2 layers46 × 53 mm
Pumpconnector pcb
frodegill/Drivhus
Replacement for MiniDrivhus. This repository is for schematic for PCB and sourcecode for Arduino for a fullscale greenhouse irrigation system for up to 15 plants per Arduino
5 partsGPL-3.0
4 layers142.5 × 125 mm
Drivhus pcb
frodegill/DrivhusReplacement for MiniDrivhus. This repository is for schematic for PCB and sourcecode for Arduino for a fullscale greenhouse irrigation system for up to 15 plants per Arduino
- Size
- 142.5 × 125 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 109
- Nets
- 131
- Pads
- 492
- Tracks, vias
- 783, 127
- Pours
- 21
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Nov 2023
- Updated
- 21 Apr 2025
Overview
Drivhus pcb is an open-source printed circuit board by frodegill, from the frodegill/Drivhus repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 142.5 × 125 mm with 109 parts on 131 nets, routed with 783 tracks and 127 vias.
It is built around the CD74HC4067M and BC817. Its parts include 39 resistors, 29 connectors, 18 diodes, 18 transistors and 3 switches. It belongs with the ESP32 boards of this library.
Main components
2
CD74HC4067M
SOIC-24-300mil-55℃~+125℃ 16 160Ω 16:1 22ns 2V~6V 345ns 365ns 89MHz Bidirectional analog channel、Glitch-free switching SOIC-24-300mil Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
README
README.mdDrivhus
Replacement for MiniDrivhus. This repository is for schematic for PCB and sourcecode for Arduino for a fullscale greenhouse irrigation system for up to 15 plants per Arduino
Parts
109| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | D | Diode_SMD:D_SMB | D1, D2, D3, D4, D5, D6, D7, D10, D11, D12, D13, D14, D15, D16, D17, D18 +2 |
| 17 | 10K | Resistor_SMD:R_1206_3216Metric | R3, R5, R7, R11, R13, R15, R17, R18, R19, R24, R26, R28, R30, R32, R34, R36 +1 |
| 15 | 470R | Resistor_SMD:R_1206_3216Metric | R4, R6, R8, R10, R12, R14, R16, R23, R25, R27, R29, R31, R33, R35, R37 |
| 4 | 1K | Resistor_SMD:R_1206_3216Metric | R20, R21, R22, R38 |
| 3 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q16, Q17, Q18 |
| 2 | CD74HC4067M | Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm | U1, U2 |
| 1 | +12V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | +5V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | -12V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | -5V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J19 |
| 1 | 1.8K | Resistor_SMD:R_1206_3216Metric | R39 |
| 1 | 12V Power connector | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J7 |
| 1 | 1M | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 300K | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 30N06L-1 | Package_TO_SOT_SMD:TO-252-2 | Q15 |
| 1 | 30N06L-10 | Package_TO_SOT_SMD:TO-252-2 | Q9 |
| 1 | 30N06L-11 | Package_TO_SOT_SMD:TO-252-2 | Q10 |
| 1 | 30N06L-12 | Package_TO_SOT_SMD:TO-252-2 | Q11 |
| 1 | 30N06L-13 | Package_TO_SOT_SMD:TO-252-2 | Q12 |
| 1 | 30N06L-14 | Package_TO_SOT_SMD:TO-252-2 | Q13 |
| 1 | 30N06L-15 | Package_TO_SOT_SMD:TO-252-2 | Q14 |
| 1 | 30N06L-2 | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | 30N06L-3 | Package_TO_SOT_SMD:TO-252-2 | Q2 |
| 1 | 30N06L-4 | Package_TO_SOT_SMD:TO-252-2 | Q3 |
| 1 | 30N06L-5 | Package_TO_SOT_SMD:TO-252-2 | Q4 |
| 1 | 30N06L-6 | Package_TO_SOT_SMD:TO-252-2 | Q5 |
| 1 | 30N06L-7 | Package_TO_SOT_SMD:TO-252-2 | Q6 |
| 1 | 30N06L-8 | Package_TO_SOT_SMD:TO-252-2 | Q7 |
| 1 | 30N06L-9 | Package_TO_SOT_SMD:TO-252-2 | Q8 |
| 1 | Conn_Coaxial_Power | CustomLibrary:BarrelJack_Wuerth_6941xx301002 | J5 |
| 1 | ESP32 Power side | Connector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_Vertical | J3 |
| 1 | ESP32 pin side | Connector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_Vertical | J1 |
| 1 | Fan | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J21 |
| 1 | Fan_+12V/+5V | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J27 |
