2 layers271.8 × 114.3 mm
Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
426 parts282
2 layers27.9 × 17.8 mm
This repository contains the PCB design project from the book and course "Kicad Lika a Pro"
- Size
- 27.9 × 17.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 17
- Pads
- 36
- Tracks, vias
- 72, 7
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 Aug 2018
- Updated
- 6 Jun 2020
Overview
RPi FS HAT is an open-source printed circuit board by futureshocked, from the futureshocked/KicadLikeAPro-Project-2-RaspberryPiFullStackHAT repository on GitHub, published under the MIT licence. It is a 2-layer board of 27.9 × 17.8 mm with 10 parts on 17 nets, routed with 72 tracks and 7 vias.
It is built around the DHT22. Its parts include 4 resistors, 2 diodes, 1 IC, 1 connector and 1 switch.
Main components
1README
README.mdKicad Like A Pro - Project 2 - Raspberry Pi Full Stack HAT
This repository contains the PCB design project from the book and course "Kicad Like a Pro"
In this project you will build on the knowledge and skill of the previous two project and design an Arduino-compatible board using, mostly, surface-mounted components.
The board will contain a micro controller, two EEPROM modules, a clock and calendar module, two crystal oscillators, and several SMD-sized resistors, capacitors and LEDs. In addition, it will include headers for connecting peripherals to the micro controller.
All this, in a relatively small board, measuring 44x28 mm. Working on this board will give you the opportunity to explore some of Kicad’s powerful features, such as splitting schematic diagrams into more than one sheets, using an external autorouter, and converting a two-layer board into a four layer board.
The name I have given to this board is “Battery powered Arduino with clock and extended EEPROM”. Or, let’s call it “BACEE”, for short.
Please go to techexplorations.com for more information about this book and other Tech Explorations courses and projects.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10KΩ | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 330Ω | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | DHT22 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U1 |
| 1 | LOGO | Custom libraries:TE_Logo_12mm | G*** |
| 1 | Raspberry_Pi_2_3 | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J1 |
| 1 | SW_DPST | freetronics_footprints:SW_PUSHBUTTON_PTH | SW1 |
Similar boards
- 2 layers104.8 × 72.1 mm
SST V2 4
mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework
53 parts110GPL-2.0 - 2 layers40.6 × 50.8 mm
Iot sourdough starter monitor
justinmklam/iot-sourdough-starter-monitor
Tracking the fermentation of sourdough starter over the cloud.
7 parts93GPL-3.0 - 2 layers28 × 13 mm
DHT22 pcb
MakersAsylumIndia/M19O2
M19O2 open source hardware Oxygen Concentrator based on the Pressure Swing Adsorption cycle aka Skarstorm cycle
5 parts68MIT - 2 layers136 × 100 mm
ClimateSprinklerController
kbx81/ClimateSprinklerController
ESP32-based climate and sprinkler controller for use with ESPHome
194 parts56 - 2 layers162 × 60 mm
Esp shield
felixwittwer/homeassistant_automaic_greenhouse
A cool Project to make your greenhouse smart. What about automaic irrigation and collecting enviromental data right from your garden.
20 parts27 - 2 layers74.9 × 40.6 mm
Anavi thermometer
AnaviTechnology/anavi-thermometer
WiFi Smart Thermometer with ESP8266, DHT22, DS18B20, OLED display and slots for up to 3 I2C sensor modules
25 parts17 - 2 layers81.3 × 36.8 mm
AirQualitySensor
Finomnis/AirQualitySensor
Simple Air Quality sensor based on nRF52840, Zigbee, AM2302/DHT22 and Senseair S8
44 parts16Apache-2.0
Questions
How big is the RPi FS HAT PCB?
It measures 27.9 × 17.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RPi FS HAT use?
10 parts, built around the DHT22. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RPi FS HAT KiCad files?
From the futureshocked/KicadLikeAPro-Project-2-RaspberryPiFullStackHAT repository on GitHub, at the commit this page was made from: the board is RPi FS HAT.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RPi FS HAT design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).