXOnly-1.25U-NoLED | K_SPACE49, K_SPACE52, K_SPACE53, K_SPACE54, K_SPACE55, K_SPACE56 |
| 4 | 0.1uf | Capacitor_SMD:C_0805_2012Metric | C5, C6, C7, C8 |
| 4 | KEYSW | MX_Only:MXOnly-1.5U-NoLED | K_SPACE34, K_SPACE40, K_SPACE60, K_SPACE61 |
| 3 | KEYSW | MX_Only:MXOnly-3U-ReversedStabilizers-NoLED | K_SPACE57, K_SPACE58, K_SPACE59 |
| 3 | RotaryEncoder_Switch | encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW2, SW3, SW4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | UR1, UR2 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | UR3, UR4 |
| 2 | KEYSW | MX_Only:MXOnly-1.75U-NoLED | K_SPACE50, K_SPACE51 |
| 2 | KEYSW | MX_Only:MXOnly-2U-ReversedStabilizers-NoLED | K_SPACE43, K_SPACE44 |
| 2 | OLED | kbd:OLED_v2 | OL1, OL2 |
| 2 | SW_PUSH | Button_Switch_SMD:SW_SPST_SKQG_WithoutStem | SW1, SW6 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | UR5 |
| 1 | 1uf | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | ATmega32U4-M | Package_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm | U2 |
| 1 | AVR-ISP-6 | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J1 |
| 1 | Crystal_GND24_Small | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | X1 |
| 1 | HRO-TYPE-C-31-M-12 | Type-C:HRO-TYPE-C-31-M-12-HandSoldering | USB1 |
| 1 | KEYSW | MX_Only:MXOnly-2.25U-ReversedStabilizers-NoLED | K_SPACE47 |
| 1 | KEYSW | MX_Only:MXOnly-2.75U-ReversedStabilizers-NoLED | K_SPACE48 |
| 1 | Polyfuse_Small | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | SW_PUSH | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW5 |
The 131 most common of 132 parts.
Similar boards
- 4 layers40.6 × 17.8 mm

- 2 layers158.9 × 106.7 mm

Lyra HS
Malevolti/Lyra
A print at home 70 key split ortho keyboard inspired by the Corne, Lily58 & Sofle. For people who hate layers. This repo is currently a mess but thank you for stopping by.
95 parts18GPL-3.0 - 2 layers390.8 × 134.6 mm

- 2 layers141.5 × 36 mm

RGB HHKB Controller
Cipulot/RGB-HHKB-Controller
HHKB Pro 2 Keyboard Controller Board with RGB strip support.
33 parts8 - 2 layers247.7 × 77.5 mm

- 2 layers285 × 94.6 mm

Keyboard template-60
rominronin/katana60-pro
KiCad project for quick starting 60% keyboard projects.
180 parts1MIT - 2 layers285 × 94.6 mm

- 2 layers328.6 × 95.2 mm

Questions
How big is the Vault35 ortho rounded PCB?
It measures 209.7 × 76.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Vault35 ortho rounded use?
132 parts, built around the ATMEGA32U4-MU and SRV05-4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Vault35 ortho rounded KiCad files?
From the galvy0/vault35_ortho repository on GitHub, at the commit this page was made from: the board is vault35_ortho-rounded.kicad_pcb and its schematic vault35_ortho.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Vault35 ortho rounded design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).