Skip to the content
2 layers61 × 20.3 mmSensorconnector pcb, the printed circuit board in 3D

Sensorconnector pcb

frodegill/Drivhus

Replacement for MiniDrivhus. This repository is for schematic for PCB and sourcecode for Arduino for a fullscale greenhouse irrigation system for up to 15 plants per Arduino

Size
61 × 20.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
8
Pads
37
Tracks, vias
59, 4
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
4 Nov 2023
Updated
21 Apr 2025

Overview

Sensorconnector pcb is an open-source printed circuit board by frodegill, from the frodegill/Drivhus repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 61 × 20.3 mm with 5 parts on 8 nets, routed with 59 tracks and 4 vias.

README

README.md

Drivhus

Replacement for MiniDrivhus. This repository is for schematic for PCB and sourcecode for Arduino for a fullscale greenhouse irrigation system for up to 15 plants per Arduino

Parts

5
QtyValueFootprintReferences
2Conn_01x05_PinConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ2, J4
2RJ45_ShieldedConnector_RJ:RJ45_Ninigi_GEJ1, J3
1Conn_01x03_PinTerminalBlock:TerminalBlock_bornier-3_P5.08mmJ5

More from frodegill/Drivhus

4
  • 4 layers142.5 × 125 mmDrivhus pcb, the printed circuit board in 3D

    Drivhus pcb

    frodegill/Drivhus

    Replacement for MiniDrivhus. This repository is for schematic for PCB and sourcecode for Arduino for a fullscale greenhouse irrigation system for up to 15 plants per Arduino

    109 partsGPL-3.0
  • 2 layers46 × 53 mmPumpconnector pcb, the printed circuit board in 3D

    Pumpconnector pcb

    frodegill/Drivhus

    Replacement for MiniDrivhus. This repository is for schematic for PCB and sourcecode for Arduino for a fullscale greenhouse irrigation system for up to 15 plants per Arduino

    5 partsGPL-3.0
  • 2 layers20.3 × 38.4 mmTemphumid pcb, the printed circuit board in 3D

    Temphumid pcb

    frodegill/Drivhus

    Replacement for MiniDrivhus. This repository is for schematic for PCB and sourcecode for Arduino for a fullscale greenhouse irrigation system for up to 15 plants per Arduino

    3 partsGPL-3.0
  • 2 layers25.4 × 48.3 mmWaterlevelconnector pcb, the printed circuit board in 3D

    Waterlevelconnector pcb

    frodegill/Drivhus

    Replacement for MiniDrivhus. This repository is for schematic for PCB and sourcecode for Arduino for a fullscale greenhouse irrigation system for up to 15 plants per Arduino

    3 partsGPL-3.0

Similar boards

  • 2 layers98 × 27 mmXy limit, the printed circuit board in 3D

    Xy limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    5 parts3.7k
  • 2 layers21 × 33 mm24g2usb pico2w, the printed circuit board in 3D

    24g2usb pico2w

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    5 parts1.7kApache-2.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers30 × 11 mmMain control board servo tester, the printed circuit board in 3D

    Main control board servo tester

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    5 parts1.1k
  • 2 layers78.8 × 35.3 mmKiCadTest, the printed circuit board in 3D

    KiCadTest

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    5 parts915
  • 2 layers50 × 23 mmMiniCircuits LTCC, the printed circuit board in 3D

    MiniCircuits LTCC

    VanceVagell/kv4p-ht

    Open source handheld ham radio project KV4P-HT

    5 parts828GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 light sensor, the printed circuit board in 3D

    L0 light sensor

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    5 parts546MIT

Questions

How big is the Sensorconnector pcb PCB?

It measures 61 × 20.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sensorconnector pcb use?

5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sensorconnector pcb KiCad files?

From the frodegill/Drivhus repository on GitHub, at the commit this page was made from: the board is sensorconnector_pcb/sensorconnector_pcb.kicad_pcb and its schematic drivhus_pcb/drivhus_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sensorconnector pcb design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).