2 layers72 × 42 mm
NRF24 jammer
W0rthlessS0ul/nRF24_jammer
The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.
51 parts1kMIT
2 layers62.2 × 67.3 mm
Solartracker pcb
frodegill/SolarTrackerArduino code and PCB for a small solar tracker based on NTP and Linear Actuator with encoder
- Size
- 62.2 × 67.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 48
- Pads
- 86
- Tracks, vias
- 40, 4
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Dec 2023
- Updated
- 8 Dec 2023
Overview
Solartracker pcb is an open-source printed circuit board by frodegill, from the frodegill/SolarTracker repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 62.2 × 67.3 mm with 21 parts on 48 nets, routed with 40 tracks and 4 vias.
It is built around the BC817. Its parts include 9 connectors, 6 resistors, 2 diodes, 2 transistors and 2 switches.
Main components
1Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x02_Female | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2, J3, J4 |
| 2 | 1K | Resistor_SMD:R_1206_3216Metric | R1, R2 |
| 2 | 1M | Resistor_SMD:R_1206_3216Metric | R4, R6 |
| 2 | 300K | Resistor_SMD:R_1206_3216Metric | R3, R5 |
| 2 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Conn_01x02_Male | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J7, J8 |
| 2 | Conn_01x19_Female | Connector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_Vertical | J5, J6 |
| 2 | SANYOU_SRD_Form_C | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1, K2 |
| 2 | Zener | Diode_SMD:D_SMB | D1, D2 |
| 1 | Conn_01x04_Male | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | J9 |
Questions
How big is the Solartracker pcb PCB?
It measures 62.2 × 67.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Solartracker pcb use?
21 parts, built around the BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Solartracker pcb KiCad files?
From the frodegill/SolarTracker repository on GitHub, at the commit this page was made from: the board is solartracker_pcb/solartracker_pcb.kicad_pcb and its schematic solartracker_pcb/solartracker_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Solartracker pcb design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers271.8 × 114.3 mm
Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
426 parts282 - 2 layers65 × 56.5 mm
RPiG3iMac
qbancoffee/imac_g3_ivad_board_init
iMac G3 IVAD board initialization with an arduino
44 parts240LGPL-3.0 - 6 layers83.5 × 56 mm
- 2 layers87.9 × 98.7 mm
Bitdoglab smd
BitDogLab/BitDogLab
Open-source educational hardware for embedded systems, programming, electronics, and physical computing.
138 parts203 - 2 layers77 × 100 mm
- 2 layers84.2 × 52 mm
- 4 layers129 × 104.6 mm
