Skip to the content
4 layers34 × 26 mmCamera, the printed circuit board in 3D

for cad stuff

Size
34 × 26 mm
Copper layers
4
Thickness
0.4 mm
Parts
119
Nets
69
Pads
439
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 10.0 (file 20260206)
Created
13 Oct 2026
Updated
7 Nov 2026

Overview

Camera is an open-source printed circuit board by freemocap, from the freemocap/skellycad repository on GitHub, published under the AGPL-3.0 licence. It is a 4-layer board of 34 × 26 mm with 119 parts on 69 nets.

It is built around the USBLC6-2P6 and PMZB200UNEYL. Its parts include 65 capacitors, 28 resistors, 8 ICs, 3 connectors and 3 inductors. It belongs with the ESP32 and RISC-V boards of this library.

Main components

2

README

designs/cameras/ov9281/history/electronics/r008/README.md

R08 routing and firmware assembly variant

R08 adds 16 verified paths and seven through vias to R07, preserving all earlier placements, pads and copper. Nine more unconnected items are resolved: the controller falls from 37 to 34 and the head from 29 to 23. The flex remains fully connected. R08 is a checked draft with 57 unconnected items, not a fabrication release.

The sensor address population now has R7 absent and R8 populated with 0 ohm. This selects SID low and matches the firmware driver's 7-bit address 0x60 [@espressifOv9281Driver]. Schematic and PCB population attributes were checked; the electrical netlist is otherwise identical to R07.

Open OV9281-P4-R08-assembly.kicad_pcb for the combined inspection view. The three manufacturing designs remain separate: controller.kicad_pcb, head.kicad_pcb, and flex-study.kicad_pcb. The combined file is not a fab input. Native STEP exports show substrates and copper only; components and optics are not represented as validated mechanical bodies.

Verified scope

  • All 456 schematic-to-board pad nets match; 24 flex paths and their flat XY interface positions match. These checks do not qualify connector mating height.
  • All existing copper and placements remain; every added segment and via matches routing-r08.json. Every added path reaches its declared endpoints.
  • No net loses connectivity. No shorts, spacing errors or copper slivers occur under the saved draft rules. Six open tracks and seven incomplete vias still produce warnings. DRC is not clean for fabrication.
  • ERC reports zero messages under the inherited settings; ignored categories remain visible in checks/erc.rpt.
  • Rigid stackups remain 0.6 mm and the flex 0.1 mm. Trace impedance, current capacity, manufacturing process and assembled fit are unqualified.

The new head paths can use 0.10 mm widths with 0.15 mm spacing. The earlier R07 4 mm local-escape restriction does not describe every R08 route; inspect the recorded lengths and layers. No MIPI or USB differential-pair routing was added. The router trial's unused escape vias and copper-sliver-producing additions were discarded before this revision was selected.

inventory.json lists 103 native footprints with values, available MPN fields, population, sides and placements. It is a review inventory, not an approved BOM. J104 remains a schematic reservation, not a built LED driver. Y1's inherited 3.3 V part description conflicts with its +1V8 supply; exact part and land pattern review are required. The reference design's reuse license does not establish that every inherited component choice is correct for this adaptation.

Reproduce

Use KiCad 10's bundled Python from the repository root. Choose unused output directories; the scripts refuse to overwrite a previous experiment.

powershell
& 'C:/Users/jonma/AppData/Local/Programs/KiCad/10.0/bin/python.exe' designs/eye-camera-ov9281/build_r08.py --output generated/r08-trial-new
& 'C:/Users/jonma/AppData/Local/Programs/KiCad/10.0/bin/python.exe' designs/eye-camera-ov9281/refine_r08.py --input generated/r08-trial-new --output generated/r08-refined-new
& 'C:/Users/jonma/AppData/Local/Programs/KiCad/10.0/bin/python.exe' designs/eye-camera-ov9281/validate_r06.py --directory generated/r08-refined-new --parent designs/eye-camera-ov9281/electronics/r07 --revision OV9281-P4-R08

The refinement retains a reviewed subset of nets. KiCad object UUIDs and route choices can differ between runs. A replay must pass native validation before selection; the current checkpoint is identified by validation.json hashes. The validator writes review artifacts, so run it on a new experiment rather than on an accepted checkpoint. Read ../../firmware/README.md for software builds and ../../STATUS.md for remaining release gates.

