
Esp32-wroom timer
AlessandroAU/Chorus32-ESP32LapTimer
This is an ESP32 port of the popular Chorus RF Laptimer

LDO 5v and 8v distribution pcb to provide logic and motor power for multiple fader slide pots
GR LDO Distribution is an open-source printed circuit board by GadgetReboot, from the GadgetReboot/LDO_Board repository on GitHub. It is a 2-layer board of 64.9 × 56.5 mm with 60 parts on 22 nets, routed with 186 tracks and 118 vias.
It is built around the AMS1117 and JK60-090. Its parts include 18 capacitors, 12 resistors, 7 connectors, 6 ICs and 6 fuses.
Design files
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C3, C4, C5, C6, C7, C8, C14, C15, C16, C17, C18 |
| 6 | AMS1117 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1, U2, U3, U4, U5, U6 |
| 6 | DNI | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C9, C10, C11, C12, C13 |
| 6 | JK60-090 | Fuse:Fuse_Littelfuse_395Series | F1, F2, F3, F4, F5, F6 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 5 | 1K2 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R6, R8, R10, R12 |
| 5 | 220r | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R5, R7, R9, R11 |
| 4 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4, J5, J6, J7 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | MH1, MH2, MH3, MH4 |
| 1 | 300r | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 910r | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | Conn_01x03 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J2 |
| 1 | Conn_01x04 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | LOGO | _Custom_Footprints:pcb way logo | G*** |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |

AlessandroAU/Chorus32-ESP32LapTimer
This is an ESP32 port of the popular Chorus RF Laptimer




uli/basicengine-pcb
Schematics and PCB layout for the BASIC Engine home computer



MR-DOS/TDR_diploma_thesis
Time domain reflectometer. Includes Hardware, firmware and GUI in Octave. Also a diploma thesis.
It measures 64.9 × 56.5 mm and has 2 copper layers, 1.6 mm thick.
60 parts, built around the AMS1117 and JK60-090. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GadgetReboot/LDO_Board repository on GitHub, at the commit this page was made from: the board is KiCad/GR_LDO_Distribution.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask GadgetReboot before reusing the design.