2 layers152.4 × 101.6 mm
8088-FE2010A SBC
skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset
72 parts412GPL-3.0
2 layers86.4 × 29.2 mm
Daisy 01
franeum/daisy_shield- Size
- 86.4 × 29.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 43
- Pads
- 84
- Tracks, vias
- 111, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Jan 2024
- Updated
- 29 Jan 2024
Overview
Daisy 01 is an open-source printed circuit board by franeum, from the franeum/daisy_shield repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 86.4 × 29.2 mm with 20 parts on 43 nets, routed with 111 tracks and 0 vias.
It is built around the PN2222A. Its parts include 3 connectors, 3 switches, 2 capacitors, 2 resistors and 1 IC.
Main components
1README
README.mddaisy_shield
http://tinyurl.com/yltugymq /home/neum/.var/app/org.kicad.KiCad/
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | R_Potentiometer | Potentiometer_THT:Potentiometer_Alps_RK097_Single_Horizontal | RV1, RV2, RV3, RV4 |
| 2 | MountingHole_2.5mm | MountingHole:MountingHole_2.5mm | screw1, screw2 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 220uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | AudioInput | Daisy_Electrosmith:mono_jack | J1 |
| 1 | AudioOutput1 | Daisy_Electrosmith:mono_jack | J2 |
| 1 | AudioOutput2 | Daisy_Electrosmith:mono_jack | J3 |
| 1 | Battery_Cell | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | BT1 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | PN2222A | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | RotaryEncoder_Switch | personal_footprints:ec11_encoder_mio | SW2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_1P1T_6x3.5mm_H5.0_APEM_MJTP1250 | SW3 |
| 1 | SW_SPST | TestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mm | SW1 |
| 1 | ~ | Library_electrosmith:Device_Audio_Electrosmith_Daisy_Seed | U1 |
Questions
How big is the Daisy 01 PCB?
It measures 86.4 × 29.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Daisy 01 use?
20 parts, built around the PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Daisy 01 KiCad files?
From the franeum/daisy_shield repository on GitHub, at the commit this page was made from: the board is daisy_01/daisy_01.kicad_pcb and its schematic daisy_01/daisy_01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Daisy 01 design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers33.7 × 66 mm
Smartbell
Staacks/there.oughta.be
Projects featured on my blog at https://there.oughta.be
27 parts108GPL-3.0 - 4 layers100 × 100 mm
- 2 layers30.7 × 76.1 mm
Repeater v2
plusvic/simplebus2-intercom
General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.
17 parts95CC0-1.0 - 2 layers28.8 × 43.8 mm
- 2 layers23.2 × 52.1 mm
- 4 layers184.2 × 169.5 mm
- 2 layers49.5 × 30 mm
