Skip to the content
2 layers76.2 × 95.2 mmIncrementer, the printed circuit board in 3D

Further Adventures in Electronics

Size
76.2 × 95.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
43
Nets
80
Pads
220
Tracks, vias
441, 147
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
15 Sep 2024
Updated
25 Oct 2026

Overview

Incrementer is an open-source printed circuit board by freesurfer-rge, from the freesurfer-rge/slothpu16 repository on GitHub, published under the MIT licence. It is a 2-layer board of 76.2 × 95.2 mm with 43 parts on 80 nets, routed with 441 tracks and 147 vias.

It is built around the 74HC245D and 74HC283P-E. Its parts include 16 resistors, 16 diodes, 6 ICs, 4 capacitors and 1 connector.

Main components

2

README

README.md

slothpu16

This is a major revision of an earlier project to build a computer from 7400-series logic. This implements a simple 16-bit CPU with a load/store architecture.

Parts

43
QtyValueFootprintReferences
164.7kResistor_SMD:R_0603_1608MetricR201, R202, R203, R204, R205, R206, R207, R208, R301, R302, R303, R304, R305, R306, R307, R308
16LEDLED_SMD:LED_0603_1608MetricD201, D202, D203, D204, D205, D206, D207, D208, D301, D302, D303, D304, D305, D306, D307, D308
474HC283Package_DIP:DIP-16_W7.62mm_SocketU201, U203, U301, U303
4CCapacitor_SMD:C_0603_1608MetricC201, C202, C301, C302
274HC245Package_SO:SOIC-20W_7.5x12.8mm_P1.27mmU202, U302
1~BoardEdgeConnectors:TE-5530843-4-EdgeJ101

More from freesurfer-rge/slothpu16

12
  • 2 layers254 × 110.5 mmRegister File, the printed circuit board in 3D

    Register File

    freesurfer-rge/slothpu16

    Further Adventures in Electronics

    224 partsMIT
  • 2 layers228.6 × 177.8 mmPi Backplane Connector, the printed circuit board in 3D

    Pi Backplane Connector

    freesurfer-rge/slothpu16

    Further Adventures in Electronics

    217 partsMIT
  • 2 layers236.2 × 205.7 mmRegister File Carrier, the printed circuit board in 3D

    Register File Carrier

    freesurfer-rge/slothpu16

    Further Adventures in Electronics

    98 partsMIT
  • 2 layers72.4 × 96.5 mmRegister with Reset, the printed circuit board in 3D

    Register with Reset

    freesurfer-rge/slothpu16

    Further Adventures in Electronics

    72 partsMIT
  • 2 layers177.8 × 241.3 mmALU Carrier, the printed circuit board in 3D

    ALU Carrier

    freesurfer-rge/slothpu16

    Further Adventures in Electronics

    69 partsMIT
  • 2 layers167.6 × 175.3 mmProgram Counter, the printed circuit board in 3D

    Program Counter

    freesurfer-rge/slothpu16

    Further Adventures in Electronics

    68 partsMIT
  • 2 layers127 × 152.4 mmInstruction Register, the printed circuit board in 3D

    Instruction Register

    freesurfer-rge/slothpu16

    Further Adventures in Electronics

    42 partsMIT
  • 2 layers141 × 100.3 mmBarrel Shifter, the printed circuit board in 3D

    Barrel Shifter

    freesurfer-rge/slothpu16

    Further Adventures in Electronics

    35 partsMIT
  • 2 layers85.1 × 109.2 mmNAND XOR, the printed circuit board in 3D

    NAND XOR

    freesurfer-rge/slothpu16

    Further Adventures in Electronics

    17 partsMIT
  • 2 layers182.9 × 195.6 mmSlothPU Backplane, the printed circuit board in 3D

    SlothPU Backplane

    freesurfer-rge/slothpu16

    Further Adventures in Electronics

    16 partsMIT
  • 2 layers66 × 76.2 mmAdder Subtractor, the printed circuit board in 3D

    Adder Subtractor

    freesurfer-rge/slothpu16

    Further Adventures in Electronics

    13 partsMIT
  • 2 layers59.7 × 104.1 mmComparator, the printed circuit board in 3D

    Comparator

    freesurfer-rge/slothpu16

    Further Adventures in Electronics

    12 partsMIT

Similar boards

  • 2 layers245.1 × 160 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64x4-Home-Computer

    My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

    139 parts326
  • 2 layers191.8 × 121.3 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-1-2

    Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed

    109 parts184
  • 2 layers306.1 × 130.2 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64-Home-Computer

    Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64

    132 parts94
  • 2 layers208.9 × 170.8 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-3

    Version 3 of my educational DIY TTL computer built around a UART serial interface - now with blinkenlights!

    207 parts54
  • 2 layers208 × 110 mm8 16 computer 2, the printed circuit board in 3D

    8 16 computer 2

    halfburnttoast/TCPU816-v1

    Version 1.1 of my 8-bit, TTL computer.

    120 parts21
  • 2 layers178 × 711 mmMSAP-2 rev.A SMD, the printed circuit board in 3D

    MSAP-2 rev.A SMD

    mehrantsi/MSAP-2

    An 8-bit computer. Successor to MSAP-1

    658 parts13MIT
  • 4 layersSC08v2, the printed circuit board in 3D

    SC08v2

    lonyelon/SC08v2

    Sergio's Simple Computer (8bit, version 2)

    116 parts3GPL-3.0
  • 2 layers180.3 × 112.4 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slowcorners/Minimal-UART-CPU-Dev

    89 parts

Questions

How big is the Incrementer PCB?

It measures 76.2 × 95.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Incrementer use?

43 parts, built around the 74HC245D and 74HC283P-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Incrementer KiCad files?

From the freesurfer-rge/slothpu16 repository on GitHub, at the commit this page was made from: the board is pcbs/Incrementer/Incrementer.kicad_pcb and its schematic pcbs/ALU Carrier/ALU Carrier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Incrementer design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).