Skip to the content
2 layers78.8 × 85.4 mmISS VP2 Datalog, the printed circuit board in 3D

ISS VP2 Datalog

fr4sw/ISS_VP2_Datalog

Datalogger pour ISS_V2 et Meshtastic

Size
78.8 × 85.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
36
Nets
50
Pads
170
Tracks, vias
447, 31
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
30 Jul 2026
Updated
3 Oct 2026

Overview

ISS VP2 Datalog is an open-source printed circuit board by fr4sw, from the fr4sw/ISS_VP2_Datalog repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 78.8 × 85.4 mm with 36 parts on 50 nets, routed with 447 tracks and 31 vias.

It is built around the THVD1439VD, DS3231MZ+TRL and RFM95W-868S2, with the ECE-A1AN101X, CF14JT1K00 and MFR-25FTE52-22R among its other parts. Its parts include 13 resistors, 9 connectors, 6 ICs, 3 capacitors and 2 transistors. It belongs with the sensors and measurement and radio and wireless boards and the nRF52 and nRF5x boards of this library.

Main components

12

README

hardware/README.md

MeteoRoi_2026_VP2_Meshtastic

Projet BTS CIEL ER basé sur les ISS des Station Davis VantagePro2 fil ou sans fil, destiné à étendre la portée avec Meshtastic(série) et contenir datalogger, SD, GPS, RTC.

STATUT

Première version reçue et partiellement testé (cf issues) (30/6/2026)

Pas encore réalisé ni testé - en attente de livraison du PCB et des composants (26 mai 2026).

Outils_Logiciels

Kicad 9.0.9 a été utilisé.

Auteurs

le PCB a été conçu par l'enseignant M.Chapdelaine, faute de conception dans les temps par les étudiants.

Micro-controleur

Pour des raisons d'économie d'énergie le choix s'est porté sur un nRF52840, largement utilisé dans les répéteurs autonomes meshtastic pour sa faible consommation  Le modele SeedStudio xiao standard a été choisi

Périphériques

l'UART est multiplexée par un commutateur analogique :

  • le GPS n'est utilisé qu'une fois par jour pour récupérer l'heure exacte, durant ce temps on peut ne pas émettre en Meshtastic

Le RTC a été dupliqué sous forme de Pins pour insérer un module car les chip DS3231M se sont avérés etre des Fakes et le cout d'un module est inférieur au cout du chip !

Internes

I2C :

SDA : P1.12 SCL : P1.13

RTC : DS3231M - I2C - ?  Pression (et température, humidité interne) : Carte BMP680 - I2C - 0x77   SPI (le port 0 est plus rapide):

SCK = P0.02 MOSI = P0.03 MISO = P0.28

µSD : SPI, CS = P0.29   RS485 : Lien avec ISS filaire - UART (Rx seulement), toute les 2,5s ou un peu plus selon le numéro d'ISS  Rx sur P0.04 (le port 0 permet des interruptions) RFM95W (SX12xx) : SPI (pour ISS sans fil) (risque d'interférence avec le Meshtastic (même bande, mais pas même modulation)  le CS utilise le meme port que la réception RS485 (soit on est en filaire, soit en sans fil) On peuple soit R8 soit R10, on peut effectuer une détection en se mettant en réception et en regardant si on reçoit l'ISS (toutes les 2,5s), ou en mesurant si on reçoit le pull-up R9 (plus douteux)

Externes

GPS : quelconque : UART (seulement Tx vers Rx µC)  Meshtastic : Quelconque : UART  RX = P1.15 (utilisé pour GPS ou Meshtastic) Tx = P1.14 (utilisé seulement pour Meshtastic

Multiplexage UART

Le GPS et Meshtastic partagent l'UART, la sélection s'effectue par Mesh_EN

Commandes alimentation

Les plus gros consommateurs peuvent etre activés à la demande (actif 0) 
GPS_EN : P0.05 
Meshtastic_EN : P1.11

Alimentation Batterie/USB

Le Xiao simple ne permet pas une gestion fine de plusieurs alimentations et ne dispose que d'une entrée alimentation (différente de 3,3V) partagée avec l'alimentation USB, un cavalier a été prévu pour éviter les drames lors de l'utilisation d'une allimentation externe (batterie), ce cavalier est à enlever IMPERATIVEMENT avant branchement sur USB, sous peine de destruction/explosion du port USB et/ou de la batterie

Ce cavalier est nécessaire pour alimenter le meshtastic en l'absence de batterie.

