

Pico ice bot v1
A simple robot chassis bot for the Pico-ICE FPGA dev board.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 42
- Pads
- 118
- Tracks, vias
- 51, 16
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Apr 2025
- Updated
- 23 Apr 2025
Overview
Pico ice bot v1 is an open-source printed circuit board by fred-corp, from the fred-corp/pico-ice-bot repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board with 24 parts on 42 nets, routed with 51 tracks and 16 vias.
It is built around the 06035G104ZAT2A, 12BHC186P1-GR and KDV12FR180ET, with the 2M1-T2-3 and 742X083101JP among its other parts. Its parts include 6 capacitors, 5 resistors, 4 ICs, 4 connectors and 1 switch. It belongs with the RP2040 boards of this library.
Main components
506035G104ZAT2A
0603-20%~+80% 100nF 50V Y5V 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSKyocera AVXMultilayer Ceramic Capacitors MLCC - SMD/SMT12BHC186P1-GR
SMD- New Arrivals ROHSEagle Plastic DevicesUncategorisedKDV12FR180ET
1206180mΩ 3.16A 500mW Current Sense Resistor SMD ±1% ±50ppm/℃ 1206 Current Sense Resistors / Shunt Resistors ROHSOhmiteCurrent Sense Resistors / Shunt Resistors2M1-T2-3
-Switch Accessories / CapsCarling Technologies742X083101JP
0603x4100Ω 4 63mW 8 ±200ppm/℃ ±5% 0603x4 Resistor Networks, Arrays ROHSCTS Electronic ComponentsResistor Networks & Arrays
README
README.mdPico ICE Bot
A simple robot chassis bot for the Pico-ICE FPGA dev board.
License & Acknowledgements
Made with ❤️, lots of ☕️, and lack of 🛌
Published under CreativeCommons BY-SA 4.0

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 06035G104ZAT2A | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C5 |
| 3 | 12BHC186P1-GR | Batteries:12BHC186P1GR | B1, B2, B3 |
| 3 | CL10A106MA8NRNC | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4, C6 |
| 3 | R_US | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5 |
| 2 | KDV12FR180ET | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 1 | 2M1-T2-3 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | 742X083101JP | Resistor_SMD:R_Array_Concave_4x0603 | RN1 |
| 1 | Conn_01x04_Socket | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | DRV8411RTER | DRV8411:QFN50P300X300X80-17N-D | U2 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | LD1117S50TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Mot1 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J1 |
| 1 | Mot2 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | PMOD | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | ~ | pico-ice-pmod:pico-ice-pmod_vertical | U1 |
Similar boards
- 4 layers60 × 90 mm

- 2 layers110 × 171 mm

- 2 layers65 × 30 mm

SX1255 HAT hw
M17-Project/SX1255_HAT-hw
Raspberry Pi Zero shield with the SX1255 RF transceiver chip
32 parts47 - 2 layers65 × 30 mm

SX1255 HAT
Jankyneering/SX1255_dev_hat
Raspberry Pi Zero shield with the SX1255 RF transceiver chip. Based on M17's design.
42 parts2CC-BY-SA-4.0 - 2 layers65 × 30 mm

- 2 layers56 × 65 mm

SeaTalk1
dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.
24 parts2.4kMIT - 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 2 layers58 × 35.5 mm

Questions
What parts does the Pico ice bot v1 use?
24 parts, built around the 06035G104ZAT2A, 12BHC186P1-GR, KDV12FR180ET and 2M1-T2-3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pico ice bot v1 KiCad files?
From the fred-corp/pico-ice-bot repository on GitHub, at the commit this page was made from: the board is PCB/pico-ice-bot_v1/pico-ice-bot_v1.kicad_pcb and its schematic PCB/pico-ice-bot_v1/pico-ice-bot_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pico ice bot v1 design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).