Skip to the content
2 layersBase30 pcb, the printed circuit board in 3D

base 30:30 60% split keyboard

Copper layers
2
Thickness
1.6 mm
Parts
78
Nets
85
Pads
319
Tracks, vias
85, 5
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
24 Dec 2022
Updated
27 Dec 2022

Overview

Base30 pcb is an open-source printed circuit board by furioustank986, from the furioustank986/base30_30 repository on GitHub. It is a 2-layer board with 78 parts on 85 nets, routed with 85 tracks and 5 vias.

It is built around the ATMEGA32U4-AU. Its parts include 31 diodes, 7 capacitors, 5 resistors, 1 IC and 1 switch. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

1

Parts

78
QtyValueFootprintReferences
31D_SmallDiode_SMD:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +15
23MX-NoLEDMX_Only:MXOnly-1U-NoLEDMX1, MX10, MX11, MX12, MX13, MX14, MX15, MX17, MX18, MX19, MX20, MX22, MX23, MX24, MX25, MX26 +7
4MX-NoLEDMX_Only:MXOnly-1.25U-NoLEDMX4, MX7, MX16, MX30
30.1uFCapacitor_SMD:C_0805_2012MetricC1, C2, C3
222Resistor_SMD:R_0805_2012MetricR3, R4
222pFCapacitor_SMD:C_0805_2012MetricC5, C6
25kResistor_SMD:R_0805_2012MetricR1, R2
2MX-NoLEDMX_Only:MXOnly-2.25U-NoLEDMX6, MX21
110kResistor_SMD:R_0805_2012MetricR5
110uFCapacitor_SMD:C_0805_2012MetricC4
1ATmega32U4-APackage_QFP:TQFP-44_10x10mm_P0.8mmU1
1C_SmallCapacitor_SMD:C_0805_2012MetricC7
1Crystal_GND24_SmallCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1HRO-TYPE-C-31-M-12Keebio-Parts:HRO-TYPE-C-31-M-12-AssemblyUSB1
1MX-NoLEDMX_Only:MXOnly-1.5U-NoLEDMX2
1MX-NoLEDMX_Only:MXOnly-1.75U-NoLEDMX3
1SW_Pushrandom-keyboard-parts:SKQG-1155865SW1

Similar boards

  • 2 layers243.2 × 106 mm3W6, the printed circuit board in 3D

    3W6

    weteor/3W6

    a small compact 3x5+3 split ortho keyboard

    113 parts488
  • 2 layers228.4 × 85 mmLeChiffre, the printed circuit board in 3D

    LeChiffre

    tominabox1/Le-Chiffre-Keyboard

    Great thanks goes to Jake at P3D for really making the case amazing and open sourcing his work. Check him out at P3Dstore.com

    105 parts183GPL-3.0
  • 2 layers228.6 × 76.8 mmSchwann Rev0.5b, the printed circuit board in 3D

    Schwann Rev0.5b

    The-Royal/The_Royal_Open-Source-Projects

    A Master Repository For All things Royal Made

    127 parts159MIT
  • 2 layers30 × 65 mmKeyboard mcu, the printed circuit board in 3D

    Keyboard mcu

    dpapavas/lagrange-keyboard

    A configurable, handwired, ergonomic keyboard

    26 parts137AGPL-3.0
  • 2 layers88.4 × 80 mmLHS Controller PCB, the printed circuit board in 3D

    LHS Controller PCB

    dmcke5/ZenDeck

    This is the second revision of my Mini PC based handheld Gaming PC! It is designed for a Beelink SER 5 Mini PC but could be adapted to other systems by changing the mounting brackets and outlet plate.

    76 parts133CERN-OHL-S-2.0
  • 2 layers259.5 × 89.1 mmSteno, the printed circuit board in 3D

    Steno

    crides/steno

    Embedded steno firmware + custom steno PCBs

    61 parts75MIT
  • 2 layers99.1 × 99.1 mmPower supply panelized, the printed circuit board in 3D

    Power supply panelized

    thebiguno/microcontroller-projects

    A home for a bunch of microcontroller projects which don't warrant their own repos.

    223 parts75
  • 2 layers323.9 × 95.1 mmUnSplit, the printed circuit board in 3D

    UnSplit

    swiftrax/UnSplit

    Ergo 40% mechanical keyboard with all components on the top with diodes arranged in an array

    110 parts68GPL-2.0

Questions

What parts does the Base30 pcb use?

78 parts, built around the ATMEGA32U4-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Base30 pcb KiCad files?

From the furioustank986/base30_30 repository on GitHub, at the commit this page was made from: the board is base30_pcb/base30_pcb.kicad_pcb and its schematic base30_pcb/base30_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Base30 pcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask furioustank986 before reusing the design.