Skip to the content
2 layersPico ice bot v1, the printed circuit board in 3D

Pico ice bot v1

fred-corp/pico-ice-bot

A simple robot chassis bot for the Pico-ICE FPGA dev board.

Copper layers
2
Thickness
1.6 mm
Parts
24
Nets
42
Pads
118
Tracks, vias
51, 16
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
14 Apr 2025
Updated
23 Apr 2025

Overview

Pico ice bot v1 is an open-source printed circuit board by fred-corp, from the fred-corp/pico-ice-bot repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board with 24 parts on 42 nets, routed with 51 tracks and 16 vias.

It is built around the 06035G104ZAT2A, 12BHC186P1-GR and KDV12FR180ET, with the 2M1-T2-3 and 742X083101JP among its other parts. Its parts include 6 capacitors, 5 resistors, 4 ICs, 4 connectors and 1 switch. It belongs with the RP2040 boards of this library.

Main components

5

README

README.md

Pico ICE Bot

A simple robot chassis bot for the Pico-ICE FPGA dev board.

License & Acknowledgements

Made with ❤️, lots of ☕️, and lack of 🛌
Published under CreativeCommons BY-SA 4.0

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Parts

24
QtyValueFootprintReferences
306035G104ZAT2ACapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2, C3, C5
312BHC186P1-GRBatteries:12BHC186P1GRB1, B2, B3
3CL10A106MA8NRNCCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C4, C6
3R_USResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3, R4, R5
2KDV12FR180ETResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1, R2
12M1-T2-3Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW1
1742X083101JPResistor_SMD:R_Array_Concave_4x0603RN1
1Conn_01x04_SocketConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1DRV8411RTERDRV8411:QFN50P300X300X80-17N-DU2
1LD1117S33TR_SOT223Package_TO_SOT_SMD:SOT-223-3_TabPin2U4
1LD1117S50TR_SOT223Package_TO_SOT_SMD:SOT-223-3_TabPin2U3
1Mot1Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ1
1Mot2Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ2
1PMODConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ4
1~pico-ice-pmod:pico-ice-pmod_verticalU1

Similar boards

  • 4 layers60 × 90 mmNRF beacon, the printed circuit board in 3D

    NRF beacon

    mathiasekse/IELS2003_PCB

    PCB-relaterte filer til Ingeniørprosjekt III

    72 parts
  • 2 layers110 × 171 mmEsp32pcbbot, the printed circuit board in 3D

    Esp32pcbbot

    Storby42/ESP32bot

    44 parts
  • 2 layers65 × 30 mmSX1255 HAT hw, the printed circuit board in 3D

    SX1255 HAT hw

    M17-Project/SX1255_HAT-hw

    Raspberry Pi Zero shield with the SX1255 RF transceiver chip

    32 parts47
  • 2 layers65 × 30 mmSX1255 HAT, the printed circuit board in 3D

    SX1255 HAT

    Jankyneering/SX1255_dev_hat

    Raspberry Pi Zero shield with the SX1255 RF transceiver chip. Based on M17's design.

    42 parts2CC-BY-SA-4.0
  • 2 layers65 × 30 mmLoRaFlux RF HAT, the printed circuit board in 3D

    LoRaFlux RF HAT

    MAHESH-THILAK-K/ADDITIONAL-PROJECT

    34 parts1Apache-2.0
  • 2 layers56 × 65 mmSeaTalk1, the printed circuit board in 3D

    SeaTalk1

    dotnet/iot

    This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.

    24 parts2.4kMIT
  • 2 layers26.2 × 45.5 mmPL18 multiprotocol, the printed circuit board in 3D

    PL18 multiprotocol

    pascallanger/DIY-Multiprotocol-TX-Module

    Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.

    24 parts1.9kGPL-3.0
  • 2 layers58 × 35.5 mmHat, the printed circuit board in 3D

    Hat

    menloresearch/asimov-1

    v1 of Asimov, an open-source humanoid robot

    24 parts1.4kCERN-OHL-S-2.0

Questions

What parts does the Pico ice bot v1 use?

24 parts, built around the 06035G104ZAT2A, 12BHC186P1-GR, KDV12FR180ET and 2M1-T2-3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pico ice bot v1 KiCad files?

From the fred-corp/pico-ice-bot repository on GitHub, at the commit this page was made from: the board is PCB/pico-ice-bot_v1/pico-ice-bot_v1.kicad_pcb and its schematic PCB/pico-ice-bot_v1/pico-ice-bot_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pico ice bot v1 design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).