Parts

119
QtyValueFootprintReferences
26100nCamera:C_0402_1005MetricC103, C110, C111, C112, C113, C114, C115, C116, C117, C118, C119, C120, C121, C122, C128, C129 +10
101uCamera:C_0603_1608MetricC104, C125, C126, C127, C133, C604, C609, C615, C628, C629
910kCamera:R_0402_1005MetricR101, R102, R103, R104, R605, R609, R610, R612, R615
94.7uCamera:C_0603_1608MetricC105, C108, C136, C601, C602, C617, C619, C621, C623
710nCamera:C_0402_1005MetricC131, C134, C605, C608, C610, C613, C616
6100kCamera:R_0402_1005MetricR108, R601, R602, R604, R613, R614
522uCamera:C_0805_2012MetricC106, C109, C123, C124, C603
310uCamera:C_0805_2012MetricC606, C611, C614
3120R@100MHzCamera:L_0603_1608MetricFB601, FB602, FB603
32.2u / 3.3 A IsatCamera:Murata_DFE252012F_R11L101, L102, L302
34.7kCamera:R_0402_1005MetricR113, R115, R608
3TLV62569DRLRCamera:TI_DRL0006A_R11U103, U104, U302
20Camera:R_0402_1005MetricR109, R110
2100n/50VCamera:C_0402_1005MetricC625, C626
216pCamera:C_0402_1005MetricC101, C102
2499kCamera:R_0402_1005MetricR105, R106
2PMZB200UNECamera:SOT-883Q301, Q302
2TPD1E01B04 / 0.20pF typCamera:D_0402_1005MetricD301, D302
1200kCamera:R_0402_1005MetricR603
122pCamera:C_0402_1005MetricC107
14.02kCamera:R_0402_1005MetricR111
140 MHz / CL 10pFCamera:ECS_ECX1637B2_R11Y101
1453kCamera:R_0402_1005MetricR107
178.7kCamera:R_0402_1005MetricR606
180.6kCamera:R_0402_1005MetricR611
197.6kCamera:R_0402_1005MetricR607
1DS90UB954-Q1 / internal LDOsCamera:TI_RGZ0048B_E01U301
1ESP32-P4NRW16X / v3.xCamera:ESP32-P4U101
1POWER RETURNCamera:TestPoint_Pad_1.0x1.0mmTP303
1PROGRAM / RESET padsCamera:ProgrammingPads_5x1mm_P1.5mmJ103
1REGULATED 5V INPUTCamera:TestPoint_Pad_1.0x1.0mmTP302
1SG-210STF 25.0000ML / 1.8VCamera:Epson_SG210STF_2.5x2.0mm_R09Y301
1TETHER: 1=5V 2=N 3=P 4=GND; NOT USBCamera:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_HorizontalJ301
1TPS2553 / current-limited head powerCamera:TI_DRV0006A_E01U303
1Tether shieldCamera:TestPoint_Pad_1.0x1.0mmTP301
1USB / JST SH / 1VBUS 2DM 3DP 4GNDCamera:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_HorizontalJ101
1USBLC6-2P6Camera:SOT-666U105
1W25Q32JVUUIQ / 4 MBCamera:Winbond_USON-8-2EP_3x4mm_P0.8mm_EP0.2x0.8mmU102

More from freemocap/skellycad

12
  • 6 layers74.9 × 14 mmCamera, the printed circuit board in 3D

    Camera

    freemocap/skellycad

    for cad stuff

    106 partsAGPL-3.0
  • 6 layers32 × 20 mmController, the printed circuit board in 3D

