
Tiny Solar Supply
futureshocked/KLP4e_Tiny-Solar-Supply
This is the repository for the "Tiny Solar Supply" project.

This project is a learning-focused redesign of Elektor’s Tiny Solar Power Supply
Tiny Solar Power Supply is an open-source printed circuit board by dannywarmann, from the dannywarmann/Tiny-Solar-Power-Supply-PCB-Redesign repository on GitHub. It is a 2-layer board of 38.4 × 19 mm with 17 parts on 10 nets, routed with 119 tracks and 19 vias.
It is built around the AP3015AKTR-G1, SS14 and ASPI-0630LR-100M-T15. Its parts include 4 resistors, 4 connectors, 3 capacitors, 2 diodes and 1 IC. It belongs with the power boards of this library.
This project is a learning-focused redesign of Elektor’s Tiny Solar Power Supply. The aim is to understand the fundamentals of solar energy harvesting and low-power power supply design through hands-on schematic capture and PCB layout.
The entire circuit and PCB were redesigned from scratch using KiCad EDA, while referring to the original Elektor concept strictly for educational and learning purposes
The system starts with a solar panel as the primary energy source. Since solar output varies with light conditions, the input stage conditions and stabilizes this energy before it is used further.
The conditioned solar input is then passed to a DC-DC regulation stage, which converts the variable input voltage into a usable and stable output suitable for low-power electronic circuits. Passive components around the regulator help improve stability and efficiency.
Finally, the regulated output is made available through the output terminals, allowing it to power small loads or act as a learning reference for energy-harvesting power supplies.
| Schematic | Layout |
|---|---|
![]() | ![]() |
| Top | Bottom |
|---|---|
![]() | ![]() |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J1, J3, J4 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric | R1, R3 |
| 2 | SS14 | Diode_SMD:D_SMA | D1, D2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 10pF 50V X7R(0805) | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 22uF 10V X7R(1206) | Capacitor_SMD:C_1206_3216Metric | C3 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 4.7uF 50V X7R(0805) | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 604k 1% | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | AP3015AKTR-G1 | AP3015AKTR-G1:SOT95P280X145-5N | U1 |
| 1 | ASPI-0630LR-100M-T15 | ASPI-0630LR-100M-T15:IND_ASPI-0630LR-100M-T15 | L1 |
| 1 | Conn_01x02_Pin | Button_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | J2 |
The 16 most common of 17 parts.

futureshocked/KLP4e_Tiny-Solar-Supply
This is the repository for the "Tiny Solar Supply" project.



chopda15/solar-power-supply
A tiny solar power supply project built with KiCad



guimarin4/tiny-solar-supply
Compact solar-powered DC-DC converter PCB designed in KiCad.

hdobuS/Tiny-Solar-Supply
This compact PCB charges a 1.23 V rechargeable AA battery using a solar panel during the day, and at night, it provides a regulated 3.3 V output suitable for powering applications like LED strips, sensors, and…
It measures 38.4 × 19 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the AP3015AKTR-G1, SS14 and ASPI-0630LR-100M-T15. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dannywarmann/Tiny-Solar-Power-Supply-PCB-Redesign repository on GitHub, at the commit this page was made from: the board is Tiny Solar Power Supply.kicad_pcb and its schematic Tiny Solar Power Supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dannywarmann before reusing the design.