2 layers29.8 × 49.7 mm
ESP32-RpiFS upgrade
futureshocked/RaspberryPi-FullStack-Upgrade-Project
This is the repository for Raspberry Pi Full Stack Upgrade Project, a course from Tech Explorations.
7 parts2MIT
2 layers44.6 × 17.8 mm
HAT v4 BME280 OLED
futureshocked/RaspberryPi-FullStack-Upgrade-Project2This is the repository for Raspberry Pi Full Stack Upgrade Project, a course from Tech Explorations.
- Size
- 44.6 × 17.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 17
- Pads
- 55
- Tracks, vias
- 215, 16
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Nov 2022
- Updated
- 5 Nov 2026
Overview
HAT v4 BME280 OLED is an open-source printed circuit board by futureshocked, from the futureshocked/RaspberryPi-FullStack-Upgrade-Project repository on GitHub, published under the MIT licence. It is a 2-layer board of 44.6 × 17.8 mm with 14 parts on 17 nets, routed with 215 tracks and 16 vias.
It is built around the BME280. Its parts include 5 resistors, 4 connectors, 3 diodes and 2 switches. It belongs with the lEDs and displays boards of this library.
Main components
1README
README.mdRaspberry Pi Full Stack Upgrade Project
This is the repository for Raspberry Pi Full Stack Upgrade Project, a course from Tech Explorations.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5 |
| 3 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1, SW2 |
| 1 | BME280 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | HC-12 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J1 |
| 1 | OLED | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | Raspberry_Pi_2_3 | Connector_PinSocket_2.54mm:PinSocket_2x09_P2.54mm_Vertical | J4 |
More from futureshocked/RaspberryPi-FullStack-Upgrade-Project
1Similar boards
- 2 layers70.1 × 43.2 mm
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396 - 4 layers38.6 × 39.5 mm
- 4 layers35.1 × 76.3 mm
Tiny4FSK
New-England-Weather-Balloon-Society/Tiny4FSK
Horus Binary v2 HAB Tracker
90 parts96CERN-OHL-W-2.0 - 2 layers29.8 × 33.7 mm
- 2 layers136 × 100 mm
ClimateSprinklerController
kbx81/ClimateSprinklerController
ESP32-based climate and sprinkler controller for use with ESPHome
194 parts56 - 4 layers36.6 × 60.3 mm
StratoSoar MK3.0
crnicholson/StratoSoar-MK3
StratoSoar MK3, an autonomous glider meant for high-altitudes, accessible to everyone
85 parts43 - 2 layers23 × 50 mm
- 2 layers97 × 77.5 mm
ESPlant
CCHS-Melbourne/ESPlant
Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266
77 parts37
Questions
How big is the HAT v4 BME280 OLED PCB?
It measures 44.6 × 17.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HAT v4 BME280 OLED use?
14 parts, built around the BME280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HAT v4 BME280 OLED KiCad files?
From the futureshocked/RaspberryPi-FullStack-Upgrade-Project repository on GitHub, at the commit this page was made from: the board is KiCad projects/RPIFSUPG-RPI-HAT_BME280_OLED_HC12/HAT_v4_BME280_OLED.kicad_pcb and its schematic KiCad projects/RPIFSUPG-ESP32-BME280_HC12/ESP32-RpiFS-upgrade.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HAT v4 BME280 OLED design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).