    Controller

    freemocap/skellycad

    for cad stuff

    77 partsAGPL-3.0
  • 4 layers65 × 14 mmCamera, the printed circuit board in 3D

    Camera

    freemocap/skellycad

    for cad stuff

    77 partsAGPL-3.0
  • 4 layers14 × 14 mmHead, the printed circuit board in 3D

    Head

    freemocap/skellycad

    for cad stuff

    31 partsAGPL-3.0
  • 4 layers14 × 14 mmHead, the printed circuit board in 3D

    Head

    freemocap/skellycad

    for cad stuff

    23 partsAGPL-3.0
  • 2 layers30 × 34 mmCamera interface, the printed circuit board in 3D

    Camera interface

    freemocap/skellycad

    for cad stuff

    6 partsAGPL-3.0
  • 2 layers35.3 × 12.5 mmAUDIT flex study, the printed circuit board in 3D

    AUDIT flex study

    freemocap/skellycad

    for cad stuff

    2 partsAGPL-3.0
  • 2 layers35.3 × 12.5 mmFlex study, the printed circuit board in 3D

    Flex study

    freemocap/skellycad

    for cad stuff

    2 partsAGPL-3.0
  • 2 layers35.3 × 12.5 mmFlex study, the printed circuit board in 3D

    Flex study

    freemocap/skellycad

    for cad stuff

    2 partsAGPL-3.0
  • 2 layers35.3 × 12.5 mmFlex study, the printed circuit board in 3D

    Flex study

    freemocap/skellycad

    for cad stuff

    2 partsAGPL-3.0

Similar boards

  • 6 layers14 × 8 mmD20, the printed circuit board in 3D

    D20

    git4dcc/RTB_D20

    DCC / Railcom decoder (NEM651, double sided)

    51 parts1Apache-2.0
  • 6 layers15.2 × 9.5 mmD21, the printed circuit board in 3D

    D21

    git4dcc/RTB_D21

    DCC / Railcom decoder (Next18, double sided)

    48 parts1Apache-2.0
  • 6 layers15.3 × 11.4 mmD22, the printed circuit board in 3D

    D22

    git4dcc/RTB_D22

    DCC / Railcom decoder (Plux16, double sided)

    48 parts1Apache-2.0
  • 4 layers50.9 × 15.5 mmD12, the printed circuit board in 3D

    D12

    git4dcc/RTB_D12

    DCC Railcom Decoder FLM V100

    72 partsApache-2.0
  • 4 layers76 × 11 mmD15, the printed circuit board in 3D

    D15

    git4dcc/RTB_D15

    Minitrix V160 N-Scale Locomotive Decoder (DCC/RailCom)

    83 partsApache-2.0
  • 6 layers17 × 10.9 mmD24, the printed circuit board in 3D

    D24

    git4dcc/RTB_D24

    DCC / Railcom decoder (NEM651, single sided), WS28xx

    53 partsApache-2.0
  • 4 layers48 × 35 mmMinimal, the printed circuit board in 3D

    Minimal

    torvalds/GuitarPedal

    Linus learns analog circuits

    114 parts2.5kGPL-2.0
  • 4 layers180.8 × 300.3 mmDilemma, the printed circuit board in 3D

    Dilemma

    Bastardkb/Dilemma

    The Dilemma is a vertical stagger low-profile keyboard with mods.

    383 parts590

Questions

How big is the Camera PCB?

It measures 34 × 26 mm and has 4 copper layers, 0.4 mm thick.

What parts does the Camera use?

119 parts, built around the USBLC6-2P6 and PMZB200UNEYL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Camera KiCad files?

From the freemocap/skellycad repository on GitHub, at the commit this page was made from: the board is designs/cameras/ov9281/variants/three-board/checkpoints/e001-connected-draft/base/camera.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Camera design in my own project?

Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).