4 layers103.5 × 48.3 mm
ButtonBd2
frc971/electrical
This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.
165 parts3Apache-2.0
4 layers21.8 × 31.8 mm
Mag encoder
frc971/electrical3This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.
- Size
- 21.8 × 31.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 25
- Pads
- 74
- Tracks, vias
- 192, 27
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Dec 2023
- Updated
- 6 Nov 2026
Overview
Mag encoder is an open-source printed circuit board by frc971, from the frc971/electrical repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 21.8 × 31.8 mm with 24 parts on 25 nets, routed with 192 tracks and 27 vias.
It is built around the MA732GQ, AP2120N-3.3TRG1 and BSS84. Its parts include 7 resistors, 5 diodes, 3 capacitors, 2 ICs and 2 connectors.
Main components
3
MA732GQ
VQFN-16_L3.0-W3.0-P0.50-BL-EP1.6TQFN-16-EP(3x3) Position Sensors ROHSMonolithic Power SystemsPosition Sensors
AP2120N-3.3TRG1
SOT-23-40℃~+85℃@(Tj) 1 150mA 200mV@(100mA) 25uA 3.3V 30uVrms 65dB@(1kHz) 6V Fixed Over Current Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
README.mdThis repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1.00k-1%-0603 | Resistor_SMD:R_0603_1608Metric | R4, R5, R6, R7 |
| 3 | 100R-1%-0603 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 3 | 1uF-10%-25V-0603 | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H4 |
| 1 | 0015912055 | mag-encoder:Molex-70634-0039 | J2 |
| 1 | AP2120N-3.3TRG1 | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | CONFIG | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | HI | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | LO | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | MA732GQ | mag-encoder:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm | U2 |
| 1 | NRVB120VLSFT1G | Diode_SMD:D_SOD-123F | D1 |
| 1 | OK | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | ON | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | Pin | mag-encoder:pin-0.100 | H3 |
| 1 | Slot | mag-encoder:pin-0.100 | H2 |
Questions
How big is the Mag encoder PCB?
It measures 21.8 × 31.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Mag encoder use?
24 parts, built around the MA732GQ, AP2120N-3.3TRG1 and BSS84. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mag encoder KiCad files?
From the frc971/electrical repository on GitHub, at the commit this page was made from: the board is circuit-boards/shaft-encoders/mag-encoder/mag-encoder.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mag encoder design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from frc971/electrical
12- 4 layers63.5 × 63.5 mm
IMU-2X
frc971/electrical
This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.
125 parts3Apache-2.0 - 4 layers65 × 58 mm
PI Power Board
frc971/electrical
This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.
118 parts3Apache-2.0 - 4 layers76.2 × 68.6 mm
RspPiPicoIMU
frc971/electrical
This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.
113 parts3Apache-2.0 - 4 layers50.8 × 58.4 mm
Led ring driver
frc971/electrical
This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.
105 parts3Apache-2.0 - 4 layers63.5 × 63.5 mm
IMU-2X
frc971/electrical
This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.
98 parts3Apache-2.0 - 4 layers100.4 × 79 mm
NX IndicatorBoard
frc971/electrical
This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.
73 parts3Apache-2.0 - 4 layers109.9 × 79 mm
NX J401-Adapter
frc971/electrical
This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.
72 parts3Apache-2.0 - 4 layers109.9 × 79 mm
NX J401-Adapter
frc971/electrical
This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.
52 parts3Apache-2.0 - 4 layers108.1 × 79 mm
NX IndicatorBoard
frc971/electrical
This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.
44 parts3Apache-2.0 - 2 layers70.5 × 76.2 mm
PowerDistribution
frc971/electrical
This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.
24 parts3Apache-2.0 - 4 layers26.7 × 31.8 mm
Mag encoder
frc971/electrical
This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.
23 parts3Apache-2.0
Similar boards
- 4 layers19.9 × 27.7 mm
Mag encoder
RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.
26 parts1 - 4 layers85.2 × 93.7 mm
- 4 layers194 × 94 mm
- 2 layers73.9 × 56.6 mm
Thermocouple board
waterloo-rocketry/daq
Data Acquisition schematics, boards, datasheets, docs, and software
69 parts5 - 2 layers23 × 52 mm
Devboard
zPirroZ3007/devboard
Breadboard-friendly STM32F411 development board with USB-C support.
24 parts2 - 4 layers172 × 140.5 mm
- 2 layers
- 2 layers124.5 × 68 mm
