4 layers90 × 110 mm
2 layers25.4 × 45.7 mm
TP5410 eval board — копия
Freimor/HRDW-EVALBunch of evaluation boards
- Size
- 25.4 × 45.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 29
- Pads
- 128
- Tracks, vias
- 221, 70
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Mar 2025
- Updated
- 4 Apr 2026
Overview
TP5410 eval board — копия is an open-source printed circuit board by Freimor, from the Freimor/HRDW-EVAL repository on GitHub. It is a 2-layer board of 25.4 × 45.7 mm with 48 parts on 29 nets, routed with 221 tracks and 70 vias.
It is built around the 74LVC2G17GW, 74LVC1G80GW and TP5410, with the SMF6V0A, AO3415 and CBM321609U301T among its other parts. Its parts include 14 capacitors, 8 resistors, 7 diodes, 6 connectors and 3 ICs.
Main components
8
74LVC2G17GW
SOT-363-40℃~+125℃ 1 1.65V~5.5V 10uA 2 24mA 24mA 5.4ns@3.3V,50pF 74LVC Schmitt trigger Unidirectional SOT-363 Buffers, Drivers, Receivers, Transceivers ROHSTECH PUBLICBuffers, Drivers, Receivers, Transceivers
74LVC1G80GW
SOT-353-5-40℃~+125℃ 1 1.1ns 1.65V~5.5V 1.8ns@5V,50pF 100nA 200MHz 24mA 24mA 500ps 5pF 74LVC Series D-Type Rising Edge SOT-353-5 Flip Flops ROHSNexperiaFlip FlopsTP5410
SOIC-8-EP1.2A 4V~10V SOIC-8-EP Power Management - Specialized ROHSTOPPOWERPMIC - Battery Management
SMF6V0A
SOD-123SOD-123 ESD and Surge Protection (TVS/ESD) ROHSFUXINSEMIUncategorised
AO3415
SOT-23-55℃~+150℃ 1 P-Channel 1.2W 1.45nF 160pF 17.2nC@4.5V 1V 205pF 20V 4A 50mΩ@4.5V P-Channel SOT-23 MOSFETs ROHSGOODWORKMOSFETs
CBM321609U301T
12061 300Ω@100MHz ±25% 1206 Ferrite Beads ROHSGuangdong Fenghua Advanced Tech (FH)Ferrite Beads
MH2029-300Y
0805-55℃~+125℃ 1 30Ω@100MHz 3A 3mΩ ±25% 0805 Ferrite Beads ROHSBournsFerrite Beads
SS32
SMA(DO-214AC)-55℃~+125℃ 20V 3A 500uA@20V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdHRDW-EVAL
Bunch of evaluation boards
Design rules for evaluation board:
- Size and pinheader placement defined by breadboard topology
- Silkscreen standart (Name, short description, date format Q1.25)
- Mask color standart (black for final device, white for student's education, red for sensor boards, blue for microcontroller boards, green for other)
- Excessive testpad using, hooks for oscilloscope
- Special via condition (do not use directly on pads. Every signal line through traces)
- Marked resistor only (Except for hard defined)
- All footprints for hand soldering
- Excessive silkscreen marking
- GIT repo address placement required
- All signals on external layers
На русском
- Разрабатываем под установку на макетную плату (так что бы вставала посередине)
- Стандарт маркировки (Наименование, краткий description, дата в формате Q1.25)
- Стандарт по цветам маски (черный под конечное устройство, белый под обучение студентов, красный под сенсор, синий микроконтроллер, зеленый под все остальное)
- Использовать тестпады, зацепы под осциллограф
- Спец условия по расположению via's (не использовать на падах - на удалении. Любой сигнал - через дорожку)
- Резисторы с маркировкой (кроме жестко детерминированных)
- Все посадочные - под ручную пайку
- Развернутая маркировка по возможности
- Указание репозитория на печатной плате
- Все сигналы - на внешних слоях
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C5, C7, C11, C12, C13 |
| 4 | 1.3k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R6, R8 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C9 |
| 2 | 47uF Tantal | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C8, C10 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2 |
| 2 | GND | _basic:Castellated_hole_2.54 | J4, J5 |
| 2 | SMF6V0A | Diode_SMD:D_SOD-123F | D1, D6 |
| 1 | 0.3 | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R5 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 5v | _basic:Test_Ring_TH | TP2 |
| 1 | 74LVC1G80 | _basic:74LVC1G80 | U3 |
| 1 | 74LVC2G17 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U2 |
| 1 | AO3415 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Battery | _basic:Test_Ring_TH | TP3 |
| 1 | Battery | _conn:Conn_XH_JSTlike_2pin_X8821WRS-02-9TSN | BT1 |
| 1 | CBM321609U301T | Inductor_SMD:L_1206_3216Metric_Pad1.22x1.90mm_HandSolder | FB2 |
| 1 | CHRG | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | GND | _basic:Test_Ring_TH | TP1 |
| 1 | MH2029-300Y | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB1 |
| 1 | OUT | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D7 |
| 1 | PWRON | _buttons:SW_SMD_PAN_EVPAS | SW1 |
| 1 | PWR_Out | _conn:Conn_XH_JSTlike_2pin_X8821WRS-02-9TSN | J6 |
| 1 | SPM5020T-100M-LR 10uH | _basic:INDUCTOR_SPM5020T | L1 |
| 1 | SS32 | Diode_SMD:D_SMA | D2 |
| 1 | SS32 | Diode_SMD:D_SMA-SMB_Universal_Handsoldering | D5 |
| 1 | STDBY | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | TP5410 | _chips:TP5410 | U1 |
| 1 | USB_C_Receptacle_USB2.0 | _usb:RUICHI_TYPE-C-16PF-020 | J1 |
| 1 | Val** | _graphic:graphic | Ref** |
| 1 | Vin | _basic:Castellated_hole_2.54 | J2 |
| 1 | Vout | _basic:Castellated_hole_2.54 | J3 |
Questions
How big is the TP5410 eval board — копия PCB?
It measures 25.4 × 45.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TP5410 eval board — копия use?
48 parts, built around the 74LVC2G17GW, 74LVC1G80GW, TP5410 and SMF6V0A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TP5410 eval board — копия KiCad files?
From the Freimor/HRDW-EVAL repository on GitHub, at the commit this page was made from: the board is TP5410_eval_board/TP5410_eval_board — копия.kicad_pcb and its schematic TP5100_eval_board/TP5100_eval_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TP5410 eval board — копия design in my own project?
Its repository states no licence, so its author keeps all rights: ask Freimor before reusing the design.
Similar boards
- 2 layers30 × 25 mm
- 2 layers44 × 44 mm
Esp32 button
ep-infosec/50_google_makerspace-partsbin
This is a single-button (with some IOs broken out) that can use deep sleep or fully turn off in between uses.
61 partsCC-BY-4.0 - 4 layers40 × 40 mm
Pre filter
dfdtc/RMUC2026_RF
This is the pubilc repository of BNBU 2026 RMUC RF part of Radar
23 parts14GPL-3.0 - 2 layers71.3 × 41.7 mm
- 2 layers127.2 × 76.1 mm
- 4 layers43 × 39.2 mm
StepperMotorDriver
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
66 parts915 - 6 layers64 × 90 mm
Urti mainboard
greatscottgadgets/urti-mainboard
Mainboard of URTI, the Universal Radio Test Instrument
468 parts29CERN-OHL-P-2.0