Parts

36
QtyValueFootprintReferences
2100nCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC2, C3
21kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1, R4
222Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR8, R10
2470KResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR2, R3
247KResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR9, R12
24K7Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR6, R7
2AO3401APackage_TO_SOT_SMD:SOT-23Q1, Q2
1100nCapacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mmC1
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR11
122Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR13
14053Package_DIP:DIP-16_W7.62mm_LongPadsU2
1470KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR5
1Alim_connectorConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ3
1BME680 pimoroni breakout gardenConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ7
1Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6
1DS3231MZPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU5
1E5566-Q0LK22-LEmpreinte_Crée:RJ_CONN6_E5566_PULJ5
1GPSConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1Jumper_2_OpenConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1
1MeshtasticConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1RFM95W-868S2RF_Module:HOPERF_RFM9XW_THTU4
1RTC externeConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ10
1RTC externeConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ8
1SMA-J-P-H-ST-EM1empreinte:SAMTEC_SMA-J-P-H-ST-EM1J4
1THVD1439VPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU6
1XIAO-nRF52840-DIPXIAO_Empreinte:XIAO-nRF52840-DIPU3
1~Empreinte_Crée:BME680BME_1
1~Battery:BatteryHolder_MYOUNG_BS-07-A1BJ001_CR2032BatteryHolder1
1~empreinte:MicroSD-AdapterU1

Similar boards

  • 4 layers426 × 182.3 mmDboards-02, the printed circuit board in 3D

    Dboards-02

    QuantumMatter/Rumission

    Measuring methane emissions from ruminant agriculture

    371 parts
  • 2 layers271.8 × 78.7 mmPCPI AppliCard, the printed circuit board in 3D

    PCPI AppliCard

    baldengineer/bit-preserve

    Project for capturing vintage, classic, aka old computer schematics in KiCad.

    82 parts446
  • 2 layers300 × 20 mmExternal PCB, the printed circuit board in 3D

    External PCB

    Hackuarium/simple-spectro

    Very cheap, autonomous and precise spectrophotometer for DIY biology and chemistry.

    5 parts57
  • 2 layers150 × 124 mmICU festiwal, the printed circuit board in 3D

    ICU festiwal

    hs3city/rerenesans_pcb

    The Re:renesans PCB was created during workshops at Hackerspace Trójmiasto, prepared for the Re:renesans hackathon.

    110 partsCERN-OHL-P-2.0
  • 2 layers66 × 64 mmPcbignicao, the printed circuit board in 3D

    Pcbignicao

    Serra-Rocketry/ignitor

    [Propulsion] Remote ignition system for rocket motors.

    33 partsGPL-3.0
  • 4 layers100 × 100 mmLEOS F26-power, the printed circuit board in 3D

    LEOS F26-power

    VIP-LES/leos-F26-power-pcb

    power board made in fall 2026

    64 parts
  • 2 layersChargingPCB26(THT), the printed circuit board in 3D

    ChargingPCB26(THT)

    LSUTigerRacing/Electronics

    This repository contains all of the KiCad Schematics for the 2026 TigerRacing Formula SAE's Electronics Subsystem.

    46 parts8
  • 2 layers33.5 × 37 mmSumpPump, the printed circuit board in 3D

    SumpPump

    aidanogr/SumpPumpActivityMonitorPCB

    Transforms 7.7Vrms transformed signal from sump pump and converts it to 3VAC to be read by GPIO

    9 partsGPL-3.0

Questions

How big is the ISS VP2 Datalog PCB?

It measures 78.8 × 85.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ISS VP2 Datalog use?

36 parts, built around the THVD1439VD, DS3231MZ+TRL, RFM95W-868S2 and ECE-A1AN101X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ISS VP2 Datalog KiCad files?

From the fr4sw/ISS_VP2_Datalog repository on GitHub, at the commit this page was made from: the board is hardware/ISS_VP2_Datalog.kicad_pcb and its schematic hardware/ISS_VP2_Datalog.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ISS VP2 Datalog design in my own project?

Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).