4 layers30.7 × 56.9 mm
ESP32 Clone devkit
futureshocked/KLP3e_ESP32_development_kit
This is the repository for the "ESP32 Devkit clone" project.
36 parts5
4 layers31.4 × 57.3 mm
ESP32 Clone Devkit
futureshocked/KLP4e_ESP32-Clone-Devkit5This is the repository for the "ESP32 devikit clone" project.
- Size
- 31.4 × 57.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 69
- Pads
- 194
- Tracks, vias
- 723, 59
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 May 2024
- Updated
- 3 May 2024
Overview
ESP32 Clone Devkit is an open-source printed circuit board by futureshocked, from the futureshocked/KLP4e_ESP32-Clone-Devkit repository on GitHub, published under the MIT licence. It is a 4-layer board of 31.4 × 57.3 mm with 34 parts on 69 nets, routed with 723 tracks and 59 vias.
It is built around the CP2102N-A01-GQFN28R, ESP32-WROOM-32 and AMS1117-3.3, with the MMSS8050-H-TP among its other parts. Its parts include 10 resistors, 9 capacitors, 5 diodes, 3 connectors and 2 ICs. It belongs with the ESP32 boards of this library.
Main components
4
CP2102N-A01-GQFN28R
QFN-28-EP(5x5)-40℃~+85℃ 13.7mA 195uA 3Mbps 3V~3.6V Transceiver USB 2.0 QFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB Converters
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MMSS8050-H-TP
SOT-23-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 120 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSMicro Commercial ComponentsBipolar (BJT)
README
README.mdKLP4e_ESP32-Clone-Devkit
This is the repository for the "ESP32 devikit clone" project.
This is one of the projects from the course KiCad Like a Pro, 4th edition.
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1uF/50V(10%) | Capacitor_SMD:C_0402_1005Metric | C14, C19, C22 |
| 3 | 10K(5%) | Resistor_SMD:R_0402_1005Metric | R11, R21, R22 |
| 3 | TVS | Diode_SMD:D_SOD-323 | D4, D5, D6 |
| 2 | 0R(5%) | Resistor_SMD:R_0402_1005Metric | R17, R18 |
| 2 | 22uF/10V(20%) | Capacitor_SMD:C_0603_1608Metric | C3, C21 |
| 2 | 2K(5%) | Resistor_SMD:R_0402_1005Metric | R2, R24 |
| 2 | Conn_01x19_Pin | Connector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_Vertical | J2, J3 |
| 2 | MMSS8050-H-TP | MMSS8050-H-TP:TRANS_MMSS8050-H-TP | Q1, Q2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_B3S-1000 | SW1, SW2 |
| 1 | 0.1uF.50V(10%) | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 0.1uF/50V(10%)(NC) | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | 10K(5%)(NC) | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | 22 uF/10V(20%) | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 22.1K(5%) | Resistor_SMD:R_0402_1005Metric | R25 |
| 1 | 4.7uF/6.3V(10%) | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | 47.5K(5%) | Resistor_SMD:R_0402_1005Metric | R26 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | CP2102N-A01-GQFN28 | CP2102N-A01-GQFN28:QFN50P500X500X80-29N | U1 |
| 1 | D_Schottky | Diode_SMD:D_SOD-323 | D3 |
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32:MODULE_ESP32-WROOM-32 | MOD1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-AB_Molex_47590-0001 | J1 |
Questions
How big is the ESP32 Clone Devkit PCB?
It measures 31.4 × 57.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ESP32 Clone Devkit use?
34 parts, built around the CP2102N-A01-GQFN28R, ESP32-WROOM-32, AMS1117-3.3 and MMSS8050-H-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32 Clone Devkit KiCad files?
From the futureshocked/KLP4e_ESP32-Clone-Devkit repository on GitHub, at the commit this page was made from: the board is ESP32 Clone Devkit manual routing/ESP32 Clone Devkit.kicad_pcb and its schematic ESP32 Clone Devkit autorouted/ESP32 Clone Devkit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32 Clone Devkit design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers35.7 × 55.4 mm
- 4 layers30.5 × 56.8 mm
ESP 32 DEV KIT PCB Layout
RTX17LEO/ESP-32-DEV-MODULE
The ESP32 Dev Module is a powerful microcontroller with built-in Wi-Fi and Bluetooth, widely used for IoT and embedded applications.
34 parts - 4 layers30.4 × 56.5 mm
ESP32-DevKit Custom
chackojose2005-zodiac/ESP32-DevKit-Custom
4-layer ESP32 development board PCB clone based on Espressif ESP32-DevKitC-v4 reference design, made in KiCad
36 partsMIT - 4 layers30.3 × 56.7 mm
- 4 layers30.9 × 56.7 mm
ESP32-Dev Kit
Jazildebug/ESP32-Dev-Kit
KiCad project files for an ESP32 development board — schematic, PCB layout, and footprints for a custom dev kit design.
34 parts - 4 layers36.9 × 58 mm
Esp11
sreelekshmih2006-maker/ESP_32
This project is a custom 4-layer ESP32 development board designed in KiCad using the official Espressif ESP32-DevKitC V4 reference design as the foundation.
34 parts - 4 layers27.9 × 56 mm
ESP32
xAllGood/PCB-Design
This repository contains the schematic, layout, and design files for my PCB project.
34 parts