Skip to the content
2 layers107.2 × 60.3 mmClass D Audio Amplifier, the printed circuit board in 3D

Class D Audio Amplifier

fredie1811/Class-D-Amplifier

The KiCad Schematic and PCB Layout for a Half Bridge Class-D Audio Amplifier using an MH-M28 for inputting the audio via an audio jack or via bluetooth.

Size
107.2 × 60.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
35
Nets
26
Pads
114
Tracks, vias
132, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
14 Jul 2025
Updated
14 Jul 2025

Overview

Class D Audio Amplifier is an open-source printed circuit board by fredie1811, from the fredie1811/Class-D-Amplifier repository on GitHub. It is a 2-layer board of 107.2 × 60.3 mm with 35 parts on 26 nets, routed with 132 tracks and 0 vias.

It is built around the IR2113S, 74HC04D and LM393, with the UF5408 and IRLZ44N among its other parts. Its parts include 12 capacitors, 7 resistors, 7 ICs, 3 diodes and 2 transistors. It belongs with the audio and music and radio and wireless boards of this library.

Main components

5

README

README.md

Class D Audio Amplifier

This project involves the design and implementation of a 2-layer PCB for a Class D audio amplifier using a half-bridge topology and integrated Bluetooth streaming via the MHM-28 module. The amplifier is capable of driving a speaker with high efficiency using Pulse Width Modulation (PWM), with clean audio recovery using an LC filter.

🔧 Features

  • Class D half-bridge topology for efficient audio amplification
  • Bluetooth audio streaming using MHM-28 module
  • PWM generation with TLC555 timer
  • Signal conditioning and dead-time control using LM393 and 74HC04
  • Gate driving with IRS2113 for high-side and low-side MOSFET control
  • LC filter output for analog audio reconstruction
  • 2-layer PCB designed in KiCad

📐 System Architecture

ModuleDescription
TLC555 TimerTriangle waveform generator for PWM modulation
LM393 ComparatorConverts audio to PWM by comparing input with reference
IRS2113High/low-side MOSFET driver for half-bridge control
IRLZ44N MOSFETsPower stage switches
LC FilterReconstructs analog signal from PWM output
MHM-28 ModuleBluetooth V4.0 A2DP module for wireless audio
LM7805 / LM7812Linear regulators for 5V and 12V power rails

📊 Technical Specifications

ParameterValue
Supply Voltage12V
PWM Frequency~200 kHz
LC Filter Cutoff~38.6 kHz
Output Power~10–20 W
Efficiency>90%
PCB Size2-layer board
Bluetooth SupportYes (MHM-28, stereo input)

🔋 Power Supply

  • LM7805: 5V logic rail
  • LM7812: 12V gate driver rail
  • Capacitive decoupling at regulator input/output

📡 Bluetooth Audio Interface

The MHM-28 module supports:

  • Bluetooth V4.0 with A2DP
  • Stereo analog output
  • Easy pin-header integration
  • Direct input to comparator stage

🎯 Applications

  • Portable wireless audio systems
  • DIY speaker projects
  • Embedded systems with audio output
  • Energy-efficient signal amplification

🧠 Learnings

  • Class D amplifier design theory
  • PWM signal processing and dead-time logic
  • High-frequency PCB layout techniques
  • Filter design and frequency response analysis
  • Bluetooth module integration

Parts

35
QtyValueFootprintReferences
50.22uFCapacitor_THT:C_Rect_L26.5mm_W10.5mm_P22.50mm_MKS4C8, C9, C10, C11, C12
410kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1, R2, R6, R7
3UF5408Diode_THT:D_DO-201AD_P15.24mm_HorizontalD1, D2, D3
210Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR4, R5
2220nFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC3, C6
233uHInductor_THT:L_Radial_D8.7mm_P5.00mm_Fastron_07HCPL1, L2
247UCapacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mmC1, C4
2IRLZ44NPackage_TO_SOT_THT:TO-220-3_VerticalQ1, Q2
2Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ2, J3
11nFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC5
122uCapacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mmC7
147uCapacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mmC2
174HC04Class D Amplifier Pain:74HC04U3
1IR2113Package_DIP:DIP-14_W7.62mmU4
1LM393Class D Amplifier Pain:DIP794W45P254L959H508Q8U1
1LM7805_TO220Package_TO_SOT_THT:TO-220-3_VerticalU5
1LM7812_TO220Package_TO_SOT_THT:TO-220-3_VerticalU6
1MH-M28Class D Amplifier Pain:MH-M28U7
1RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR3
1TLC555xPPackage_DIP:DIP-8_W7.62mmU2

Similar boards

  • 2 layers98.2 × 47.9 mmOscBoardV12, the printed circuit board in 3D

    OscBoardV12

    shreya2717/Solar-Rooftop-Financing-Market-Risk-Analysis

    Solar energy is the cleanest and most available renewable energy source. The Modern technology can harness this energy for a variety of uses, including producing electricity, providing light and heating water for…

    114 parts
  • 2 layers100 × 100 mmGateDriver, the printed circuit board in 3D

    GateDriver

    christopherwj/SDG3

    A place for all of our files related to our project

    73 parts1
  • 4 layers85 × 48 mmClass DAmp, the printed circuit board in 3D

    Class DAmp

    Shift-delete0/Class_D_Amplifier

    This is my project in which i have made a class D amplifier from scratch. I did this to challenge myself and learn more about analog electronics and amplifier.

    32 parts
  • 2 layers273.1 × 186.1 mmIon pump controller, the printed circuit board in 3D

    Ion pump controller

    AlexW-proj/ion-pump-controller

    open source controller that takes 24V in and spits out 0 - 7000V, set by a knob with an adjustable ramp time

    63 parts2
  • 2 layersGB2, the printed circuit board in 3D

    GB2

    Andy18650/GB2-2025-team4

    GitHub repository for Cambridge University Engineering part IIA project GB2: Electrical Power, Team 4

    167 partsGPL-3.0
  • 2 layers123.2 × 127 mmProjeto rounded, the printed circuit board in 3D

    Projeto rounded

    Guilherme32/controle-forno-LITel

    Esse repositório guarda o que foi desenvolvido para o controle do forno do Laboratório de Instrumentação e Telemetria da UFJF (LITel)

    57 parts
  • 2 layers99.1 × 89.8 mmCm4io radxa hat, the printed circuit board in 3D

    Cm4io radxa hat

    hpeyerl/evj55

    Files related to my EV conversion project.

    78 partsBSD-2-Clause

Questions

How big is the Class D Audio Amplifier PCB?

It measures 107.2 × 60.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Class D Audio Amplifier use?

35 parts, built around the IR2113S, 74HC04D, LM393 and UF5408. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Class D Audio Amplifier KiCad files?

From the fredie1811/Class-D-Amplifier repository on GitHub, at the commit this page was made from: the board is Class D Audio Amplifier.Kicad.pro/Class D Audio Amplifier.kicad_pcb and its schematic Class D Audio Amplifier.Kicad.pro/Class D Amplifier/Class D Audio Amplifier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Class D Audio Amplifier design in my own project?

Its repository states no licence, so its author keeps all rights: ask fredie1811 before reusing the design.