
Klp5e breadboard psu
futureshocked/KLP-5e-Vol1-Projects
KiCad Like a Pro, 5th Edition, Volume 1: finished KiCad projects (555 blinker, breadboard PSU, solar PSU)

KiCad Like a Pro, 5th Edition, Volume 1: finished KiCad projects (555 blinker, breadboard PSU, solar PSU)
Klp5e tiny solar supply is an open-source printed circuit board by futureshocked, from the futureshocked/KLP-5e-Vol1-Projects repository on GitHub, published under the MIT licence. It is a 2-layer board of 42.5 × 17 mm with 16 parts on 8 nets, routed with 51 tracks and 1 via.
It is built around the AP3015AKTR-G1 and SS14. Its parts include 4 resistors, 3 capacitors, 3 connectors, 2 diodes and 1 IC. It belongs with the power boards of this library.
These are the finished KiCad projects from Volume 1, Getting Started: Your First PCBs, part of KiCad Like a Pro, 5th Edition by Peter Dalmaris. The book teaches by building, and this repository holds the result of each build, so you can open a working project, compare it against your own, or pick up where you got stuck.
Book page and table of contents: https://techexplorations.com/kicad/book/
| Folder | Project | Book chapter | Board |
|---|---|---|---|
ch02-blinky/ | A 555 LED blinker, the project from the hands-on tour | Chapters 2 and 3 | 2-layer through-hole |
ch08-breadboard-psu/ | Breadboard power supply with a USB-C input | Chapter 8 | 2-layer, through-hole and SMD |
ch09-solar-psu/ | Tiny solar power supply (a rebuild of the Elektor design by Clemens Valens) | Chapter 9 | 2-layer, through-hole and SMD |
.kicad_pro file inside
the project folder you want.Each project folder is self-contained. The ch08 and ch09 projects keep their imported parts in a
local Libraries/ folder, and their library tables point at it with ${KIPRJMOD}, so nothing
needs installing.
chNN-<project>/
├── <project>.kicad_pro / .kicad_sch / .kicad_pcb the project, schematic and board
├── Gerbers/ manufacturing files: Gerber layers, one Excellon drill file, and the job file
├── BOM/ the bill of materials exported from the schematic
└── Libraries/ imported symbols, footprints and 3D models (ch08 and ch09)The files in Gerbers/ are ready to upload to a PCB manufacturer. The drill file is a single Excellon
file in millimetres with decimal coordinates, a format that fabricators such as NextPCB accept.
Chapter 10 of the book explains how it was produced and why that format matters.
The blinker board refers to KiCad's standard 3D models through the ${KICAD10_3DMODEL_DIR}
variable, which KiCad 10 sets for you. If the 3D viewer shows a bare board, open
Preferences, Configure Paths and check that the variable points at KiCad's 3dmodels folder.
The projects here are the author's finished versions. Your own may look a little different, and that is normal. Differences in placement and routing are fine as long as the design rules check (DRC and ERC) passes. If a project does not open, or something does not match the chapter, please open an issue on this repository.
The project files written for the book are released under the MIT licence.
ch08-breadboard-psu/Libraries/ and ch09-solar-psu/Libraries/ (symbols,
footprints and 3D models for the USB-C receptacle, slide switch, AP3015A, SS14 diode, inductor and
fuse) come from the parts' manufacturers and from SnapMagic, and they stay under their own terms.
The MIT licence does not cover them.Volume 2 of the book has its own project repository. See the book page above for the other volumes and for the video courses.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2, J3 |
| 2 | 1 M | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R4 |
| 2 | SS14 | footprints:SMA | D1, D2 |
| 1 | 10 k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
| 1 | 10 pF, 50 V | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C3 |
| 1 | 10 uH, 680 mA | footprints:IND_ASPI-0630LR-100M-T15 | L1 |
| 1 | 22 uF, 10 V | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C2 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 4.7 uF, 50 V | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 1 | 604 k, 1% | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | AP3015AKTR-G1 | footprints:SOT95P280X145-5N | U1 |
| 1 | SW_Wuerth_450301014042 | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |

futureshocked/KLP-5e-Vol1-Projects
KiCad Like a Pro, 5th Edition, Volume 1: finished KiCad projects (555 blinker, breadboard PSU, solar PSU)

futureshocked/KLP-5e-Vol1-Projects
KiCad Like a Pro, 5th Edition, Volume 1: finished KiCad projects (555 blinker, breadboard PSU, solar PSU)

futureshocked/KLP4e_Tiny-Solar-Supply
This is the repository for the "Tiny Solar Supply" project.


akshat-kumar10/solar-supply
The entire circuit and PCB were redesigned from scratch using KiCad EDA, while referring to the original Elektor concept strictly for educational and learning purposes.


chopda15/solar-power-supply
A tiny solar power supply project built with KiCad

dannywarmann/Tiny-Solar-Power-Supply-PCB-Redesign
This project is a learning-focused redesign of Elektor’s Tiny Solar Power Supply


It measures 42.5 × 17 mm and has 2 copper layers, 1.6 mm thick.
16 parts, built around the AP3015AKTR-G1 and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the futureshocked/KLP-5e-Vol1-Projects repository on GitHub, at the commit this page was made from: the board is ch09-solar-psu/klp5e-tiny-solar-supply.kicad_pcb and its schematic ch02-blinky/ch02-blinky.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).