4 layers160 × 100 mm
OSM env01
devtank-ltd/kicad_osm_env01
This documentation describes Open Hardware and is Licensed under CERN-OHL-W v2.
243 parts
2 layers101.6 × 101.6 mm
ModularLed
francoiscampbell/Modular-Led-Cube- Size
- 101.6 × 101.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 173
- Nets
- 219
- Pads
- 709
- Tracks, vias
- 210, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 20 Apr 2016
- Updated
- 20 Apr 2016
Overview
ModularLed is an open-source printed circuit board by francoiscampbell, from the francoiscampbell/Modular-Led-Cube repository on GitHub. It is a 2-layer board of 101.6 × 101.6 mm with 173 parts on 219 nets, routed with 210 tracks and 0 vias.
It is built around the ATMEGA328P-AU, TLC5941RHB and ISL83485IP, with the 74LS139PC, FDS4935BZ and BAT54 among its other parts. Its parts include 22 resistors, 13 ICs, 12 capacitors, 11 connectors and 3 diodes. It belongs with the ESP8266 and AVR (ATmega, ATtiny) boards of this library.
Main components
6
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
TLC5941RHB
VQFN-32-EP(5x5)-40℃~+85℃ 0V~17V 1% 16 30MHz 3V~5.5V 80mA Built-in Over-Temperature Protection (OTP) PWM VQFN-32-EP(5x5) LED Drivers ROHSTexas InstrumentsLED Drivers
ISL83485IP
PDIP-8Enable shutdown、Overcurrent Protection、Thermal shutdown protection、Low-power mode、Tx/Rx enable PDIP-8 RS-485 / RS-422 ICsRenesas ElectronicsRS-485 / RS-422 ICs
74LS139PC
PDIP-1622ns 74LS 8mA Decoder Single Supply PDIP-16 Signal Switches, Multiplexers, DecodersonsemiSignal Switches, Multiplexers, Decoders
FDS4935BZ
SO-8-55℃~+150℃ 1.36nF 1.6W 1.9V 2 P-Channel 200pF 22mΩ@10V 30V 40nC 6.9A SO-8 MOSFETs ROHSonsemiMOSFETs
BAT54
SOT-23200mA 2uA@25V 30V 800mV@100mA Independent SOT-23 Schottky Diodes ROHSFOSANSchottky Diodes
README
README.mdModular LED Cube
!!!This is a work in progress!!!
A PCB with 4x4 columns of LEDs that can be attached in a coplanar fashion with others to increase the size. Supports up to 16x16 modules with up to 64 rows each, making up to a 64x64x64 cube.
Parts
173| Qty | Value | Footprint | References |
|---|---|---|---|
| 80 | 2_54_1_0 | Wire_Pads:wirepad-2_54_1_0 | PAD101, PAD102, PAD103, PAD104, PAD105, PAD106, PAD107, PAD108, PAD109, PAD110, PAD111, PAD112, PAD113, PAD114, PAD115, PAD116 +64 |
| 32 | FDS4935BZ | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | M301, M302, M303, M304, M305, M306, M307, M308, M401, M402, M403, M404, M405, M406, M407, M408 +16 |
| 19 | 10k | Resistors_SMD:R_0603_HandSoldering | R102, R103, R105, R106, R107, R108, R109, R110, R111, R112, R113, R114, R115, R201, R701, R702 +3 |
| 11 | 0.1uF | Capacitors_SMD:C_0603_HandSoldering | C102, C103, C104, C201, C301, C401, C501, C601, C701, C702, C703 |
| 4 | 74154 | Housings_SOIC:SOIC-24_7.5x15.4mm_Pitch1.27mm | U301, U401, U501, U601 |
| 3 | BAT54 | TO_SOT_Packages_SMD:SOT-23 | D101, D701, D702 |
| 3 | CONN_01X06 | Pin_Headers:Pin_Header_Angled_1x06 | P106, P108, P701 |
| 2 | 120R | Resistors_SMD:R_0603_HandSoldering | R101, R706 |
| 2 | 74LS283 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U104, U105 |
| 2 | CONN_01X04 | Socket_Strips:Socket_Strip_Angled_1x04 | P101, P103 |
| 2 | CONN_01X04 | Pin_Headers:Pin_Header_Angled_1x04 | P102, P104 |
| 2 | CONN_01X06 | Socket_Strips:Socket_Strip_Angled_1x06 | P105, P107 |
| 2 | ISL83485 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U101, U702 |
| 1 | 100uF | Capacitors_SMD:c_elec_3x5.3 | C101 |
| 1 | 2k | Resistors_SMD:R_0603_HandSoldering | R104 |
| 1 | 74LS139 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U201 |
| 1 | ATMEGA328P-A | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | IC101 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03 | P109 |
| 1 | ESP-12 | ESP8266:ESP-12 | U701 |
| 1 | POWER_JACKPTH | SparkFun-Connectors:SparkFun-Connectors-POWER_JACK_PTH | J101 |
| 1 | R-78E-0.5 | Converters_DCDC_ACDC:R-78E-0.5 | U102 |
| 1 | TLC5941 | MyLibrary:MyLibrary-TSSOP28-GROUNDPAD | U103 |
Questions
How big is the ModularLed PCB?
It measures 101.6 × 101.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ModularLed use?
173 parts, built around the ATMEGA328P-AU, TLC5941RHB, ISL83485IP and 74LS139PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ModularLed KiCad files?
From the francoiscampbell/Modular-Led-Cube repository on GitHub, at the commit this page was made from: the board is modularLed.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ModularLed design in my own project?
Its repository states no licence, so its author keeps all rights: ask francoiscampbell before reusing the design.
Similar boards
- 2 layers143 × 74 mm
Lpa
taborlab/LPA-hardware
CAD files and firmware of the LPA, and imager-based calibration script.
81 parts11 - 4 layers143 × 74 mm
Kitspace lpa96
PCBench/PCBench
resolution = [0.5, 0.5] pcbfolder = '../PCBs/' pcbnames = ["1Bitsy1bitsy"] iters = 30 env = PCBRoutingEnv(resolution=resolution, pcbfolder=pcbfolder, pcbnames=pcbnames) obs, info = env.reset() for in range(iters): act =…
161 parts21MIT - 2 layers94 × 85 mm
- 4 layers225.5 × 111.5 mm
- 4 layers
- 2 layers70 × 50 mm
Silent audio motion
akornsys-rdi/silent-audio-motion
Silent audio motion, the system behind «Hablar no es ver» artwork
82 partsGPL-3.0 - 2 layers100 × 150 mm
I2c moist sensor pannel
Miceuz/i2c-moisture-sensor
I2C based soil moisture sensor
140 parts258Apache-2.0