2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0
2 layers
Lightboard
funeventsystems/board- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 53
- Pads
- 76
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 5 Jun 2023
- Updated
- 29 Mar 2024
Overview
Lightboard is an open-source printed circuit board by funeventsystems, from the funeventsystems/board repository on GitHub. It is a 2-layer board with 18 parts on 53 nets.
It is built around the ARDUINO UNO R3. Its parts include 11 switches and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
readme.mdBoard
Includes the configuration utility, among other things. A more organized version is available here:
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11 |
| 5 | R_Potentiometer | Potentiometer_SMD:Potentiometer_ACP_CA14-VSMD_Vertical_Hole | RV1, RV2, RV3, RV4, RV5 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | LED | LED_THT:LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O1.27mm_Z4.9mm | D1 |
Questions
What parts does the Lightboard use?
18 parts, built around the ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lightboard KiCad files?
From the funeventsystems/board repository on GitHub, at the commit this page was made from: the board is PCB/Arduino Light board/lightboard/lightboard.kicad_pcb and its schematic PCB/Arduino Light board/lightboard/lightboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lightboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask funeventsystems before reusing the design.
Similar boards
- 2 layers69.1 × 53.8 mm
Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers53.8 × 69.6 mm
EVSE V2 2
PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
32 parts50 - 2 layers113.7 × 61 mm
ArduTester SMD
jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4
17 parts14 - 4 layers65.9 × 52.9 mm
- 4 layers68.6 × 53.3 mm
101 PCB
ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.
89 parts10CC-BY-4.0 - 2 layers53.3 × 68.3 mm