| 1 | Fan_-12V/-5V | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J26 |
| 1 | Fan_relay | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K16 |
| 1 | Growlight In | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J18 |
| 1 | Growlight Out | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J23 |
| 1 | Growlight_+12V/+5V | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J28 |
| 1 | Growlight_-12V/-5V | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J24 |
| 1 | Growlight_relay | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K17 |
| 1 | Pump 1-4 | Connector_RJ:RJ45_Ninigi_GE | J13 |
| 1 | Pump 13-15 | Connector_RJ:RJ45_Ninigi_GE | J16 |
| 1 | Pump 5-8 | Connector_RJ:RJ45_Ninigi_GE | J14 |
| 1 | Pump 9-12 | Connector_RJ:RJ45_Ninigi_GE | J15 |
| 1 | Sensor 1-5 | Connector_RJ:RJ45_Ninigi_GE | J4 |
| 1 | Sensor 11-15 | Connector_RJ:RJ45_Ninigi_GE | J33 |
| 1 | Sensor 6-10 | Connector_RJ:RJ45_Ninigi_GE | J10 |
| 1 | Setup | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J22 |
| 1 | Temp/Humid Outdoors | Connector_RJ:RJ45_Ninigi_GE | J12 |
| 1 | Temp/Humid/Light Indoors | Connector_RJ:RJ45_Ninigi_GE | J11 |
| 1 | Water valve | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J2 |
| 1 | Waterlevel | Connector_RJ:RJ45_Ninigi_GE | J17 |
| 1 | Waterpump_+12V/+5V | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J25 |
| 1 | Waterpump_-12V/-5V | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J34 |
| 1 | Watervalve_relay | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K18 |
More from frodegill/Drivhus
4- 2 layers61 × 20.3 mm
Sensorconnector pcb
frodegill/Drivhus
Replacement for MiniDrivhus. This repository is for schematic for PCB and sourcecode for Arduino for a fullscale greenhouse irrigation system for up to 15 plants per Arduino
5 partsGPL-3.0 - 2 layers20.3 × 38.4 mm
Temphumid pcb
frodegill/Drivhus
Replacement for MiniDrivhus. This repository is for schematic for PCB and sourcecode for Arduino for a fullscale greenhouse irrigation system for up to 15 plants per Arduino
3 partsGPL-3.0 - 2 layers25.4 × 48.3 mm
Waterlevelconnector pcb
frodegill/Drivhus
Replacement for MiniDrivhus. This repository is for schematic for PCB and sourcecode for Arduino for a fullscale greenhouse irrigation system for up to 15 plants per Arduino
3 partsGPL-3.0
Similar boards
- 2 layers312 × 140 mm
- 2 layers422.4 × 118.2 mm
MidiMood (tht)
silveirago/MidiMood
This repository contains the code for a custom MIDI controller project called MidiMood, built using an ATmega32U4 microcontroller (or similar).
53 parts82 - 2 layers248.9 × 120.7 mm
16nx
16n-faderbank/16nx
16nx is a controller for musical instruments. Sixteen faders,MIDI over USB and jack, CV out, and I2C out. Based around RP2040.
171 parts76 - 4 layers100 × 100 mm
OPDM
brenonsantos/OpenPDM
OpenPDM is an open-source programable Power Distribution Module for your car
156 parts75MIT - 2 layers215.9 × 101.6 mm
- 2 layers152.4 × 95.3 mm
- 2 layers100 × 100 mm
Eavesdrum module
tobigun/EavesDrum
EavesDrum is an e-drum trigger module project, designed for musicians and makers. It allows you to connect drum pads or piezo triggers and converts their signals into MIDI events.
103 parts25GPL-3.0 - 4 layers33 × 65.5 mm
OM FlexGrid Rigid PCB
Open-Muscle/OpenMuscle-FlexGrid
60-sensor wearable with flexible PCB and pressure matrix
65 parts19CERN-OHL-S-2.0
Questions
How big is the Drivhus pcb PCB?
It measures 142.5 × 125 mm and has 4 copper layers, 4.69 mm thick.
What parts does the Drivhus pcb use?
109 parts, built around the CD74HC4067M and BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Drivhus pcb KiCad files?
From the frodegill/Drivhus repository on GitHub, at the commit this page was made from: the board is drivhus_pcb/drivhus_pcb.kicad_pcb and its schematic drivhus_pcb/drivhus_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Drivhus pcb design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).